Product Documentation

location

Sep 12, 2016

The following operations can be performed on "location":

add | rm | show

add location

Creates a custom location entry on the NetScaler appliance. Custom locations can be used instead of a static location database if the number of locations you need does not exceed 500. Custom locations can also be used to override incorrect entries in the static database, because the appliance searches the static database before it searches the static location database.

Synopsys

add location <IPfrom> <IPto> <preferredLocation> [-longitude <integer> [-latitude <integer>]]

Arguments

IPfrom

First IP address in the range, in dotted decimal notation.

IPto

Last IP address in the range, in dotted decimal notation.

preferredLocation

String of qualifiers, in dotted notation, describing the geographical location of the IP address range. Each qualifier is more specific than the one that precedes it, as in continent.country.region.city.isp.organization. For example, "NA.US.CA.San Jose.ATT.citrix".

Note: A qualifier that includes a dot (.) or space ( ) must be enclosed in double quotation marks.

longitude

Numerical value, in degrees, specifying the longitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Minimum value: -180

Maximum value: 180

latitude

Numerical value, in degrees, specifying the latitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Minimum value: -90

Maximum value: 90

Example

Add location 192.168.100.1 192.168.100.100 *.us.ca.san jose

rm location

Removes a custom location entry from the NetScaler appliance.

Synopsys

rm location <IPfrom> <IPto>

Arguments

IPfrom

First IP address in the range, in dotted decimal notation.

IPto

Last IP address in the range, in dotted decimal notation.

Example

rm location 192.168.100.1 192.168.100.100

show location

Displays all the custom location entries configured on the NetScaler appliance, or just the entry for the specified IP address range.

Synopsys

show location [<IPfrom>]

Arguments

IPfrom

The qualifiers in dotted notation for the ipaddress. If this value is not specified, all custom entries are displayed.

Outputs

stateflag

IPto

The end of the IP address range.

preferredLocation

The qualifiers in dotted notation for the ipaddress range.

q1label

Least specific location qualifier.

q2label

Location qualifier 2.

q3label

Location qualifier 3.

q4label

Location qualifier 4.

q5label

Location qualifier 5.

q6label

Most specific location qualifier.

longitude

Numerical value, in degrees, specifying the longitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

latitude

Numerical value, in degrees, specifying the latitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

devno

count

Example

show location