Product Documentation

ica latencyprofile

Sep 12, 2016

The following operations can be performed on "ica latencyprofile":

add | rm | set | unset | show

add ica latencyprofile

This command creates an ica latencyprofile with the options specified.

Synopsys

add ica latencyprofile <name> [-l7LatencyMonitoring ( ENABLED | DISABLED )] [-l7LatencyThresholdFactor <positive_integer>] [-l7LatencyWaitTime <positive_integer>] [-l7LatencyNotifyInterval <positive_integer>] [-l7LatencyMaxNotifyCount <positive_integer>]

Arguments

name

Name for the ICA latencyprofile. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and

the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the ICA latency profile is added.

The following requirement applies only to the NetScaler CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my ica l7latencyprofile" or 'my ica l7latencyprofile').

l7LatencyMonitoring

Enable/Disable L7 Latency monitoring for L7 latency notifications

Possible values: ENABLED, DISABLED

Default value: DISABLED

l7LatencyThresholdFactor

L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported

Default value: 4

Minimum value: 2

Maximum value: 65535

l7LatencyWaitTime

L7 Latency Wait time. This is the time for which the Netscaler waits after the threshold is exceeded before it sends out a Notification to the Insight Center.

Default value: 20

Minimum value: 1

Maximum value: 65535

l7LatencyNotifyInterval

L7 Latency Notify Interval. This is the interval at which the Netscaler sends out notifications to the Insight Center after the wait time has passed.

Default value: 20

Minimum value: 1

Maximum value: 65535

l7LatencyMaxNotifyCount

L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold.

Default value: 5

Minimum value: 1

Maximum value: 65535

Example

add ica latencyprofile profile1 -l7latencythresholdfactor 4

rm ica latencyprofile

This command removes the specified ica l7latencyprofile.

Synopsys

rm ica latencyprofile <name>

Arguments

name

Name of the ICA l7latencyprofile.

Example

rm ica l7latencyprofile profile1

set ica latencyprofile

This command modifies the specified parameters of the specified ica l7latencyprofile.

Synopsys

set ica latencyprofile <name> [-l7LatencyMonitoring ( ENABLED | DISABLED )] [-l7LatencyThresholdFactor <positive_integer>] [-l7LatencyWaitTime <positive_integer>] [-l7LatencyNotifyInterval <positive_integer>] [-l7LatencyMaxNotifyCount <positive_integer>]

Arguments

name

Name of the profile that you want to modify.

l7LatencyMonitoring

Enable/Disable L7 Latency monitoring for L7 latency notifications

Possible values: ENABLED, DISABLED

Default value: DISABLED

l7LatencyThresholdFactor

L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported

Default value: 4

Minimum value: 2

Maximum value: 65535

l7LatencyWaitTime

L7 Latency Wait time. This is the time for which the Netscaler waits after the threshold is exceeded before it sends out a Notification to the Insight Center.

Default value: 20

Minimum value: 1

Maximum value: 65535

l7LatencyNotifyInterval

L7 Latency Notify Interval. This is the interval at which the Netscaler sends out notifications to the Insight Center after the wait time has passed.

Default value: 20

Minimum value: 1

Maximum value: 65535

l7LatencyMaxNotifyCount

L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold.

Default value: 5

Minimum value: 1

Maximum value: 65535

Example

set ica l7latencyprofile profile1 -latencyThresholdfactor 20

unset ica latencyprofile

Use this command to remove ica latencyprofile settings.Refer to the set ica latencyprofile command for meanings of the arguments.

Synopsys

unset ica latencyprofile <name> [-l7LatencyMonitoring] [-l7LatencyThresholdFactor] [-l7LatencyWaitTime] [-l7LatencyNotifyInterval] [-l7LatencyMaxNotifyCount]

show ica latencyprofile

Displays details of the specified ica l7latencyprofile. If no l7latencyprofile is specified, displays a list of ica l7latencyprofiles on the NetScaler appliance.

Synopsys

show ica latencyprofile [<name>]

Arguments

name

Name of the ica l7latencyprofile.

Outputs

stateflag

l7LatencyMonitoring

Enable/Disable L7 Latency monitoring for L7 latency notifications

l7LatencyThresholdFactor

L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported

l7LatencyWaitTime

L7 Latency Wait time. This is the time for which the Netscaler waits after the threshold is exceeded before it sends out a Notification to the Insight Center.

l7LatencyNotifyInterval

L7 Latency Notify Interval. This is the interval at which the Netscaler sends out notifications to the Insight Center after the wait time has passed.

l7LatencyMaxNotifyCount

L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold.

refCnt

Number of entities using this l7latencyprofile

builtin

Indicates that the ICA latencyprofile is a built-in (SYSTEM INTERNAL) type.

isDefault

A value of true is returned if it is a default l7latencyprofile

devno

count

Example

sh ica l7latencyprofile profile1