ELIAS

Writing an image to USB (with StickWizz)

March 26, 2025

Contributed by:

S S C

Requires
Image file as a `.stw` or `.dd` file on a PC running Windows 10 or later versions
StickWizz application on your PC (see Preparing a recovery image for USB)
USB stick on local port with 4 GB memory space, write access

Plug the USB stick into the PC.
Note that the Windows Explorer must not be open on the USB drive.
Run the StickWizz.exe program.

The language depends on the Windows display language selected. The checksum is calculated and compared to the one provided.
Check whether the appropriate source under Image file (1) and the appropriate destination under Device (3) are selected.
Click Write (7).

The image is written to the USB stick. A message confirms the successful completion.

stickwizz_1


1	After StickWizz is started, it shows a .stw or .dd file located in the same directory.
2	Browse to select your image file from another directory, if required.
3	Device /drive, on which a USB stick is connected.Choose a different drive if required.
4	Delete all data from the selected device (before writing the image)
5	During the write process, each written data packet will be compared to the source.
6	As soon as StickWizz opens with the specified file, the checksum is calculated and displayed.
7	Start writing

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Writing an image to USB (with StickWizz)

March 26, 2025

Contributed by:

S S C

March 26, 2025

Contributed by:

S S C

Writing an image to USB (with StickWizz)

In this article