Web and web service applications that are exposed to the Internet have become increasingly vulnerable to attacks. To protect applications from attack, you need visibility into the nature and extent of past, present, and impending threats, real-time actionable data on attacks, and recommendations on countermeasures. Security Insight provides a single-pane solution to help you assess your application security status and take corrective actions to secure your applications.
Security Insight is supported on NetScaler MAS with NetScaler appliances running on version 11.0 Build 65.31 and later.
This document includes the following information:
Security Insight is an intuitive dashboard-based security analytics solution that gives you full visibility into the threat environment associated with your applications. Security insight is included in NetScaler MAS, and it periodically generates reports based on your Application Firewall and NetScaler system security configurations. The reports include the following information for each application:
Security Insight is supported on NetScaler instances with NetScaler Platinum license or NetScaler Enterprise with AppFirewall license only.
To configure security insight on a NetScaler instance, first configure an application firewall profile and an application firewall policy, and then bind the application firewall policy globally.
Then, enable the AppFlow feature, configure an AppFlow collector, action, and policy, and bind the policy globally. When you configure the collector, you must specify the IP address of the NetScaler MAS server on which you want to monitor the reports.
To configure security insight on a NetScaler instance
1. Run the following commands to configure an application firewall profile and policy, and bind the application firewall policy globally or to the load balancing virtual server.
add appfw profile <name> [-defaults ( basic | advanced )]
set appfw profile <name> [-startURLAction <startURLAction> ...]
add appfw policy <name> <rule> <profileName>
bind appfw global <policyName> <priority>
bind lb vserver <lb vserver> -policyName <policy> -priority <priority>
add appfw profile pr_appfw -defaults advanced
set appfw profile pr_appfw -startURLaction log stats learn
add appfw policy pr_appfw_pol "HTTP.REQ.HEADER(\"Host\").EXISTS" pr_appfw
bind appfw global pr_appfw_pol 1
bind lb vserver outlook –policyName pr_appfw_pol –priority “20”
2. Run the following commands to enable the AppFlow feature, configure an AppFlow collector, action, and policy, and bind the policy globally or to the load balancing virtual server:
add appflow collector <name> -IPAddress <ipaddress>
set appflow param [-SecurityInsightRecordInterval <secs>] [-SecurityInsightTraffic ( ENABLED | DISABLED )]
add appflow action <name> -collectors <string>
add appflow policy <name> <rule> <action>
bind appflow global <policyName> <priority> [<gotoPriorityExpression>] [-type <type>]
bind lb vserver <vserver> -policyName <policy> -priority <priority>
add appflow collector col -IPAddress 10.102.63.85
set appflow param -SecurityInsightRecordInterval 600 -SecurityInsightTraffic ENABLED
add appflow action act1 -collectors col
add appflow action af_action_Sap_10.102.63.85 -collectors col
add appflow policy pol1 true act1
add appflow policy af_policy_Sap_10.102.63.85 true af_action_Sap_10.102.63.85
bind appflow global pol1 1 END -type REQ_DEFAULT
bind lb vserver Sap –policyName af_action_Sap_10.102.63.85 –priority “20”
To enable AppFlow from NetScaler MAS
1. In a web browser, type the IP address of the NetScaler Management and Analytics System (for example, http://192.168.100.1).
2. In User Name and Password, enter the administrator credentials.
3. Navigate to Networks > Instances, and select the NetScaler instance you want to enable AppFlow.
4. From the Action drop-down, select Enable/Disable Insight.
5. Select the virtual servers, and click Enable AppFlow.
6. In the Enable AppFlow field, type true, and select Security Insight.
7. Click Ok.
If you configure geo locations in NetScaler MAS, Security Insight reports include the exact geographic locations from which client requests originate. To enable geo locations, specify a private IP block or range of IP addresses for every geographic location in your organization. Add that information in the Geo Database file, along with the city/state/country name and the latitude and longitude coordinates of each location. Contact your Citrix representative to obtain the Geo Database file, and then upload the file to the NetScaler instance.
To configure geo locations
The entry must be in the following format:
<start IP>,<end IP>,,<country>,<state>,,<city>,,longitude,latitude
3. Run the following commands to enable geo-location logging and logging in the CEF format:
You can use NetScaler Insight Center to monitor and manage your incoming traffic’s IP Reputation. You can configure policies to add more IPs as malicious, and create a customized block list.
To know learn about configuring and using IP Reputation, see IP Reputation.
The IP Reputation feature provides attack-related information about malicious IP addresses. For example, it reports IP Reputation Score, IP Reputation category, IP Reputation attack time, Device IP, and details about the Client IP address.
IP Reputation score indicates risk associated with an IP address. The score has the following are the ranges:
|IP Reputation score||Level of Risk|
21 – 40
41 – 60
61 – 80
81 – 100
To monitor IP Reputation
1. Navigate to Analytics > Security Insight, and select the application you want to monitor.
2. In the Threat Index tab, select IP Reputation.
3. Select a severity to display more details of the attacks that were at that level. You can click on the bar graph or in the table under the graph.
4. Select the time period for which you want to view the details. You can use the time slider to further customize the selected period. Then, click Go.
5. To customize the display, click the settings button.
You can set and view thresholds on safety index and threat index of applications in Security Insight.
To set a threshold
1. Navigate to System > Analytics Settings > Thresholds, and select Add.
2. Select the traffic type as Security in the Traffic Type field, and enter required information in the other appropriate fields such as Name, Duration, and entity.
3. In the Rule section, use the Metric, Comparator, and Value fields to set a threshold.
For example, "Threat Index" ">" "5"
4. Click Create.
To view the threshold breaches
1. Navigate to Analytics > Security Insight > Devices, and select the NetScaler instance.
2. In the Application section, you can view the number of threshold breaches occurred for each virtual server in the Threshold Breach column.
The following use cases describe how you can use security insight to assess the threat exposure of applications and improve security measures.
In this use case, you have a set of applications that are exposed to attacks, and you have configured NetScaler MAS to monitor the threat environment. You need to frequently review the threat index, safety index, and the type and severity of any attacks that the applications might have experienced, so that you can focus first on the applications that need the most attention. The security insight dashboard provides a summary of the threats experienced by your applications over a time period of your choosing, and for a selected NetScaler device. It displays the list of applications, their threat and safety indexes, and the total number of attacks for the chosen time period.
For example, you might be monitoring Microsoft Outlook, Microsoft Lync, SharePoint, and a SAP application, and you might want to review a summary of the threat environment for these applications.
To obtain a summary of the threat environment, log on to NetScaler MAS, and then navigate to Analytics > Security Insight.
Key information is displayed for each application. The default time period is 1 hour.
To view information for a different time period, from the drop-down at the top-left, select a time period.
To view a summary for a different NetScaler instance, under Devices, click the IP address of the NetScaler instance. To sort the application list by a given column, click the column header.
After reviewing a summary of the threat environment on the Security Insight dashboard to identify the applications that have a high threat index and a low safety index, you want to determine their threat exposure before deciding how to secure them. That is, you want to determine the type and severity of the attacks that have degraded their index values. You can determine the threat exposure of an application by reviewing the application summary.
In this example, Microsoft Outlook has a threat index value of 6, and you want to know what factors are contributing to this high threat index.
To determine the threat exposure of Microsoft Outlook, on the Security Insight dashboard, click Outlook. The application summary includes a map that identifies the geographic location of the server.
Click Threat Index > Security Check Violations and review the violation information that appears.
Click Signature Violations and review the violation information that appears.
After reviewing the threat exposure of an application, you want to determine what application security configurations are in place and what configurations are missing for that application. You can obtain this information by drilling down into the application’s safety index summary.
The safety index summary gives you information about the effectiveness of the following security configurations:
In the previous use case, you reviewed the threat exposure of Microsoft Outlook, which has a threat index value of 6. Now, you want to know what security configurations are in place for Outlook and what configurations can be added to improve its threat index.
On the Security Insight dashboard, click Outlook, and then click the Safety Index tab. Review the information provided in the Safety Index Summary area.
On the Application Firewall Configuration node, click Outlook_Profile and review the security check and signature violation information in the pie charts.
Review the configuration status of each protection type in the application firewall summary table. To sort the table on a column, click the column header.
Click the NetScaler System Security node and review the system security settings and Citrix recommendations to improve the application safety index.
The applications that need immediate attention are those having a high threat index and a low safety index.
In this example, both Microsoft Outlook and Microsoft Lync have a high threat index value of 6, but Lync has the lower of the two safety indexes. Therefore, you might have to focus your attention on Lync before improving the threat environment for Outlook.
You might want to determine how many attacks occurred on a given application at a given point in time, or you might want to study the attack rate for a specific time period.
For example, you might want to view the number of attacks on Microsoft Lync in the past week. On the Security Insight dashboard, click Lync > Total Violations. By default, the graph is plotted for the last one hour.
To plot the graph of violations for the past week, from the time period list, select 1 Week. In this example, you see a surge in attacks from February 1.
You might want to view a list of the attacks on an application and gain insights into the type and severity of attacks, actions taken by the NetScaler instance, resources requested, and the source of the attacks.
For example, you might want to determine how many attacks on Microsoft Lync were blocked, what resources were requested, and the IP addresses of the sources.
On the Security Insight dashboard, click Lync > Total Violations. In the table, click the filter icon in the Action Taken column header, and then select Blocked.
NetScaler instances uses log expressions configured with the Application Firewall profile to take action for the attacks on an application in your enterprise. In Security Insight, you can view the values returned for the log expressions used by the NetScaler instance. These values include, request header, request body and so on. Additional to the log expression values, you can also view the log expression name and the comment for the log expression defined in the Application Firewall profile that the NetScaler instance used to take action for the attack.
Ensure that you:
For example, you might want to view the values of the log expression returned by the NetScaler instance for the action it took for an attack on the Microsoft Lync in your enterprise.
On the Security Insight dashboard, navigate to Lync > Total Violations. In the Application Summary table, click the URL to view the complete details of the violation in the Violation Information page including the log expression name, comment, and the values returned by the NetScaler instance for the action.
Security breaches occur after you deploy the security configuration on a NetScaler instance, but you might want to assess the effectiveness of the security configuration before you deploy it.
For example, you might want to assess the safety index of the configuration for the SAP application on the NetScaler instance with IP address 10.102.60.27.
On the Security Insight dashboard, under Devices, click the IP address of the NetScaler instance that you configured. You can see that both the threat index and the total number of attacks are 0. Threat index is a direct reflection of the number and type of attacks on the application. Zero attacks indicate that the application is not under any threat.
Click Sap > Safety Index > SAP_Profile and assess the safety index information that appears.
In the application firewall summary, you can view the configuration status of different protection settings. If a setting is set to log or if a setting is not configured, the application is assigned a lower safety index.