Product Documentation

WCCP Configuration

Sep 07, 2012

show wccp

Syntax: show wccp
[-id “id”]

Displays the current settings for all WCCP service groups, or optionally only for the service group specified with -id.

enable wccp

Syntax: enable wccp

Global WCCP enable. Not effective unless acceleration is enabled and at least one WCCP service group is defined.

disable wccp

Syntax: disable wccp

Global WCCP disable.

add wccp

Adds a new WCCP service-group definition. The parameters are the same as those on the WCCP Configuration page on the Web UI.

Syntax: add wccp
-id “id” 
[-accelerated-pair {apa, apb}] 
-router-communication unicast 
-address “addr1[,...,addrN]” 
[-router-assignment {hash, mask, auto}] 
[-router-forwarding {auto, gre, level-2}] 
[-state {enable, disable}] 
[-priority “number”] 
[-protocol {tcp, udp}]
Syntax: add wccp
-id “id” 
[-accelerated-pair {apa, apb}] 
-router-communication multicast 
-address “addr” 
[-router-assignment {hash, mask, auto}] 
[-router-forwarding {auto, gre, level-2}] 
[-router-return {auto, gre, level-2}] 
[-time-to-live “number”] 
[-state {enable, disable}] 
[-priority “number”] 
[-protocol {tcp, udp}]
Default values for the optional parameters are as follows:
-accelerated-pair = apa 
-router-assignment = hash 
-router-forwarding = auto 
-router-return = auto 
-time-to-live = 1 
-state = enable 
-priority = 0 
-protocol = tcp

set wccp

Syntax: set wccp
-id “id” 
[-accelerated-pair {apa, apb}] 
[ 
-router-communication unicast 
-address “addr1[,...,addrN]” 
] 
[-router-assignment {hash, mask, auto}] 
[-router-forwarding {auto, gre, level-2}] 
[-state {enable, disable}] 
[-priority “number”] 
[-protocol {tcp, udp}]
Syntax: set wccp
-id “id” 
[-accelerated-pair {apa, apb}] 
[ 
-router-communication multicast 
-address “addr” 
] 
[-router-assignment {hash, mask, auto}] 
[-router-forwarding {auto, gre, level-2}] 
[-router-return {auto, gre, level-2}] 
[-time-to-live “number”] 
[-state {enable, disable}] 
[-priority “number”] 
[-protocol {tcp, udp}]

Alters an existing WCCP service-group definition. The parameters are the same as those on the WCCP Configuration page on the Web UI.

remove wccp

Syntax: remove wccp
{-all , -id “num”}

Deletes all WCCP service groups or (with -id) only the specified service group number.