Product Documentation

csvserver

Sep 08, 2016

Statistics for CS virtual server resource.

Properties (click to see Operations)

Name Data Type Permissions Description
name
<String>
Read-write
Name of the content switching virtual server for which to display statistics. To display statistics for all configured Content Switching virtual servers, do not specify a value for this parameter.
Minimum length = 1
clearstats
<String>
Read-write
Clear the statsistics / counters.
Possible values = basic, full
establishedconn
<Double>
Read-only
Number of client connections in ESTABLISHED state.
primaryipaddress
<String>
Read-only
The IP address on which the service is running.
primaryport
<Integer>
Read-only
The port on which the service is running.
type
<String>
Read-only
Protocol associated with the vserver
state
<String>
Read-only
Current state of the server. Possible values are UP, DOWN, UNKNOWN, OFS(Out of Service), TROFS(Transition Out of Service), TROFS_DOWN(Down When going Out of Service)
tothits
<Double>
Read-only
Total vserver hits
hitsrate
<Double>
Read-only
Rate (/s) counter for tothits
totalrequests
<Double>
Read-only
Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.)
requestsrate
<Double>
Read-only
Rate (/s) counter for totalrequests
totalresponses
<Double>
Read-only
Number of responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.)
responsesrate
<Double>
Read-only
Rate (/s) counter for totalresponses
totalrequestbytes
<Double>
Read-only
Total number of request bytes received on this service or virtual server.
requestbytesrate
<Double>
Read-only
Rate (/s) counter for totalrequestbytes
totalresponsebytes
<Double>
Read-only
Number of response bytes received by this service or virtual server.
responsebytesrate
<Double>
Read-only
Rate (/s) counter for totalresponsebytes
totalpktsrecvd
<Double>
Read-only
Total number of packets received by this service or virtual server.
pktsrecvdrate
<Double>
Read-only
Rate (/s) counter for totalpktsrecvd
totalpktssent
<Double>
Read-only
Total number of packets sent.
pktssentrate
<Double>
Read-only
Rate (/s) counter for totalpktssent
curclntconnections
<Double>
Read-only
Number of current client connections.
cursrvrconnections
<Double>
Read-only
Number of current connections to the actual servers behind the virtual server.
sothreshold
<Double>
Read-only
Spill Over Threshold set on the VServer.
totspillovers
<Double>
Read-only
Number of times vserver experienced spill over.
labelledconn
<Double>
Read-only
Number of Labeled connection on this vserver
pushlabel
<Double>
Read-only
Number of labels for this push vserver.
deferredreq
<Double>
Read-only
Number of deferred request on this vserver
deferredreqrate
<Double>
Read-only
Rate (/s) counter for deferredreq
invalidrequestresponse
<Double>
Read-only
Number invalid requests/responses on this vserver
invalidrequestresponsedropped
<Double>
Read-only
Number invalid requests/responses dropped on this vserver
totvserverdownbackuphits
<Double>
Read-only
Number of times traffic was diverted to backup vserver since primary vserver was DOWN.
curmptcpsessions
<Double>
Read-only
Current Multipath TCP sessions
cursubflowconn
<Double>
Read-only
Current Multipath TCP subflows

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/stat/csvserver

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/stat/csvserver?args=name:<String_value>,detail:<Boolean_value>,fullvalues:<Boolean_value>,ntimes:<Double_value>,logfile:<String_value>,clearstats:<String_value>

Use this query-parameter to get csvserver resources based on additional properties.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "csvserver": [ {
      "name":<String_value>,
      "curclntconnections":<Double_value>,
      "establishedconn":<Double_value>,
      "totalpktssent":<Double_value>,
      "labelledconn":<Double_value>,
      "tothits":<Double_value>,
      "totalrequests":<Double_value>,
      "sothreshold":<Double_value>,
      "cursubflowconn":<Double_value>,
      "responsebytesrate":<Double_value>,
      "invalidrequestresponsedropped":<Double_value>,
      "totalresponses":<Double_value>,
      "requestbytesrate":<Double_value>,
      "type":<String_value>,
      "hitsrate":<Double_value>,
      "cursrvrconnections":<Double_value>,
      "pktsrecvdrate":<Double_value>,
      "primaryipaddress":<String_value>,
      "pushlabel":<Double_value>,
      "responsesrate":<Double_value>,
      "deferredreq":<Double_value>,
      "curmptcpsessions":<Double_value>,
      "totspillovers":<Double_value>,
      "totalrequestbytes":<Double_value>,
      "invalidrequestresponse":<Double_value>,
      "state":<String_value>,
      "deferredreqrate":<Double_value>,
      "totalpktsrecvd":<Double_value>,
      "pktssentrate":<Double_value>,
      "totalresponsebytes":<Double_value>,
      "primaryport":<Integer_value>,
      "requestsrate":<Double_value>,
      "totvserverdownbackuphits":<Double_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/stat/csvserver/name_value><String>

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "csvserver": [ {
      "name":<String_value>,
      "curclntconnections":<Double_value>,
      "establishedconn":<Double_value>,
      "totalpktssent":<Double_value>,
      "labelledconn":<Double_value>,
      "tothits":<Double_value>,
      "totalrequests":<Double_value>,
      "sothreshold":<Double_value>,
      "cursubflowconn":<Double_value>,
      "responsebytesrate":<Double_value>,
      "invalidrequestresponsedropped":<Double_value>,
      "totalresponses":<Double_value>,
      "requestbytesrate":<Double_value>,
      "type":<String_value>,
      "hitsrate":<Double_value>,
      "cursrvrconnections":<Double_value>,
      "pktsrecvdrate":<Double_value>,
      "primaryipaddress":<String_value>,
      "pushlabel":<Double_value>,
      "responsesrate":<Double_value>,
      "deferredreq":<Double_value>,
      "curmptcpsessions":<Double_value>,
      "totspillovers":<Double_value>,
      "totalrequestbytes":<Double_value>,
      "invalidrequestresponse":<Double_value>,
      "state":<String_value>,
      "deferredreqrate":<Double_value>,
      "totalpktsrecvd":<Double_value>,
      "pktssentrate":<Double_value>,
      "totalresponsebytes":<Double_value>,
      "primaryport":<Integer_value>,
      "requestsrate":<Double_value>,
      "totvserverdownbackuphits":<Double_value>
}]}