Product Documentation

Setting Up the Model 2010 Appliance

May 16, 2011

The following procedures describe how to set up the Access Gateway Model 2010 appliance for the first time.

To physically connect the Access Gateway appliance

  1. Install Access Gateway in a rack if it is rack-mounted.
  2. Connect the power cord to the AC power receptacle.
  3. Connect either the serial cable to a Windows-based computer, a cross-over cable to a Windows-based computer, or an RJ-45 network cable to a network switch and Access Gateway.
  4. Configure the TCP/IP settings by following the instructions in Configuring the Model 2010 Appliance.
Figure 1. Access Gateway connection options using a cross-over cable, a network switch, or terminal emulation
Displays a diagram of the Access Gateway connection options.