Product Documentation

service

Sep 02, 2016

Configuration for service resource.

Properties (click to see Operations)

Name Data Type Permissions Description
name
<String>
Read-write
Name for the service. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the service has been created.
Minimum length = 1
ip
<String>
Read-write
IP to assign to the service.
Minimum length = 1
servername
<String>
Read-write
Name of the server that hosts the service.
Minimum length = 1
servicetype
<String>
Read-write
Protocol in which data is exchanged with the service.
Possible values = HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, RPCSVR, DNS, ADNS, SNMP, RTSP, DHCPRA, ANY, SIP_UDP, SIP_TCP, SIP_SSL, DNS_TCP, ADNS_TCP, MYSQL, MSSQL, ORACLE, RADIUS, RADIUSListener, RDP, DIAMETER, SSL_DIAMETER, TFTP, SMPP, PPTP, GRE, SYSLOGTCP, SYSLOGUDP, FIX, SSL_FIX
port
<Integer>
Read-write
Port number of the service.
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
cleartextport
<Integer>
Read-write
Port to which clear text data must be sent after the appliance decrypts incoming SSL traffic. Applicable to transparent SSL services.
Minimum value = 1
cachetype
<String>
Read-write
Cache type supported by the cache server.
Possible values = TRANSPARENT, REVERSE, FORWARD
maxclient
<Double>
Read-write
Maximum number of simultaneous open connections to the service.
Minimum value = 0
Maximum value = 4294967294
healthmonitor
<String>
Read-write
Monitor the health of this service. Available settings function as follows:
YES - Send probes to check the health of the service.
NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.
Default value: YES
Possible values = YES, NO
maxreq
<Double>
Read-write
Maximum number of requests that can be sent on a persistent connection to the service.
Note: Connection requests beyond this value are rejected.
Minimum value = 0
Maximum value = 65535
cacheable
<String>
Read-write
Use the transparent cache redirection virtual server to forward requests to the cache server.
Note: Do not specify this parameter if you set the Cache Type parameter.
Default value: NO
Possible values = YES, NO
cip
<String>
Read-write
Before forwarding a request to the service, insert an HTTP header with the client's IPv4 or IPv6 address as its value. Used if the server needs the client's IP address for security, accounting, or other purposes, and setting the Use Source IP parameter is not a viable option.
Possible values = ENABLED, DISABLED
cipheader
<String>
Read-write
Name for the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If you set the Client IP parameter, and you do not specify a name for the header, the appliance uses the header name specified for the global Client IP Header parameter (the cipHeader parameter in the set ns param CLI command or the Client IP Header parameter in the Configure HTTP Parameters dialog box at System > Settings > Change HTTP parameters). If the global Client IP Header parameter is not specified, the appliance inserts a header with the name "client-ip.".
Minimum length = 1
usip
<String>
Read-write
Use the client's IP address as the source IP address when initiating a connection to the server. When creating a service, if you do not set this parameter, the service inherits the global Use Source IP setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the service.
Possible values = YES, NO
pathmonitor
<String>
Read-write
Path monitoring for clustering.
Possible values = YES, NO
pathmonitorindv
<String>
Read-write
Individual Path monitoring decisions.
Possible values = YES, NO
useproxyport
<String>
Read-write
Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection.
Note: This parameter is available only when the Use Source IP (USIP) parameter is set to YES.
Possible values = YES, NO
sc
<String>
Read-write
State of SureConnect for the service.
Default value: OFF
Possible values = ON, OFF
sp
<String>
Read-write
Enable surge protection for the service.
Possible values = ON, OFF
rtspsessionidremap
<String>
Read-write
Enable RTSP session ID mapping for the service.
Default value: OFF
Possible values = ON, OFF
clttimeout
<Double>
Read-write
Time, in seconds, after which to terminate an idle client connection.
Minimum value = 0
Maximum value = 31536000
svrtimeout
<Double>
Read-write
Time, in seconds, after which to terminate an idle server connection.
Minimum value = 0
Maximum value = 31536000
customserverid
<String>
Read-write
Unique identifier for the service. Used when the persistency type for the virtual server is set to Custom Server ID.
Default value: "None"
serverid
<Double>
Read-write
The identifier for the service. This is used when the persistency type is set to Custom Server ID.
cka
<String>
Read-write
Enable client keep-alive for the service.
Possible values = YES, NO
tcpb
<String>
Read-write
Enable TCP buffering for the service.
Possible values = YES, NO
cmp
<String>
Read-write
Enable compression for the service.
Possible values = YES, NO
maxbandwidth
<Double>
Read-write
Maximum bandwidth, in Kbps, allocated to the service.
Minimum value = 0
Maximum value = 4294967287
accessdown
<String>
Read-write
Use Layer 2 mode to bridge the packets sent to this service if it is marked as DOWN. If the service is DOWN, and this parameter is disabled, the packets are dropped.
Default value: NO
Possible values = YES, NO
monthreshold
<Double>
Read-write
Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN.
Minimum value = 0
Maximum value = 65535
state
<String>
Read-write
Initial state of the service.
Default value: ENABLED
Possible values = ENABLED, DISABLED
downstateflush
<String>
Read-write
Flush all active transactions associated with a service whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.
Default value: ENABLED
Possible values = ENABLED, DISABLED
tcpprofilename
<String>
Read-write
Name of the TCP profile that contains TCP configuration settings for the service.
Minimum length = 1
Maximum length = 127
httpprofilename
<String>
Read-write
Name of the HTTP profile that contains HTTP configuration settings for the service.
Minimum length = 1
Maximum length = 127
hashid
<Double>
Read-write
A numerical identifier that can be used by hash based load balancing methods. Must be unique for each service.
Minimum value = 1
comment
<String>
Read-write
Any information about the service.
appflowlog
<String>
Read-write
Enable logging of AppFlow information.
Default value: ENABLED
Possible values = ENABLED, DISABLED
netprofile
<String>
Read-write
Network profile to use for the service.
Minimum length = 1
Maximum length = 127
td
<Double>
Read-write
Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0
Maximum value = 4094
processlocal
<String>
Read-write
By turning on this option packets destined to a service in a cluster will not under go any steering. Turn this option for single packet request response mode or when the upstream device is performing a proper RSS for connection based distribution.
Default value: DISABLED
Possible values = ENABLED, DISABLED
dnsprofilename
<String>
Read-write
Name of the DNS profile to be associated with the service. DNS profile properties will applied to the transactions processed by a service. This parameter is valid only for ADNS and ADNS-TCP services.
Minimum length = 1
Maximum length = 127
monconnectionclose
<String>
Read-write
Close monitoring connections by sending the service a connection termination message with the specified bit set.
Default value: NONE
Possible values = RESET, FIN
ipaddress
<String>
Read-write
The new IP address of the service.
weight
<Double>
Read-write
Weight to assign to the monitor-service binding. When a monitor is UP, the weight assigned to its binding with the service determines how much the monitor contributes toward keeping the health of the service above the value configured for the Monitor Threshold parameter.
Minimum value = 1
Maximum value = 100
monitor_name_svc
<String>
Read-write
Name of the monitor bound to the specified service.
Minimum length = 1
riseapbrstatsmsgcode
<Integer>
Read-write
The code indicating the rise apbr status.
delay
<Double>
Read-write
Time, in seconds, allocated to the NetScaler appliance for a graceful shutdown of the service. During this period, new requests are sent to the service only for clients who already have persistent sessions on the appliance. Requests from new clients are load balanced among other available services. After the delay time expires, no requests are sent to the service, and the service is marked as unavailable (OUT OF SERVICE).
graceful
<String>
Read-write
Shut down gracefully, not accepting any new connections, and disabling the service when all of its connections are closed.
Default value: NO
Possible values = YES, NO
all
<Boolean>
Read-write
Display both user-configured and dynamically learned services.
Internal
<Boolean>
Read-write
Display only dynamically learned services.
newname
<String>
Read-write
New name for the service. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.
Minimum length = 1
numofconnections
<Integer>
Read-only
This will tell the number of client side connections are still open.
policyname
<String>
Read-only
The name of the policyname for which this service is bound.
serviceconftype
<Boolean>
Read-only
The configuration type of the service.
serviceconftype2
<String>
Read-only
The configuration type of the service (Internal/Dynamic/Configured).
Possible values = Configured, Dynamic, Internal
value
<String>
Read-only
SSL status.
Possible values = Certkey not bound, SSL feature disabled
gslb
<String>
Read-only
The GSLB option for the corresponding virtual server.
Possible values = REMOTE, LOCAL
dup_state
<String>
Read-only
Added this field for getting state value from table.
Possible values = ENABLED, DISABLED
publicip
<String>
Read-only
public ip.
publicport
<Integer>
Read-only
public port.
Minimum value = 1
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
svrstate
<String>
Read-only
The state of the service.
Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
monitor_state
<String>
Read-only
The running state of the monitor on this service.
Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
monstatcode
<Integer>
Read-only
The code indicating the monitor response.
lastresponse
<String>
Read-only
The string form of monstatcode.
responsetime
<Double>
Read-only
Response time of this monitor.
riseapbrstatsmsgcode2
<Integer>
Read-only
The code indicating other rise stats.
monstatparam1
<Integer>
Read-only
First parameter for use with message code.
monstatparam2
<Integer>
Read-only
Second parameter for use with message code.
monstatparam3
<Integer>
Read-only
Third parameter for use with message code.
statechangetimesec
<String>
Read-only
Time when last state change happened. Seconds part.
statechangetimemsec
<Double>
Read-only
Time at which last state change happened. Milliseconds part.
tickssincelaststatechange
<Double>
Read-only
Time in 10 millisecond ticks since the last state change.
stateupdatereason
<Double>
Read-only
Checks state update reason on the secondary node.
clmonowner
<Double>
Read-only
Tells the mon owner of the service.
Minimum value = 0
Maximum value = 32
clmonview
<Double>
Read-only
Tells the view id of the monitoring owner.
serviceipstr
<String>
Read-only
This field has been intorduced to show the dbs services ip.
oracleserverversion
<String>
Read-only
Oracle server version.
Default value: 10G
Possible values = 10G, 11G
__count
<Double>
Read-only
count parameter

Operations (click to see Properties)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

메모

Mandatory parameters are marked in red and placeholder content is marked in <green>.

add

URL: http://<netscaler-ip-address>/nitro/v1/config/service

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>,
      "ip":<String_value>,
      "servername":<String_value>,
      "servicetype":<String_value>,
      "port":<Integer_value>,
      "cleartextport":<Integer_value>,
      "cachetype":<String_value>,
      "maxclient":<Double_value>,
      "healthmonitor":<String_value>,
      "maxreq":<Double_value>,
      "cacheable":<String_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "usip":<String_value>,
      "pathmonitor":<String_value>,
      "pathmonitorindv":<String_value>,
      "useproxyport":<String_value>,
      "sc":<String_value>,
      "sp":<String_value>,
      "rtspsessionidremap":<String_value>,
      "clttimeout":<Double_value>,
      "svrtimeout":<Double_value>,
      "customserverid":<String_value>,
      "serverid":<Double_value>,
      "cka":<String_value>,
      "tcpb":<String_value>,
      "cmp":<String_value>,
      "maxbandwidth":<Double_value>,
      "accessdown":<String_value>,
      "monthreshold":<Double_value>,
      "state":<String_value>,
      "downstateflush":<String_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "hashid":<Double_value>,
      "comment":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "td":<Double_value>,
      "processlocal":<String_value>,
      "dnsprofilename":<String_value>,
      "monconnectionclose":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http://<netscaler-ip-address>/nitro/v1/config/service/name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http://<netscaler-ip-address>/nitro/v1/config/service

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>,
      "ipaddress":<String_value>,
      "maxclient":<Double_value>,
      "maxreq":<Double_value>,
      "cacheable":<String_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "usip":<String_value>,
      "pathmonitor":<String_value>,
      "pathmonitorindv":<String_value>,
      "useproxyport":<String_value>,
      "sc":<String_value>,
      "sp":<String_value>,
      "rtspsessionidremap":<String_value>,
      "healthmonitor":<String_value>,
      "clttimeout":<Double_value>,
      "svrtimeout":<Double_value>,
      "customserverid":<String_value>,
      "serverid":<Double_value>,
      "cka":<String_value>,
      "tcpb":<String_value>,
      "cmp":<String_value>,
      "maxbandwidth":<Double_value>,
      "accessdown":<String_value>,
      "monthreshold":<Double_value>,
      "weight":<Double_value>,
      "monitor_name_svc":<String_value>,
      "downstateflush":<String_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "hashid":<Double_value>,
      "comment":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "processlocal":<String_value>,
      "dnsprofilename":<String_value>,
      "monconnectionclose":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http://<netscaler-ip-address>/nitro/v1/config/service?action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>,
      "maxclient":true,
      "maxreq":true,
      "cacheable":true,
      "cip":true,
      "usip":true,
      "pathmonitor":true,
      "pathmonitorindv":true,
      "useproxyport":true,
      "sc":true,
      "sp":true,
      "rtspsessionidremap":true,
      "customserverid":true,
      "serverid":true,
      "cka":true,
      "tcpb":true,
      "cmp":true,
      "maxbandwidth":true,
      "accessdown":true,
      "monthreshold":true,
      "clttimeout":true,
      "riseapbrstatsmsgcode":true,
      "svrtimeout":true,
      "tcpprofilename":true,
      "httpprofilename":true,
      "hashid":true,
      "appflowlog":true,
      "netprofile":true,
      "processlocal":true,
      "dnsprofilename":true,
      "monconnectionclose":true,
      "cipheader":true,
      "healthmonitor":true,
      "downstateflush":true,
      "comment":true
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

enable

URL: http://<netscaler-ip-address>/nitro/v1/config/service?action=enable

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

disable

URL: http://<netscaler-ip-address>/nitro/v1/config/service?action=disable

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>,
      "delay":<Double_value>,
      "graceful":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename

URL: http://<netscaler-ip-address>/nitro/v1/config/service?action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Content-Type:application/json

Request Payload:

{"service":{
      "name":<String_value>,
      "newname":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http://<netscaler-ip-address>/nitro/v1/config/service

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/config/service?args=name:<String_value>,all:<Boolean_value>,Internal:<Boolean_value>

Use this query-parameter to get service resources based on additional properties.

attrs

http://<netscaler-ip-address>/nitro/v1/config/service?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/service?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of service resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/service?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/service?pagesize=#no&pageno=#no

Use this query-parameter to get the service resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "service": [ {
name:<String_value>,all:<Boolean_value>,Internal:<Boolean_value>      "numofconnections":<Integer_value>,
      "servername":<String_value>,
      "policyname":<String_value>,
      "servicetype":<String_value>,
      "serviceconftpye":<Boolean_value>,
      "serviceconftype":<Boolean_value>,
      "serviceconftype2":<String_value>,
      "port":<Integer_value>,
      "value":<String_value>,
      "cleartextport":<Integer_value>,
      "gslb":<String_value>,
      "cachetype":<String_value>,
      "maxclient":<Double_value>,
      "maxreq":<Double_value>,
      "cacheable":<String_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "usip":<String_value>,
      "pathmonitor":<String_value>,
      "pathmonitorindv":<String_value>,
      "useproxyport":<String_value>,
      "sc":<String_value>,
      "dup_state":<String_value>,
      "sp":<String_value>,
      "rtspsessionidremap":<String_value>,
      "clttimeout":<Double_value>,
      "svrtimeout":<Double_value>,
      "publicip":<String_value>,
      "publicport":<Integer_value>,
      "customserverid":<String_value>,
      "serverid":<Double_value>,
      "cka":<String_value>,
      "tcpb":<String_value>,
      "processlocal":<String_value>,
      "cmp":<String_value>,
      "maxbandwidth":<Double_value>,
      "accessdown":<String_value>,
      "svrstate":<String_value>,
      "delay":<Double_value>,
      "ipaddress":<String_value>,
      "monthreshold":<Double_value>,
      "monitor_state":<String_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "responsetime":<Double_value>,
      "riseapbrstatsmsgcode":<Integer_value>,
      "riseapbrstatsmsgcode2":<Integer_value>,
      "monstatparam1":<Integer_value>,
      "monstatparam2":<Integer_value>,
      "monstatparam3":<Integer_value>,
      "downstateflush":<String_value>,
      "statechangetimesec":<String_value>,
      "statechangetimemsec":<Double_value>,
      "timesincelaststatechange":<Double_value>,
      "tickssincelaststatechange":<Double_value>,
      "stateupdatereason":<Double_value>,
      "clmonowner":<Double_value>,
      "clmonview":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "hashid":<Double_value>,
      "graceful":<String_value>,
      "comment":<String_value>,
      "healthmonitor":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "serviceipstr":<String_value>,
      "weight":<Double_value>,
      "td":<Double_value>,
      "oracleserverversion":<String_value>,
      "dnsprofilename":<String_value>,
      "monconnectionclose":<String_value>
}]}

get

URL: http://<netscaler-ip-address>/nitro/v1/config/service/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/service/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/service/name_value<String>?view=summary

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "service": [ {
name:<String_value>,all:<Boolean_value>,Internal:<Boolean_value>      "numofconnections":<Integer_value>,
      "servername":<String_value>,
      "policyname":<String_value>,
      "servicetype":<String_value>,
      "serviceconftpye":<Boolean_value>,
      "serviceconftype":<Boolean_value>,
      "serviceconftype2":<String_value>,
      "port":<Integer_value>,
      "value":<String_value>,
      "cleartextport":<Integer_value>,
      "gslb":<String_value>,
      "cachetype":<String_value>,
      "maxclient":<Double_value>,
      "maxreq":<Double_value>,
      "cacheable":<String_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "usip":<String_value>,
      "pathmonitor":<String_value>,
      "pathmonitorindv":<String_value>,
      "useproxyport":<String_value>,
      "sc":<String_value>,
      "dup_state":<String_value>,
      "sp":<String_value>,
      "rtspsessionidremap":<String_value>,
      "clttimeout":<Double_value>,
      "svrtimeout":<Double_value>,
      "publicip":<String_value>,
      "publicport":<Integer_value>,
      "customserverid":<String_value>,
      "serverid":<Double_value>,
      "cka":<String_value>,
      "tcpb":<String_value>,
      "processlocal":<String_value>,
      "cmp":<String_value>,
      "maxbandwidth":<Double_value>,
      "accessdown":<String_value>,
      "svrstate":<String_value>,
      "delay":<Double_value>,
      "ipaddress":<String_value>,
      "monthreshold":<Double_value>,
      "monitor_state":<String_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "responsetime":<Double_value>,
      "riseapbrstatsmsgcode":<Integer_value>,
      "riseapbrstatsmsgcode2":<Integer_value>,
      "monstatparam1":<Integer_value>,
      "monstatparam2":<Integer_value>,
      "monstatparam3":<Integer_value>,
      "downstateflush":<String_value>,
      "statechangetimesec":<String_value>,
      "statechangetimemsec":<Double_value>,
      "timesincelaststatechange":<Double_value>,
      "tickssincelaststatechange":<Double_value>,
      "stateupdatereason":<Double_value>,
      "clmonowner":<Double_value>,
      "clmonview":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "hashid":<Double_value>,
      "graceful":<String_value>,
      "comment":<String_value>,
      "healthmonitor":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "serviceipstr":<String_value>,
      "weight":<Double_value>,
      "td":<Double_value>,
      "oracleserverversion":<String_value>,
      "dnsprofilename":<String_value>,
      "monconnectionclose":<String_value>
}]}

count

URL: http://<netscaler-ip-address>/nitro/v1/config/service?count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Accept:application/json

Response:

HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "service": [ { "__count": "#no"} ] }