Product documentation
XenCenter
2024 8.2.7
View PDF

Monitoring host and dom0 resources with NRPE

March 19, 2024
Contributed by: 
X

Note:

The NRPE feature is available for XenServer Premium or Trial Edition customers. For more information about XenServer licensing, see Licensing. To upgrade, or to buy a XenServer license, visit the XenServer website.

You can use XenCenter YYYY.x.x to manage your XenServer 8 and Citrix Hypervisor 8.2 CU1 non-production environments. However, to manage your Citrix Hypervisor 8.2 CU1 production environment, use XenCenter 8.2.7.

You can install XenCenter 8.2.7 and XenCenter YYYY.x.x on the same system. Installing XenCenter YYYY.x.x does not overwrite your XenCenter 8.2.7 installation.

Users with the Pool Admin role can use any third-party monitoring tool that supports the Nagios Remote Plugin Executor (NRPE) to monitor resources consumed by your XenServer host and dom0 - the control domain of your host.

You can use the following check plugins to monitor host and dom0 resources:

Metric NRPE check name Description Default warning threshold Default critical threshold Performance data returned
Host CPU Load check_host_load Gets and checks the current load per physical CPU of the host, where load refers to the number of vCPU(s) in a running or runnable state. 3 4 Current system load of the CPU of the host (calculated by taking the average load of the physical CPU of the host).
Host CPU Usage (%) check_host_cpu Gets and checks the current average overall CPU usage of the host. 80% 90% The percentage of host CPU that is currently free and the percentage that is in use.
Host Memory Usage (%) check_host_memory Gets and checks the current memory usage of the host. 80% 90% The percentage of host memory that is currently free and the percentage that is in use.
Host vGPU Usage (%) check_vgpu Gets and checks all the current running Nvidia vGPU usage of the host. 80% 90% The percentage of running vGPU that is currently free and the percentage that is in use.
Host vGPU Memory Usage (%) check_vgpu_memory Gets and checks all the current running Nvidia vGPU memory usage (including the shared memory and graphic memory) of the host. 80% 90% The percentage of running vGPU memory (including the shared memory and graphic memory) that is currently free and the percentage that is in use.
Dom0 CPU Load check_load Gets and checks the current system load average per CPU of dom0, where load refers to the number of processes in a running or runnable state. 2.7,2.6,2.5 3.2,3.1,3 Host CPU load data calculated by taking the average of the last 1, 5, and 15 minutes.
Dom0 CPU Usage (%) check_cpu Gets and checks the current average overall CPU usage of dom0. 80% 90% The average overall CPU usage of dom0 as a percentage.
Dom0 Memory Usage (%) check_memory Gets and checks the current memory usage of dom0. 80% 90% The percentage of dom0 memory that is currently free and the percentage that is in use.
Dom0 Free Swap (%) check_swap Gets and checks the current swap usage of dom0. 20% 10% The percentage of MB on dom0 that is currently free.
Dom0 Root Partition Free Space (%) check_disk_root Gets and checks the current root partition usage of dom0. 20% 10% The percentage of MB on the dom0 root partition that is currently free.
Dom0 Log Partition Free Space (%) check_disk_log Gets and checks the current log partition usage of dom0. 20% 10% The percentage of MB on the dom0 log partition that is currently free.
Toolstack Status check_xapi Gets and checks the status of the XenServer management toolstack (also known as XAPI).     XAPI elapsed uptime in seconds.
Multipath Status check_multipath Gets and checks the status of the storage paths.     The status of the storage paths. OK indicates that all paths are active, WARNING indicates that some paths have failed but more than one path is active, CRITICAL indicates that there is only one path active or that all paths have failed, UNKNOWN indicates that host multipathing is disabled and that the status of the paths cannot be fetched.

NRPE is an on-premises service that runs in dom0 and listens on TCP port (default) 5666 for check execution requests from a monitoring tool. After a request arrives, NRPE parses it, finds the corresponding check command including the parameter’s details from the configuration file, and then runs it. The result of the check is sent to the monitoring tool, which stores the results of past checks and provides a graph showing the historical performance data.

Prerequisites

To be able to use NRPE to monitor host and dom0 resources, the monitoring tool you are using must meet the following prerequisites:

  • The monitoring tool must be compatible with NRPE version 4.1.0.
  • To allow communication between NRPE and the monitoring tool, the monitoring tool must support TLS 1.2 with ciphers ECDHE-RSA-AES256-GCM-SHA384 and ECDHE-RSA-AES128-GCM-SHA256, and the EC curve is secp384r1.

Constraints

  • You can configure NRPE settings for an entire pool or for a standalone host that is not part of a pool. Currently, you cannot configure NRPE settings for an individual host in a pool.

  • If you add a host to a pool that already has NRPE enabled and configured on it, XenCenter does not automatically apply the pool’s NRPE settings to the new host. You must reconfigure NRPE settings on the pool after adding the new host or configure the new host with same NRPE settings before adding it to the pool.

    Note:

    When reconfiguring NRPE settings on a pool after adding a new host, ensure the host is up and running.

  • If a host is removed from a pool with NRPE enabled and configured on it, XenCenter does not alter the NPRE settings on the host or the pool.

Configure NRPE by using XenCenter

You can configure NRPE by using XenCenter or the xe CLI. For more information on how to configure NRPE by using the xe CLI, see Configure NRPE by using the xe CLI.

To configure NRPE for a standalone host or for an entire pool, go to the NRPE Configuration tab on the Properties dialog for your host/pool and follow these steps:

Note:

When configuring NRPE for a pool, the NRPE Configuration tab displays the default NRPE configuration values for the entire pool.

  1. In the Infrastructure view, choose the host/pool that you want to configure NRPE settings for.
  2. In the General tab, click Properties.
  3. In the Properties dialog, select the NRPE tab.
  4. Select the Enable NRPE check box.
  5. To add more monitoring servers that are allowed to talk to the NRPE daemon, specify the hosts as a comma-delimited list of IP addresses or host names. They can be specified in the following formats:
    • IP address (only supports IPv4)
    • Classless Inter-Domain Routing (CIDR) (format: xxx.xxx.xxx.xxx/n, e.g. 192.168.1.0/24)
    • Host name
  6. To enable debug logging, select the Record debugging messages to syslog check box.
  7. To enable SSL logging, select the Record SSL message to syslog check box.

  8. (Optional) Adjust the warning and critical thresholds by modifying the values in the warning and critical thresholds table.

    For some check plugins, you can set warning and critical threshold values so that if the value returned by a check plugin exceeds the threshold values, an alert is generated. The warning threshold indicates a potential issue and the critical threshold indicates a more serious issue that requires immediate attention. Although default values are set for the warning and critical thresholds, you can adjust the threshold values.

  9. Click OK to apply any configuration changes to your host/pool.

Use XenCenter to configure NRPE settings for your host

Monitoring host and dom0 resources with NRPE
March 19, 2024
Contributed by: 
X
March 19, 2024
Contributed by: 
X

In this article

Site feedback | Privacy and legal terms | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.