Product Documentation

bridgetable

Sep 12, 2016

The following operations can be performed on "bridgetable":

set bridgetable

Sets global parameters of bridge table entries.

Synopsys

set bridgetable -bridgeAge <positive_integer>

Arguments

bridgeAge

Time-out value for the bridge table entries, in seconds. The new value applies only to the entries that are dynamically learned after the new value is set. Previously existing bridge table entries expire after the previously configured time-out value.

Default value: 300

Minimum value: 60

Maximum value: 300

Example

set bridgetable -bridgeAge 200

unset bridgetable

Use this command to remove bridgetable settings.Refer to the set bridgetable command for meanings of the arguments.

Synopsys

unset bridgetable -bridgeAge

show bridgetable

Displays the bridge table entries and the configured time-out values for these entries.

Synopsys

show bridgetable

Outputs

bridgeAge

Time-out value for the bridge table entries, in seconds. The new value applies only to the entries that are dynamically learned after the new value is set. Previously existing bridge table entries expire after the previously configured time-out value.

mac

The MAC address of the target.

ifnum

The interface on which the address was learned.

vlan

The VLAN in which this MAC address resides.

vxlan

The VXLAN in which this MAC address resides.

vtep

The IP address of the VTEP

flags

Display flags,

channel

The Tunnel through which bridge entry is learned.

devno

count

stateflag

Example

show bridgetable

clear bridgetable

Remove entries from bridge table

Synopsys

clear bridgetable [-vlan <positive_integer> | -vxlan <positive_integer>] [-ifnum <interface_name>]

Arguments

vlan

VLAN whose entries are to be removed.

Minimum value: 1

Maximum value: 4094

ifnum

INTERFACE whose entries are to be removed.

vxlan

VXLAN whose entries are to be removed.

Minimum value: 1

Maximum value: 16777215