- Citrix NetScaler MPX 5500
- Citrix NetScaler MPX 5550 and MPX 5650
- Citrix NetScaler MPX 7500 and MPX 9500
- Citrix NetScaler MPX 8005, MPX 8015, MPX 8200, MPX 8400, MPX 8600, and MPX 8800
- Citrix NetScaler MPX 9700, MPX 10500, MPX 12500, and MPX 15500
- Citrix NetScaler MPX 11500, MPX 13500, MPX 14500, MPX 16500, MPX 18500, and MPX 20500
- Citrix NetScaler MPX 11515, MPX 11520, MPX 11530, MPX 11540, and MPX 11542
- Citrix NetScaler MPX 14000
- Citrix NetScaler MPX 15000
- Citrix NetScaler MPX 17000
- Citrix NetScaler MPX 17500, MPX 19500, and MPX 21500
- Citrix NetScaler MPX 17550, MPX 19550, MPX 20550, and MPX 21550
- Citrix NetScaler MPX 22040, MPX 22060, MPX 22080, MPX 22100, and MPX 22120
- Citrix NetScaler MPX 24100 and MPX 24150
- Citrix NetScaler MPX 25100T and MPX 25160T
- Citrix NetScaler MPX 14020, MPX 14030, MPX 14040, MPX 14060, MPX 14080, and MPX 14100
- Application Firewall Platforms
Citrix NetScaler MPX 14000
May 02, 2014
The Citrix NetScaler models MPX 14000 is a 1U appliance, with one 8-core processor and 32 gigabytes (GB) of memory.
The following figure shows the front panel of the MPX 14000 appliance.
Figure 1. Citrix NetScaler MPX 14000, front panel
The MPX 14000 appliance has the following ports:
- RS232 serial console port.
- Two USB ports.
- Two 10/100/1000Base-T copper Ethernet management ports (RJ45), numbered 0/1 and 0/2. The management ports are used to connect directly to the appliance for system administration functions.
- Eight 10G SFP+ ports numbered 10/1, 10/2, 10/3, 10/4, 10/5, 10/6, 10/7, and 10/8.
The following figure shows the back panel of the MPX 14000 appliance.
Figure 2. Citrix NetScaler MPX 14000, back panel
The following components are visible on the back panel of the MPX 14000 appliance:
- 256 GB removable solid-state drive, which is used to store the NetScaler software and the user data.
- Power switch, which turns off power to the appliance, just as if you were to unplug the power supply. Press the switch for five seconds to turn off the power.
- Disable alarm button, which is nonfunctional. This button is functional only if you install a second power supply.
Press this button to stop the power alarm from sounding when you have plugged the appliance into only one power outlet or when one power supply is malfunctioning and you want to continue operating the appliance until it is repaired.
- Dual power supplies, rated at 450 watts, 110-220 volts.
For information about installing the rails, rack mounting the hardware, and connecting the cables, see "Installing the Hardware."
For information about performing initial configuration of your appliance, see "Initial Configuration."