Product Documentation

nd6

Sep 12, 2016

The following operations can be performed on "nd6":

add | clear | rm | show

add nd6

Adds a static entry to the ND6 table of the NetScaler appliance.

Synopsys

add nd6 <neighbor> <mac> (<ifnum> | (-vxlan <positive_integer> -vtep <ip_addr>)) [-vlan <integer>] [-td <positive_integer>]

Arguments

neighbor

Link-local IPv6 address of the adjacent network device to add to the ND6 table.

mac

MAC address of the adjacent network device.

ifnum

Interface through which the adjacent network device is available, specified in slot/port notation (for example, 1/3). Use spaces to separate multiple entries.

vlan

Integer value that uniquely identifies the VLAN on which the adjacent network device exists.

Minimum value: 1

Maximum value: 4094

vxlan

ID of the VXLAN on which the IPv6 address of this ND6 entry is reachable.

Minimum value: 1

Maximum value: 16777215

vtep

IP address of the VXLAN tunnel endpoint (VTEP) through which the IPv6 address of this ND6 entry is reachable.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

Example

add nd6 2001::1 00:04:23:be:3c:06 5 1/1

clear nd6

Removes all IPv6 neighbour discovery entries from the NetScaler appliance.

Synopsys

clear nd6

rm nd6

Remove a static IPv6 neighbor discovery entry from the NetScaler appliance's ND6 table.

Synopsys

rm nd6 <neighbor> [-vlan <integer> | -vxlan <positive_integer>] [-td <positive_integer>]

Arguments

neighbor

Link-local IPv6 address of the adjacent network device that you want to remove from the ND6 table.

vlan

Integer value that uniquely identifies the VLAN for the ND6 entry you want to remove.

Minimum value: 1

Maximum value: 4094

vxlan

Integer value that uniquely identifies the VXLAN for the ND6 entry you want to remove.

Minimum value: 1

Maximum value: 16777215

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

Example

rm nd6 2001::1 5 1/1

show nd6

Display the neighbor discovery information.

Synopsys

show nd6 [<neighbor> [-td <positive_integer>]]

Arguments

neighbor

Link-local IPv6 address of the adjacent network device to add to the ND6 table.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

Outputs

mac

MAC address of the adjacent network device.

state

ND6 state

timeout

Time elapsed

ifnum

Interface through which the adjacent network device is available, specified in slot/port notation (for example, 1/3). Use spaces to separate multiple entries.

vlan

Integer value that uniquely identifies the VLAN on which the adjacent network device exists.

vxlan

ID of the VXLAN on which the IPv6 address of this ND6 entry is reachable.

vtep

IP address of the VXLAN tunnel endpoint (VTEP) through which the IPv6 address of this ND6 entry is reachable.

flags

flag for static/permanent entry.

channel

The tunnel that is bound to a netbridge.

devno

count

stateflag

Example

Following is an example of the output for the show nd6 command:   Neighbor           MAC-Address(Vlan, Interface)      State      TIME(hh:mm:ss)  --------           ---------------------------       -----      --------------  2001::1            00:04:23:be:3c:06(5, 1/1)         REACHABLE  00:00:24  FE80::123:1        00:04:23:be:3c:07(4, 1/2)         STALE      00:03:34