Product Documentation

ns dhcpParams

Sep 12, 2016

The following operations can be performed on "ns dhcpParams":

set ns dhcpParams

Sets the DHCP client parameters.

Synopsys

set ns dhcpParams [-dhcpClient ( ON | OFF )] [-saveroute ( ON | OFF )]

Arguments

dhcpClient

Enables DHCP client to acquire IP address from the DHCP server in the next boot. When set to OFF, disables the DHCP client in the next boot.

Possible values: ON, OFF

Default value: OFF

saveroute

DHCP acquired routes are saved on the NetScaler appliance.

Possible values: ON, OFF

Default value: OFF

unset ns dhcpParams

Use this command to remove ns dhcpParams settings.Refer to the set ns dhcpParams command for meanings of the arguments.

Synopsys

unset ns dhcpParams [-dhcpClient] [-saveroute]

show ns dhcpParams

Displays the parameters configured for the DHCP client.

Synopsys

show ns dhcpParams

Outputs

dhcpClient

ON, if DHCP client active on next reboot, else OFF

IPAddress

DHCP acquired IP

netmask

DHCP acquired Netmask

hostRtGw

DHCP acquired Gateway

running

DHCP mode

saveroute

DHCP acquired gateway save flag