Product Documentation

LB ERRORS

Sep 08, 2016

LB ERRORS

Error Code Error Code(Decimal) Error Code(Hex) Error Message
NSERR_SLESSLB_LBMETHOD_NOTSUPPORTED
1280
0x500
Incompatible LB method for sessionless vserver
NSERR_SLESSLB_PERSIST_NOTSUPPORTED
1281
0x501
Incompatible persistence method for sessionless vserver
NSERR_SLESSLB_TYPE_NOTSUPPORTED
1282
0x502
Sessionless vserver must be of type ANY, DNS or UDP
NSERR_SLESSLB_MODE_NOTSUPPORTED
1283
0x503
Sessionless vserver must have MAC or IPTUNNEL mode set
NSERR_SLESSLB_SVC_USIPNOTSET
1284
0x504
Service bound to a sessionless vserver must have UseSourceIP mode enabled
NSERR_WILDCARDVIP_LBMETHOD_INVAL
1286
0x506
Invalid LB method for a wildcard vserver
NSERR_WILDCARDVIP_PERSIST_INVAL
1287
0x507
Invalid persistence policy for a wildcard vserver
NSERR_LB_SO_THRESHOLD
1288
0x508
Spill-over threshold should be a non-zero value
NSERR_CONNFAILOVER_USIP
1289
0x509
Service must have Use Source IP option set in order to be bound to a connection failover enabled virtual server
NSERR_CONNFAILOVER_SERVICE
1290
0x50a
Connection failover can only be enabled on a virtual server of service type ANY
NSERR_LB_SO_DYNAMICCON_THRESHOLD
1291
0x50B
Spill-over threshold cannot be set for dynamic connection spill-over method
NSERR_LB_SO_ADDRVIP
1292
0x50C
DYNAMICCONNECTION spill-over cannot be set on a non-LB vserver
NSERR_CONNFAILOVER_NOTFOR_SLESS
1293
0x50d
Connection Failover is not supported for sessionless lb vserver\n
NSERR_NEWSVC_PERCENT_CAPPED
1294
0x50e
Percentage value of requests capped at 100
NSERR_SIP_NOCALLID
1296
0x510
Missing Call-ID header field
NSERR_SIP_NOVIA
1297
0x511
Missing Via header field
NSERR_SIP_NOCSEQ
1298
0x512
Missing CSeq header field
NSERR_SIP_NOTO
1299
0x513
Missing To header field
NSERR_SIP_NOFROM
1300
0x514
Missing From header field
NSERR_SIP_NOMAX_FORWARDS
1301
0x515
Missing Max-Forwards header field
NSERR_SIP_SERVICE_UNAVAILABLE
1302
0x516
Service unavailable
NSERR_SVC_NOT_BOUND
1303
0x517
Service not bound to Vserver
NSERR_SVCTYPE_MISMATCH
1304
0x518
Service type mismatch between the vserver and service
NSERR_CH_CON_NOT_ALLOWED
1305
0x519
CONNECTION header cannot be set
NSERR_LBPROFILE_DBS
3572
0xdf4
DBSLB setting of LB profile cannot be changed with vservers associated with it
NSERR_LBPROFILE_EXIST
3573
0xdf5
LB profile already exists
NSERR_LBPROFILE_NOENT
3574
0xdf6
LB profile doesn't exist
NSERR_LBPROFILE_NOMEM
3575
0xdf7
Cannot allocate memory for LB profile
NSERR_LBPROFILE_VSERVERSET
3576
0xdf8
Cannot set vserver params which is associated with LB profile
NSERR_CH_INCOMPLETE_HDR
1312
0x520
Custom Header string should end with CRLF
NSERR_SPILLOVERDISABLED
1313
0x521
No spillover on the vserver due to max client setting '0' on a bound service
NSERR_MAXTIMEEXCEEDED
1314
0x522
Maximum time value for interval or responsetimeout or downtime is exceeded, rounding to maximum
NSERR_SCINVALPROTO
1315
0x523
Cannot bind SC policy to non-HTTP service or vserver
NSERR_ROOTREC
1316
0x524
Atleast one nameserver record should exist for the root domain
NSERR_ROOT_GLUEREC
1317
0x525
Root domain nameserver address record should have atleast one ip address
NSERR_VIPINSERT_NOT_SUPPORTED
1356
0x54c
Vserver IP and port header insertion option not supported on this vserver.
NSERR_VSVR_ALRDY_BOUND
1318
0x526
This vserver is already bound to a WLM
NSERR_INVALID_WLM_BINDING
1319
0x527
Only LB vservers are allowed to bound to WLM
NSERR_VSVR_NOT_BOUND
1320
0x528
Vserver not bound to WLM
NSERR_WLM_EXISTS
1321
0x529
WLM already configured on this IP, port
NSERR_INVALID_TIMEOUT
1322
0x52a
Invalid persistence timeout: default timeout assigned
NSERR_CONNFAILOVER_INCMODE
1323
0x52b
Stateful connection failover cannot be enabled in INC mode
NSERR_CONNFAILOVER_TCPB
1324
0x52c
Stateful connection failover cannot be enabled on a vserver that binds services with TCP buffering enabled
NSERR_CONNFAILOVER_TCPB_SVC_BIND
1326
0x52e
Service with TCP buffering enabled cannot be bound to a vserver with stateful connection failover enabled
NSERR_CONNFAILOVER_TCPB_SVC_PARAM
1327
0x52f
TCP buffering cannot be enabled on a service bound to a vserver with stateful connection failover enabled
NSERR_CONNFAILOVER_SERVICE_STATEFULL
1328
0x530
Stateful connection failover cannot be enabled on a vserver of this service type
NSERR_CONNFAILOVER_SSL_SVC_BIND
1329
0x531
SSL TCP service cannot be bound to a TCP vserver with stateful connection failover enabled
NSERR_CONNFAILOVER_HA_INC_NODE
1330
0x532
Ha node with INC mode enabled cannot be added to the system that has vserver(s) with stateful connection failover enabled
NSERR_CONNFAILOVER_SSL_SVC
1331
0x533
Stateful connection failover cannot be enabled on a vserver that binds services of type SSL_TCP
NSERR_INVALID_PERSISTENCE
1332
0x534
Invalid Persistence type
NSERR_RTSPSESSION_INVALID
1333
0x535
Invalid RTSP session entry
NSERR_LB_METHOD_SAMEAS_BACKUP_METHOD
1334
0x536
Backup load balancing method cannot be the same as the primary load balancing method
NSERR_SERVER_EXIST
1335
0x537
Server already exists
NSERR_LB_SO_HEALTH
1336
0x538
HEALTH spill-over cannot be set on a non-LB vserver
NSERR_REQ_RULE_MISSING
1337
0x539
Request Rule is required, when Response rule is specified.
NSERR_CONNFAILOVER_BINDLO
1338
0x53a
Loopback service cannot be bound to vserver with connection failover enabled \n
NSERR_CONNFAILOVER_SETWITHLO
1339
0x53b
Connection Failover cannot be set to STATEFUL/STATELESS on vserver with bound loopback service\n
NSERR_REDIRECT_URL_NOT_APPLICABLE
1340
0x53c
Redirect URL cannot be configured on this vserver.
NSERR_STATEFUL_CONNFAILOVER_IPV6
1341
0x53d
Stateful connection failover cannot be enabled on an IPv6 vserver
NSERR_CONNFAILOVER_NOT_SUPPORTED
1342
0x53e
Connection Failover is not supported for pattern based vservers
NSERR_NOBIND_ONPUSH
1343
0x53f
Bindings not allowed on push vserver
NSERR_PUSH_VSVR
1344
0x540
Option cannot be set on push vserver
NSERR_ONLY_HTTPSSL
1345
0x541
Option can only be set on http/ ssl vserver
NSERR_PUSH_BIND_EXISTS
1346
0x542
A push vserver is already bound. Unbind before binding new vserver
NSERR_SET_PUSHVS_ONLY
1347
0x543
Push vserver should be of type push or ssl_push only
NSERR_SLESS_NO_SUPPORT
1348
0x544
Not supported for sessionless vservers
NSERR_CONNFAILOVER_V6SERVICE
1349
0x545
Connection Failover cannot be set to STATEFUL on vserver with IPv6 services bound
NSERR_CONNFAILOVER_VSERVER
1350
0x546
IPV6 service cannot be bound to vserver with connection failover set to STATEFUL
NSERR_LISTEN_POLICY_BIND
1351
0X547
Error in binding listen policy to vserver(normal vserver already present)
NSERR_NO_LISTEN_POLICY_FOR_DUMMYVS
1352
0x548
Cannot bind listen policy to dummy vservers
NSERR_LISTEN_POLICY_BIND_PRESENT
1353
0X549
Error in binding listen policy to vserver(vserver with new priority already present)
NSERR_NO_LISTEN_PRI
1354
0X54a
Error in binding listen priority to normal vserver
NSERR_NORMAL_VS_NONE_LISTENPOL
1355
0x54b
The vserver already has None Listen Policy\n
NSERR_NO_LISPRI_FOR_NONE_LISPOL
1357
0x54d
None listenpolicy doesnot have listen priority\n
NSERR_INVALID_POLICY_STRING
1358
0x54e
Invalid listenpolicy entered\n
NSERR_NODATALENOFFFORVS
1359
0x54f
Dataoffset and datalength are not required for this vserver\n
NSERR_LBGRPPERSISWITHRDP
1285
0x505
Persistency is not applicable for RDP vserver or LB group which has RDP vserver part of it
NSERR_CS_SOTHRESHOLD
1370
0x55a
Spillover threshold must be given with spillover method in Content Switching vserver
NSERR_INVALID_INSERTVSERVERIPPORT
1392
0x570
V6TOV4MAPPING is not applicable to ipv4 vserver
NSERR_LB_SERVER_NOTEXIST
1388
0x56c
The Target LB Vserver does not exist
NSERR_BOUNDTO_CSACT
1371
0x55b
The Vserver referred by Content Switching action cannot be removed
NSERR_BOUNDTO_CSPOLICY
1372
0x55c
The Content Switching Action bound to Content Switching Policy cannot be removed
NSERR_INVALID_MULTIPLEBIND
1373
0x55d
Multiple Bind not supported for Content Switching Advanced policies without action
NSERR_CSPOLICY_HASACTION
1374
0x55e
LB vserver/gotoPriorityExpression/invoke not allowed during bind when content swtiching policy already has an action.
NSERR_CS_NOTSUPPORT_LB
1375
0x55f
The Protocol of given LB vserver is not supported by Content Switching action
NSERR_ACTION_NOTNOOP_CS
1386
0x56a
Do not provide gotoPriorityExpression/invoke because policy has action
NSERR_CSPOLICY_NOACTION
1387
0x56b
Either LB vserver or GotoPriorityExpression or Invoke must be provided while binding a Content Switching policy without action.
NSERR_CSPEPOLICY_SETNOACTION
1389
0x56d
Content Switching classic policy does not support action
NSERR_POLICY_USED_FOR_INVOKE
1390
0x56e
Do not give target LB beacuse the policy has been bound to multiple entities
NSERR_SPECIFY_BACKUP_NODE
1393
0x571
Please specify the backup node.
NSERR_SAME_NODES
1394
0x572
Owner and backup nodes need to different.
NSERR_INCOMPATIBLE_POLICY_SERVER_TYPE
1391
0x56f
Content switching vserver service type is not compatible with given policy expression
NSERR_PEPOLICY_BIND_NOTALLOWED
1395
0x573
Binding of classic content switching policy to content switching policylabel is not allowed
NSERR_TCPKA_IDLETIME_TOO_LOW
1396
0x574
Connection idle time cannot be lower than keep-alive probe interval
NSERR_OWNER_NODE_NOT_IN_CLUSTER
1397
0x575
Owner node is not in the cluster config or is NOT ACTIVE
NSERR_BACKUP_NODE_NOT_IN_CLUSTER
1398
0x576
Backup node is not in the cluster config or is NOT ACTIVE
NSERR_SPOTTED_VSERVER_NOT_SUPPORTED_IN_STANDALONE
1399
0x577
Spotted vserver configuration not supported in standalone or HA deplyoment
NSERR_SPOTTED_CONFIG_NO_MATCH
1400
0x578
Spotted config of the backup verser does not match the vserver
NSERR_OPTION_NOT_SUPPORTED
1401
0x579
Skip persistency is supported only for ANY and UDP service types
NSERR_OPTION_NOT_SUPPORTED_IP
1402
0x57a
BYPASS is not supported for IP based vservers
NSERR_OWNER_NODE_NOT_SET
1403
0x57b
Owner node should be specified for cluster
NSERR_INVALID_RENAME
1404
0x57c
Rename is supported only for Advanced policies
NSERR_INVAL_LOCAL_NAMSVR_TYPE
1405
0x57d
Only UDP based local nameservers are allowed
NSERR_INVALID_TFTPORT
1406
0x57e
Invalid port for tftp vserver
NSERR_NO_RENAME
1407
0x57f
No Rename Supported
NSERR_USE_BINDCR_CMD
88
0x58
Use Bind CR command to bind CR Vserver instead of Bind CS
NSERR_LBREFFERED_IN_CSBINDING
1409
0x581
Cannot remove LB Vserver which is reffered in CS policy bindings
NSERR_DEFAULTLB_NOT_BOUND
1410
0x582
default LB mentioned is not bound
NSERR_NG_BIND_ENTITY
1411
0x583
Error binding the node group to an entity
NSERR_ENTITY_BOUND_TO_ANOTHER_NG
1412
0x584
The specified entity is already bound to a different node group
NSERR_ENTITY_ALREADY_BOUND
1413
0x585
The specified entity is already bound to this node group
NSERR_ENTITY_NOT_BOUND_TO_NG
1414
0x586
The specified entity is not bound to any node group
NSERR_NG_NOT_FOUND
1415
0x587
Nodegroup is not found
NSERR_NG_HAS_BINDINGS
1416
0x588
Nodegroup cannot be deleted, it has entities bound to it
NSERR_VSERVER_CANNOT_BIND
1417
0x589
Vserver cannot bind to the nodegroup
NSERR_VSERVER_CANNOT_UNBIND
1418
0x58a
Vserver cannot unbind to the nodegroup
NSERR_NG_CANNOT_BE_STRICT
1419
0x58b
Nodegroup cannot be made strict as there are no nodes bound to it, but entities are bound
NSERR_NG_STRICT_AND_ZERODEPTH
1420
0x58c
Cannot bind an entity to a strict nodegroup with no nodes bound to it
NSERR_UNBINDING_LAST_NODE_FROM_STRICT_NG
1421
0x58d
Cannot unbind the last node from a strict nodegroup with entities bound to it
NSERR_NG_ALREADY_ADDED
1422
0x58e
Nodegroup is already added
NSERR_NG_ENTITY_NOMEM
1423
0x58f
No memory to establish entity to nodegroup association
NSERR_NG_MAX_CONFIGURED
1424
0x590
Cannot add nodegroup; maximum number of nodegroups already added
NSERR_INVAL_CS_ACTION
1425
0x591
Action given is not a CS action
NSERR_SET_CSACTION_DISALLOWED
1426
0x592
Set disallowed for CS action from Target LB/targetVserver to Target Expression and vice versa
NSERR_RETAIN_VLAN
1427
0x593
macmoderetainvlan applicable only for wildcard(IP and port) macmode vserver
NSERR_BIND_BDGGROUP_SYNCVLAN
1428
0x594
Sync vlan cannot be bound to bridgegroup
NSERR_DEL_SYNCVLAN
1429
0x595
Sync vlan cannot be deleted
NSERR_CSPEPOL_PARTITION_NOT_ALLOWED
1430
0x596
Current NON-default partition only supports Advanced Polices.
NSERR_LESSTHAN_PPE
1438
0x59e
Max/Min Reusepool connections should be greater than or equal to running Packet Engines.
NSERR_MCLIMITS
1295
0x50f
Dummy error to avoid issues when upgrade done from 9.3.
NSERR_SIP_BAD_REQUEST
1431
0x597
Invalid SIP request.
NSERR_SIP_NO_CONTENT_LEN
1432
0x598
No content length present.
NSERR_SIP_RET_MAX_INCOM_LEN
1433
0x599
SIP InComp max limit reached.
NSERR_SIP_RET_RETRY
1434
0x59a
SIP packet retry.
NSERR_SIP_RET_NO_MEM
1435
0x59b
SIP no memory available.
NSERR_SIP_RET_HEADER_NOT_COMPLETE
1436
0x59c
Incomplete SIP headers.
NSERR_SIP_RET_FAILURE
1437
0x59d
SIP operation failed.
NSERR_CS_GSLB_DEFAULT
1439
0x59f
Default vserver type mismatch
NSERR_CS_GSLB_DNSRT_MISMATCH
1306
0x51a
DNSrecordType of CS GSLB vserver and Target Vserver should be same.
NSERR_CS_GSLB_INVALID_TARGET
1307
0x51b
CS Vserver of type GSLB can only have GSLB vserver as Target.
NSERR_CS_GSLB_POLICY_NO_ACTION
1308
0x51c
CS Policy has no action or CS action doesn't have targetVserver
NSERR_GSLB_SVC_ALREADY_BOUND_TO_CS
1309
0x51d
GSLB service bound to targetVserver is already bound to CS vserver
NSERR_CS_POLICY_NO_RULE
1310
0x51e
Binding CS policy to CS GSLB vserver requires rule
NSERR_VIP_BACKUP_ISCSGSLB
1311
0x51f
CS GSLB vserver cannot be backup of a non- CS GSLB vserver
NSERR_VSR_BOUND
1325
0x52d
Service/servicegroup is bound to one or more vserver. Please unbind and retry the operation. Also check 'allowBoundSvcRemoval' option in lb parameter to change this behaviour.