Product Documentation

lsn client

Sep 12, 2016

The following operations can be performed on "lsn client":

add | bind | unbind | show | rm

add lsn client

Add LSN Client.

Synopsys

add lsn client <clientname>

Arguments

clientname

Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Example

add lsn client client1

bind lsn client

Bind LSN Client with client network or host. There can be a maximum of 1 million LSN subscribers globally.

Synopsys

bind lsn client <clientname> ((-network <ip_addr> [-netmask <netmask>] [-td <positive_integer>]) | -aclname <string> | -network6 <ipv6_addr|*> | -acl6name <string>)

Arguments

clientname

Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

network

IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

Default value: 0xFFFFFFFF

aclname

Name(s) of any configured extended ACL(s) whose action is ALLOW.

The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the NetScaler ADC is to perform large scale NAT.

acl6name

Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6

IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

td

ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs.

If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain.

Default value: 0

Minimum value: 0

Maximum value: 4094

Example

bind  lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0

unbind lsn client

Unbind LSN Client with client network or host.

Synopsys

unbind lsn client <clientname> ((-network <ip_addr> [-netmask <netmask>] [-td <positive_integer>]) | -aclname <string> | -network6 <ipv6_addr|*> | -acl6name <string>)

Arguments

clientname

Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

network

IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

Default value: 0xFFFFFFFF

aclname

Name(s) of any configured extended ACL(s) whose action is ALLOW.

The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the NetScaler ADC is to perform large scale NAT.

acl6name

Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6

IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

td

ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs.

If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain.

Default value: 0

Minimum value: 0

Maximum value: 4094

Example

unbind  lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0 

show lsn client

Display LSN Client.

Synopsys

show lsn client [<clientname>]

Arguments

clientname

Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Outputs

network

IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

td

ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs.

If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain.

aclname

Name(s) of any configured extended ACL(s) whose action is ALLOW.

The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the NetScaler ADC is to perform large scale NAT.

acl6name

Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6

IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the NetScaler ADC to perform Large Scale NAT.

devno

count

stateflag

Example

show lsn client client1

rm lsn client

Remove LSN Client.

Synopsys

rm lsn client <clientname>

Arguments

clientname

Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Example

rm lsn client client1