Product Documentation

vrID6

Sep 12, 2016

The following operations can be performed on "vrID6":

add | rm | set | unset | bind | unbind | show

add vrID6

Adds a VMAC6 address to the NetScaler appliance. A Virtual MAC address (VMAC6) is a floating entity, shared by the nodes in an HA configuration.

Synopsys

add vrID6 <id> [-priority <positive_integer>] [-preemption ( ENABLED | DISABLED )] [-sharing ( ENABLED | DISABLED )] [-preemptiondelaytimer <secs>] [-trackifNumPriority <positive_integer>]

Arguments

id

Integer value that uniquely identifies a VMAC6 address.

Minimum value: 1

Maximum value: 255

priority

Base priority (BP), in an active-active mode configuration, which ordinarily determines the master VIP address.

Default value: 255

Minimum value: 0

Maximum value: 255

preemption

In an active-active mode configuration, make a backup VIP address the master if its priority becomes higher than that of a master VIP address bound to this VMAC address.

If you disable pre-emption while a backup VIP address is the master, the backup VIP address remains master until the original master VIP's priority becomes higher than that of the current master.

Possible values: ENABLED, DISABLED

Default value: ENABLED

sharing

In an active-active mode configuration, enable the backup VIP address to process any traffic instead of dropping it.

Possible values: ENABLED, DISABLED

Default value: DISABLED

preemptiondelaytimer

Preemption delay time in seconds. If any high priority node will come in network, it will wait for these many seconds before becoming master.

Default value: 0

Minimum value: 1

Maximum value: 36000

trackifNumPriority

Priority by which the Effective priority will be reduced if any of the tracked interfaces goes down.

Default value: 0

Minimum value: 1

Maximum value: 255

Example

add vrID6 1

rm vrID6

Removes a specified VMAC6 entry or all VMAC6 entries from the NetScaler appliance.

Synopsys

rm vrID6 (<id> | -all)

Arguments

id

Integer value that uniquely identifies a VMAC6 address.

Minimum value: 1

Maximum value: 255

all

Remove all configured VMAC6 addresses from the NetScaler appliance.

set vrID6

Modifies parameters related to a VMAC address on the NetScaler appliance.

Synopsys

set vrID6 <id> [-priority <positive_integer>] [-preemption ( ENABLED | DISABLED )] [-sharing ( ENABLED | DISABLED )] [-preemptiondelaytimer <secs>] [-trackifNumPriority <positive_integer>]

Arguments

id

Integer value that uniquely identifies the VMAC address. The generic VMACaddress is in the form of 00:00:5e:00:01:<VRID>. For example, if you add a VRID with a value of 60 and bind it to an interface, the resulting VMAC address is 00:00:5e:00:01:3c, where 3c is the hexadecimal representation of 60.

Minimum value: 1

Maximum value: 255

priority

Base priority (BP), in an active-active mode configuration, which ordinarily determines the master VIP address.

Default value: 255

Minimum value: 0

Maximum value: 255

preemption

In an active-active mode configuration, make a backup VIP address the master if its priority becomes higher than that of a master VIP address bound to this VMAC address.

If you disable pre-emption while a backup VIP address is the master, the backup VIP address remains master until the original master VIP's priority becomes higher than that of the current master.

Possible values: ENABLED, DISABLED

Default value: ENABLED

sharing

In an active-active mode configuration, enable the backup VIP address to process any traffic instead of dropping it.

Possible values: ENABLED, DISABLED

Default value: DISABLED

preemptiondelaytimer

Preemption delay time in seconds. If any high priority node will come in network, it will wait for these many seconds before becoming master.

Default value: 0

Minimum value: 1

Maximum value: 36000

trackifNumPriority

Priority by which the Effective priority will be reduced if any of the tracked interfaces goes down.

Default value: 0

Minimum value: 1

Maximum value: 255

Example

set vrID6 1 -priority 100

unset vrID6

Use this command to remove vrID6 settings.Refer to the set vrID6 command for meanings of the arguments.

Synopsys

unset vrID6 <id> [-priority] [-preemption] [-sharing] [-preemptiondelaytimer] [-trackifNumPriority]

bind vrID6

Binds the specified interfaces to a VMAC6 configuration.

Synopsys

bind vrID6 <id> (-ifnum <interface_name> ... | -trackifNum <interface_name> ...)

Arguments

id

Integer value that uniquely identifies a VMAC6 address.

Minimum value: 1

Maximum value: 255

ifnum

Interfaces to bind tothe VMAC6, specified in (slot/port) notation (for example, 1/2).Use spaces to separate multiple entries.

trackifNum

Interfaces which need to be tracked for this vrID.

Example

add vrID6 1

unbind vrID6

Unbinds the specified interfaces from a VMAC6 configuration.

Synopsys

unbind vrID6 <id> (-ifnum <interface_name> ... | -trackifNum <interface_name> ...)

Arguments

id

Integer value that uniquely identifies a VMAC6 address.

Minimum value: 1

Maximum value: 255

ifnum

Interfaces to unbind from the VMAC6, specified in (slot/port) notation (for example, 1/2). Use spaces to separate multiple entries.

trackifNum

Interfaces which need to be tracked for this vrID.

show vrID6

Displays the settings of all VRID6s configured on the NetScaler appliance, or of the specified VRID6. To display the settings of all the VRID6s, run the command without any parameters. To display the settings of a particular VRID6, specify the VRID6.

Synopsys

show vrID6 [<id>]

Arguments

id

Integer value that uniquely identifies a VMAC6 address.

Minimum value: 1

Maximum value: 255

Outputs

ifaces

Interfaces bound to this VRID.

ifnum

Interfaces bound to this VRID.

type

Type (static or dynamic) of this VRID.

vlan

The VLAN in which this VRID resides.

priority

Base priority (BP), in an active-active mode configuration, which ordinarily determines the master VIP address.

state

State of this VRID.

flags

Flags.

stateflag

IPAddress

The IP address bound to the VRID6

preemption

In an active-active mode configuration, make a backup VIP address the master if its priority becomes higher than that of a master VIP address bound to this VMAC address.

If you disable pre-emption while a backup VIP address is the master, the backup VIP address remains master until the original master VIP's priority becomes higher than that of the current master.

sharing

In an active-active mode configuration, enable the backup VIP address to process any traffic instead of dropping it.

preemptiondelaytimer

Preemption delay time in seconds. If any high priority node will come in network, it will wait for these many seconds before becoming master.

trackifNum

Interfaces which need to be tracked for this vrID.

trackifNumPriority

Priority by which the Effective priority will be reduced if any of the tracked interfaces goes down.

effectivePriority

The effective priority of this VRID.

devno

count

Example

show vrid6