Product Documentation

Citrix ADC SDX 14020, SDX 14030, SDX 14040, SDX 14060, SDX 14080 and SDX 14100

The Citrix ADC SDX 14020/14030/14040/14060/14080/14100 are 2U appliances. Each model has two 6-core processors and 64 gigabytes (GB) of memory and sixteen 10G SFP+ ports (16x10G SFP+).

Note

 For information about Citrix ADC SDX hardware and component compatibility matrix, see Citrix ADC SDX Hardware-Software Compatibility Matrix.

The following figure shows the front panel of the SDX 14020/14030/14040/14060/14080/ 14100 ( 16x10G SFP+) appliance.

Figure 1. Citrix ADC SDX 14020/14030/14040/14060/14080/14100 ( 16x10G SFP+), front panel

localized image

The Citrix ADC SDX 14020/14030/14040/14060/14080/14100 appliances have the following ports:

  • RS232 serial Console Port.
  • 10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this port to remotely monitor and manage the appliance independently of the Citrix ADC software.
  • Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1 and 0/2 from left to right. These ports are used to connect directly to the appliance for system administration functions.
  • Network Ports, sixteen 10G SFP+ ports ( 16x10G SFP+).

Note

The 10G SFP+ ports on these appliances support copper 1G SFP transceivers.

The following figure shows the back panel of the SDX 14020/14030/14040/14060/14080/ 14100  appliance.

Figure 2. Citrix ADC SDX 14020/14030/14040/14060/14080/14100, back panel

localized image

The following components are visible on the back panel of the SDX 14020/14030/14040/14060/14080/14100 appliance:

  • Two 240 GB removable solid-state drives (SSDs). The two leftmost solid-state drives store the Citrix ADC software. The next two solid-state drives, of 300 GB each, store user data. The remaining four solid-state drives are reserved for future use. The Citrix ADC SDX 14040 appliance has six 300 GB SSDs and Citrix ADC SDX 14060/14080/14100 appliances have eight 300 GB SSDs. These appliances are redundant array of independent disks (RAID) devices. For more information, see Managing RAID Disk Allocation on 22XXX Series SDX Appliances.

  • Power switch which turns power to the appliance on or off. Press the switch for less than two seconds to turn off the power.
  • Two power supplies. each rated at 1000 watts, 100-240 volts. Each power supply has an LED that indicates the status of the power supply, as described in Common Hardware Components.
  • Disable alarm button. which is functional only when the appliance has two powersupplies. Press this button to stop the power alarm from sounding when you have plugged the appliance into only one power outlet, or when one power supply is malfunctioning and you want to continue operating the appliance until it is repaired.
  • Non-maskable interrupt (NMI) Button. used at the request of Technical Support to initiate a core dump. To press this red button, which is recessed to prevent unintentional activation, use a pen, pencil, or other pointed object. The NMI Button is also available remotely over the network in the LOM GUI, in the Remote Control menu. For more information about the lights out management port of the appliance, see Lights Out Management Port of the Citrix ADC SDX Appliance.

Note

If you buy an instance license pack for SDX 14xxx that includes additional SSDs, read CTX215581 and complete the steps for adding a logical drive before trying to use the additional instance licenses.

Citrix ADC SDX 14020, SDX 14030, SDX 14040, SDX 14060, SDX 14080 and SDX 14100

In this article