This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
配置路由器
设备自动协商 WCCP-GRE 或 WCCP-L2。主要选择是 单播操作 (其中设备配置了每个路由器的 IP 地址)或 多播操作 (其中设备和路由器都配置了多播地址)。
正常(单播)操作— 对于正常操作,过程是声明 WCCP 版本 2 和路由器的 WCCP 组 ID 作为一个整体,然后在每个 WAN 接口上启用重定向。以下是思科 IOS 示例:
``` pre codeblock config term ip wccp version 2 ! We will configure the appliance to use group 51 for TCP and 52 for UDP. ip wccp 51 ip wccp 52
! Repeat the following three lines for each WAN interface ! you wish to accelerate: interface your_wan_interface ! If Reverse Path Forwarding is enabled (with an ip verify unicast ! source reachable” statement), delete or comment out the statement: ! ip verify unicast source reachable-via any ! Repeat on all ports.
ip wccp 51 redirect out ip wccp 51 redirect in ip wccp 52 redirect out ip wccp 52 redirect in
! If the appliance is inline with one of the router interfaces ! (NOT SUPPORTED), add the following line for that interface ! to prevent loops: ip wccp redirect exclude in ^Z
如果多个路由器要使用同一个设备,则每个路由器的配置如上所示,使用相同的服务组或不同的服务组。
**多播操作**— 为设备和每个路由器提供多播地址时,配置与正常操作略有不同。以下是思科 IOS 示例:
``` pre codeblock
config term
ip wccp version 2
ip wccp 51 group-address 225.0.0.1
! Repeat the following three lines for each WAN interface
! you wish to accelerate:
interface your_wan_interface
! If Reverse Path Forwarding is enabled (with an ip verify unicast
! source reachable” statement), delete or comment out the statement:
! ip verify unicast source reachable-via any
ip wccp 51 redirect out
ip wccp 51 redirect in
!
! The following line is needed only on the interface facing the other router,
! if there is another router participating in this service group.
ip wccp 51 group-listen
!If the appliance is inline with one of the router interfaces,
!(which is supported but not recommended), add
!the following line for that interface to prevent loops:
ip wccp redirect exclude in
^Z
<!--NeedCopy-->
共享
共享
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.