Product Documentation

vserver

Sep 12, 2016

The following operations can be performed on "vserver":

rm vserver

Use this command to remove a virtual server. NOTE: This command is deprecated.This command is deprecated in 10.0, instead you can use commands such as rm lb vserver

Synopsys

Arguments

name

The name of the virtual server to be removed.

Example

rm vserver lb_vip  To remove multiple vservers, use the following command:  rm vserver lb_vip[1-3]

set vserver

Use this command to modify the parameters for an existing virtual server. NOTE: This command is deprecated.This command is deprecated in 10.0, instead you can use commands such as set lb vserver

Synopsys

Arguments

name

The name of the virtual server for which the parameters are to be set.

pushVserver

The lb vserver of type PUSH/SSL_PUSH to which server pushes the updates received on the client facing non-push lb vserver.

Example

set vserver lb_vip -backupVServerName bkvip_lbvip  To set backup vserver for multiple vservers at once, use the following command:  set vserver lb_vip[1-3] -backupVServerName bkvip_lbvip

unset vserver

Use this command to unset the backup virtual server or the redirectURL that has been set on the virtual server..Refer to the set vserver command for meanings of the arguments.NOTE: This command is deprecated.

Synopsys

Example

unset vserver lb_vip -backupVServer        To unset the backup vserver for multiple vservers use the following command:  unset vserver lb_vip[1-3] -backupVServer

enable vserver

Use this command to enable a virtual server. Note: Virtual servers, when added, are enabled by default. NOTE: This command is deprecated.This command is deprecated in 10.0, instead you can use commands such as enable lb vserver

Synopsys

Arguments

name

The name of the virtual server to be enabled.

Example

enable vserver lb_vip  To enable multiple vservers, use the following command:         enable vserver lb_vip[1-3]

disable vserver

Use this command to disable (take out of service) a virtual server. NOTE: This command is deprecated.This command is deprecated in 10.0, instead you can use commands such as disable lb vserver

Synopsys

Arguments

name

The name of the virtual server to be disabled.

Notes:

1. The system will continue to respond to ARP and/or ping requests for the IP address of this virtual server.

2. As the virtual server is still configured in the system, you can enable the virtual server using the ###enable vserver### command.

Example

disable vserver lb_vip  To disable multiple vservers, use the following command:  disable vserver lb_vip[1-3]

show vserver

Displays information about all virtual servers configured on the appliance.

Synopsys

show vserver

Example

show vserver lb_vip