This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
小心和警告
电气安全预防措施
在安装或维护过程中,请佩戴接地腕带,以避免 ESD 损坏电器的电子设备。请使用连接到良好地面或设备的导电腕带。可以将其连接到背面 ESD 符号旁边的连接器。
请遵循基本的用电安全预防措施,以保护自己免受伤害,设备免于损坏。
- 请谨记电源紧急关闭 (EPO) 开关的位置,如果出现用电事故,您可以快速切断设备的电源。
- 请勿将用于降低静电放电的地垫用作预防电击的保护措施。请使用专门用作电气绝缘体的橡胶垫。
- 请确保电源线带有接地插头,并插入接地电源插座中。
- 请确保电源可以应对设备的最大功率消耗级别,不会出现过载危险。
- 必须始终保持地面安全。因此,机架应该接地。请特别关注电源连接而非分支线路的直接连接(例如,与移动式插座的连接)。
警告
- 静电放电(ESD)可能会损坏您的设备。
- 不要在设备上放置任何物体。
- 不要盖住设备侧面的通风孔。
- 电器的金属表面可能会被加热。
- 触摸设备的金属表面时要小心。
机架注意事项
- 确保机架底部的调平用千斤顶完全接触地面,使机架的全部重量位于其上。
- 对于单个机架安装,请向机架连接稳定器。
- 对于多个机架安装,请将这些机架绑定(连接)在一起。
- 始终在确保机架处于稳定状态之后,再从机架延伸组件。
- 每次仅延伸一个组件。同时延伸两个或多个组件可能会导致机架不稳定。
- 设备前面板左右两侧的把手仅可用于从机架延伸此设备。请勿使用这些把手将设备安装到机架上。请改用下文介绍的机架导轨硬件。
共享
共享
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.