This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
安装设备
在机架上安装设备
SD-WAN 210-SE/210-SE LTE 设备的机架式机箱适合标准机架,具有 1U 的机架高度。
210-SE/210-SE LTE 设备可以放置在任何平坦表面上,也可以使用随附的机架安装支架和螺丝安装在任何标准机架单元中。
要将设备安装到机架中:
- 在机架安装之前,确保 SD-WAN 210-SE/210-SE LTE 设备放置在稳定的表面上。
- 使用提供的支架螺钉将提供的机架安装支架固定到设备的侧面。
- 如果要将设备安装到四柱机架中,请将手柄与 SD-WAN 210-SE/ 210-SE LTE 设备前部对齐的机架安装支架连接起来。
- 如果要将设备安装到双柱机架中,请将手柄与 SD-WAN 210-210-SE LTE 设备中间对齐的机架安装支架连接起来。
- 将 SD-WAN 210-SE/SD-WAN 210-SE LTE 设备放在机架中。确保设备周围有足够的空间以允许充足的空气流动。
- 将机架安装支架孔与机架上的孔对齐,确保 SD-WAN 210-SE/210-SE LTE 设备处于水平状态。
- 手指拧紧四个机架安装螺钉以将设备连接到机架上。
- 用适当的螺丝刀拧紧机架安装螺钉。
- 插上提供的电源线。
在机架上用天线安装设备
将设备安装在墙上
要将设备安装到墙上:
- 使用随附的石膏板螺丝和锚固,在墙上钻 2 个孔,并将设备安装外壳背面的两个匹配螺钉孔排列在墙上。用 4 个(每侧 2 个)螺丝悬挂设备。
- 将机箱耳架与所提供的安装孔的前面和背面对齐,然后通过拧紧提供的 4 个螺钉(每侧 2)将耳朵支架正确地连接到 SD-WAN 机箱。
- 使用下图两侧的 4 个耳架(每侧 2 个)安装 SD-WAN 210-SE LTE 机箱。
在墙壁上用天线安装设备
在桌面上安装设备
SD-WAN 210-SE/210-SE LTE 设备可以使用设备包装中的橡胶脚进行桌面安装。
共享
共享
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.