Product Documentation

authentication dfaAction

Sep 12, 2016

The following operations can be performed on "authentication dfaAction":

add | rm | set | unset | show

add authentication dfaAction

Creates an action (profile) for a DFA server. The profile contains all configuration data necessary to communicate with that DFA server.

Synopsys

add authentication dfaAction <name> {-clientID <string>} {-serverURL <URL>} {-passPhrase } [-defaultAuthenticationGroup <string>]

Arguments

name

Name for the DFA action.

Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the DFA action is added.

clientID

If configured, this string is sent to the DFA server as the X-Citrix-Exchange header value.

serverURL

DFA Server URL

passPhrase

Key shared between the DFA server and the NetScaler appliance.

Required to allow the NetScaler appliance to communicate with the DFA server.

defaultAuthenticationGroup

This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

rm authentication dfaAction

Removes a DFA profile (action). An action cannot be removed as long as it is bound to a policy.

Synopsys

rm authentication dfaAction <name>

Arguments

name

Name of the action to be removed.

set authentication dfaAction

Configures a DFA server profile (action). The profile contains all configuration data needed to communicate with that DFA server.

Synopsys

set authentication dfaAction <name> [-clientID <string>] [-serverURL <URL>] {-passPhrase } [-defaultAuthenticationGroup <string>]

Arguments

name

Name of the RADIUS profile.

clientID

If configured, this string is sent to the DFA server as the X-Citrix-Exchange header value.

serverURL

DFA Server URL

passPhrase

Key shared between the DFA server and the NetScaler appliance.

Required to allow the NetScaler appliance to communicate with the DFA server.

defaultAuthenticationGroup

This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

unset authentication dfaAction

Use this command to remove authentication dfaAction settings.Refer to the set authentication dfaAction command for meanings of the arguments.

Synopsys

unset authentication dfaAction <name> [-clientID] [-serverURL] [-defaultAuthenticationGroup]

show authentication dfaAction

Displays the current configuration settings for the specified DFA profile (action).

Synopsys

show authentication dfaAction [<name>]

Arguments

name

Name of the DFA profile.

Outputs

passPhrase

Key shared between the DFA server and the NetScaler appliance.

Required to allow the NetScaler appliance to communicate with the DFA server.

clientID

If configured, this string is sent to the DFA server as the X-Citrix-Exchange header value.

serverURL

DFA Server URL

Success

Failure

stateflag

defaultAuthenticationGroup

This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

devno

count