Product Documentation

nat64param

Sep 12, 2016

The following operations can be performed on "nat64param":

set nat64param

Set the nat64 parameter

Synopsys

set nat64param [-td <positive_integer>] [-nat64IgnoreTOS ( YES | NO )] [-nat64ZeroCheckSum ( ENABLED | DISABLED )] [-nat64v6Mtu <positive_integer>] [-nat64FragHeader ( ENABLED | DISABLED )]

Arguments

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

nat64IgnoreTOS

Ignore TOS.

Possible values: YES, NO

Default value: NO

nat64ZeroCheckSum

Calculate checksum for UDP packets with zero checksum

Possible values: ENABLED, DISABLED

Default value: ENABLED

nat64v6Mtu

MTU setting for the IPv6 side. If the incoming IPv4 packet greater than this, either fragment or send icmp need fragmentation error.

Default value: 1280

Minimum value: 1280

Maximum value: 9216

nat64FragHeader

When disabled, translator will not insert IPv6 fragmentation header for non fragmented IPv4 packets

Possible values: ENABLED, DISABLED

Default value: ENABLED

Example

set nat64param -nat64ignoretos YES

unset nat64param

Use this command to remove nat64param settings.Refer to the set nat64param command for meanings of the arguments.

Synopsys

unset nat64param [-td <positive_integer>] [-nat64IgnoreTOS] [-nat64ZeroCheckSum] [-nat64v6Mtu] [-nat64FragHeader]

show nat64param

Show the nat64 parameters.

Synopsys

show nat64param [-td <positive_integer>]

Arguments

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

Outputs

nat64IgnoreTOS

Ignore TOS.

nat64ZeroCheckSum

Calculate checksum for UDP packets with zero checksum

nat64v6Mtu

MTU setting for the IPv6 side. If the incoming IPv4 packet greater than this, either fragment or send icmp need fragmentation error.

nat64FragHeader

When disabled, translator will not insert IPv6 fragmentation header for non fragmented IPv4 packets

devno

count

stateflag

Example

show nat64param