附录
带有输出的示例命令：
运行脚本
root@ns# pwd
/var/safenet/config
root@ns# sh safenet_config
<!--NeedCopy-->
创建证书
root@ns# cd /var/safenet/safenet/lunaclient/bin
root@ns# ./vtl createcert -n 10.102.59.175
Private Key created and written to: /var/safenet/safenet/lunaclient/cert/client/10.102.59.175Key.pem
Certificate created and written to: /var/safenet/safenet/lunaclient/cert/client/10.102.59.175.pem
<!--NeedCopy-->
将证书复制到 HSM
root@ns# scp /var/safenet/safenet/lunaclient/cert/client/10.102.59.175.pem admin@10.217.2.7:
admin@10.217.2.7's password:
10.102.59.175.pem 100% 818 0.8KB/s 00:00
<!--NeedCopy-->
将证书和密钥从 HSM 复制到 Citrix ADC 设备
root@ns# scp admin@10.217.2.7:server.pem /var/Thales Luna/safenet/lunaclient/server.2.7.pem
admin@10.217.2.7's password:
server.pem 100% 1164 1.1KB/s 00:01
<!--NeedCopy-->
使用 SSH 连接到泰雷兹 Luna HSM
ssh admin@10.217.2.7
Connecting to 10.217.2.7:22...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.
Last login: Thu Jun 23 02:20:29 2016 from 10.252.243.11
Luna SA 5.2.3-1 Command Line Shell - Copyright (c) 2001-2014 SafeNet, Inc. All rights reserved.
[Safenet1] lunash:>hsm login
Please enter the HSM Administrators' password:
> *******
'hsm login' successful.
Command Result : 0 (Success)
[Safenet1] lunash:>
<!--NeedCopy-->
在泰雷兹 Luna HSM 上注册 Citrix ADC
[Safenet1] lunash:>client register -client ns175 -ip 10.102.59.175
'client register' successful.
Command Result : 0 (Success)
[Safenet1] lunash:>
<!--NeedCopy-->
从分区列表中为客户端分配一个分区
[Safenet1] lunash:>client assignPartition -client ns175 -partition p2
'client assignPartition' successful.
Command Result : 0 (Success)
[Safenet1] lunash:>
<!--NeedCopy-->
在 Citrix ADC 上使用其证书注册 HSM
root@ns# ./vtl addserver -n 10.217.2.7 -c /var/safenet/safenet/lunaclient/server.2.7.pem
New server 10.217.2.7 successfully added to server list.
<!--NeedCopy-->
验证 ADC 和 HSM 之间的网络信任链路 (NTL) 连接
root@ns# ./vtl verify
The following Luna SA Slots/Partitions were found:
Slot Serial # Label
==== ================ =====
0 477877010 p2
<!--NeedCopy-->
保存配置
root@ns# cp /etc/Chrystoki.conf /var/safenet/config/
<!--NeedCopy-->
在引导时配置 Gateway 关守护进程的自动启动
touch /var/safenet/safenet_is_enrolled
<!--NeedCopy-->
已复制!
失败!