Product Documentation

callhome

Sep 12, 2016

The following operations can be performed on "callhome":

show callhome

Displays the CallHome configuration and trigger event details.

Synopsys

show callhome

Outputs

emailAddress

Email address of the contact administrator.

proxyMode

Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.

IPAddress

IP address of the proxy server.

port

HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration.

proxyAuthService

Name of the service that represents the proxy server.

sslcardfirstfailure

First occurrence SSL card failure.

sslcardlatestfailure

Latest occurrence SSL card failure.

powfirstfail

First occurrence power supply unit failure.

powlatestfailure

Latest occurrence power supply unit failure.

HDDfirstfail

First occurrence hard disk drive failure.

HDDlatestfailure

Latest occurrence hard disk drive failure.

FLASHfirstfail

First occurrence compact flash failure.

FLASHlatestfailure

Latest occurrence compact flush failure.

restartLatestfail

Latest occurrence warm restart failure.

callhomestatus

Callhome feature enabled/disable, register with upload server successful/failed

Example

 show callhome  E-mail address configured:xxx@yahoo.com  Trigger event              State    First occurrence              Latest occurrence  -------------                -----    ----------------              ----------------- 1) Compact flash errors      Enabled  ..       .. 2) Hard disk drive errors  Enabled  ..       .. 3) Power supply unit failure Enabled  27 Aug 2010 18:22:47       28 Aug 2010 18:22:47        4) SSL card failure          Enabled  25 Aug 2010 18:22:47       26 Aug 2010 18:22:47        5) Warm restart        Enabled  N/A        ..                                      

set callhome

Sets CallHome parameters

Synopsys

set callhome [-emailAddress <string>] [-proxyMode ( YES | NO )] [-IPAddress <ip_addr|ipv6_addr|*> | -proxyAuthService <string>] [-port <port|*>]

Arguments

emailAddress

Email address of the contact administrator.

proxyMode

Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.

Possible values: YES, NO

Default value: NO

IPAddress

IP address of the proxy server.

proxyAuthService

Name of the service that represents the proxy server.

port

HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration.

Minimum value: 1

Example

set callhome -emailAddress abc@xyz.com -proxyMode YES -proxyauthService callhome_proxy -port 80

unset callhome

Use this command to remove callhome settings.Refer to the set callhome command for meanings of the arguments.

Synopsys

unset callhome [-emailAddress] [-proxyMode] [-IPAddress] [-proxyAuthService] [-port]