Product Documentation

cli mode

Sep 12, 2016

The following operations can be performed on "cli mode":

set cli mode

Use this command to specify how the CLI should display command output.

Synopsys

set cli mode [-page ( ON | OFF )] [-total ( ON | OFF )] [-color ( ON | OFF )] [-disabledFeatureAction <disabledFeatureAction>] [-timeout <secs>] [-regex ( ON | OFF )]

Arguments

page

Determines whether output that spans more than one screen is "paged". Specify ON to pause the display after each screen of ouput.

Possible values: ON, OFF

Default value: OFF

total

Determines whether CLI "show" commands display a total count of objects before displaying the objects themselves.

Possible values: ON, OFF

Default value: OFF

color

Specifies whether output can be shown in color, if the terminal supports it.

Possible values: ON, OFF

Default value: OFF

disabledFeatureAction

Specifies what will happen when a configuration command is issued for a disabled feature. The following values are allowed:

NONE - The action is allowed, and no warning message is issued.;

ALLOW - The action is allowed, but a warning message is issued.;

DENY - The action is not allowed.

Possible values: NONE, ALLOW, DENY

Default value: NS_ALLOW

timeout

CLI session inactivity timeout, in seconds. If Restrictedtimeout argument of system parameter is enabled, Timeout can have values in the range [300-86400] seconds and also climode timeout cannot be configured beyond admin configured value. If Restrictedtimeout argument of system parameter is disabled, Timeout can have values in the range [0, 10-100000000] seconds. Default value is 900 seconds.

Default value: -1

regex

If ON, regular expressions can be used as argument values

Possible values: ON, OFF

Default value: ON

unset cli mode

Use this command to remove cli mode settings.Refer to the set cli mode command for meanings of the arguments.

Synopsys

unset cli mode [-page] [-total] [-color] [-disabledFeatureAction] [-timeout] [-regex]

show cli mode

Use this command to display the current settings of parameters that can be set with the 'set cli mode' command.

Synopsys

show cli mode

Outputs

page

Determines whether output that spans more than one screen is "paged". Specify ON to pause the display after each screen of ouput.

total

Determines whether CLI "show" commands display a total count of objects before displaying the objects themselves.

color

Specifies whether output can be shown in color, if the terminal supports it.

disabledFeatureAction

Specifies what will happen when a configuration command is issued for a disabled feature. The following values are allowed:

NONE - The action is allowed, and no warning message is issued.;

ALLOW - The action is allowed, but a warning message is issued.;

DENY - The action is not allowed.

argMark

mark

noLicenseAction

no licence

diagLevel

diagnostic level

timeout

CLI session inactivity timeout, in seconds. If Restrictedtimeout argument of system parameter is enabled, Timeout can have values in the range [300-86400] seconds and also climode timeout cannot be configured beyond admin configured value. If Restrictedtimeout argument of system parameter is disabled, Timeout can have values in the range [0, 10-100000000] seconds. Default value is 900 seconds.

timeoutKind

From where the timeout has been inherited.

regex

If ON, regular expressions can be used as argument values

r

regular expression

format

format

stats

serverPort