Product Documentation

route6

Sep 12, 2016

The following operations can be performed on "route6":

add | clear | rm | set | unset | show

add route6

Adds an IPv6 static route to the routing table of the NetScaler appliance.

Synopsys

add route6 <network> [<gateway>] [-vlan <positive_integer> | -vxlan <positive_integer>] [-weight <positive_integer>] [-distance <positive_integer>] [-cost <positive_integer>] [-advertise ( DISABLED | ENABLED )] [-msr ( ENABLED | DISABLED ) [-monitor <string>]] [-td <positive_integer>] [-ownerGroup <string>]

Arguments

network

IPv6 network address for which to add a route entry to the routing table of the NetScaler appliance.

gateway

The gateway for this route. The value for this parameter is either an IPv6 address or null.

Default value: 0

vlan

Integer value that uniquely identifies a VLAN through which the NetScaler appliance forwards the packets for this route.

Default value: 0

Minimum value: 0

Maximum value: 4094

vxlan

Integer value that uniquely identifies a VXLAN through which the NetScaler appliance forwards the packets for this route.

Minimum value: 1

Maximum value: 16777215

weight

Positive integer used by the routing algorithms to determine preference for this route over others of equal cost. The lower the weight, the higher the preference.

Default value: 1

Minimum value: 1

Maximum value: 65535

distance

Administrative distance of this route from the appliance.

Default value: 1

Minimum value: 1

Maximum value: 254

cost

Positive integer used by the routing algorithms to determine preference for this route. The lower the cost, the higher the preference.

Default value: 1

Minimum value: 0

Maximum value: 65535

advertise

Advertise this route.

Possible values: DISABLED, ENABLED

msr

Monitor this route with a monitor of type ND6 or PING.

Possible values: ENABLED, DISABLED

Default value: DISABLED

monitor

Name of the monitor, of type ND6 or PING, configured on the NetScaler appliance to monitor this route.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

ownerGroup

The owner node group in a Cluster for this route6. If owner node group is not specified then the route is treated as Striped route.

Default value: DEFAULT_NG

Example

add route6 ::/0 2004::1  add route6 ::/0 FE80::67 -vlan 5

clear route6

Removes IPv6 routes of the specified type (protocol) from the routing table of the NetScaler appliance.

Synopsys

clear route6 <routeType>

Arguments

routeType

Type of IPv6 routes to remove from the routing table of the NetScaler appliance.

rm route6

Removes a static IPv6 route from the NetScaler appliance.

Synopsys

rm route6 <network> [<gateway>] [-vlan <positive_integer> | -vxlan <positive_integer>] [-td <positive_integer>] [-ownerGroup <string>]

Arguments

network

The network of the route to be removed.

gateway

The gateway address of the route to be removed.

Default value: 0

vlan

Integer that uniquely identifies the VLAN defined for this route.

Default value: 0

Minimum value: 0

Maximum value: 4094

vxlan

Integer value that uniquely identifies a VXLAN through which the NetScaler appliance forwards the packets for this route.

Minimum value: 1

Maximum value: 16777215

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

ownerGroup

The owner node group in a Cluster for this route6. If owner node group is not specified then the route is treated as Striped route.

Default value: DEFAULT_NG

Example

rm route6 ::/0 2004::1 rm route6 ::/0 FE80::67 -vlan 5

set route6

Modifies parameters of an IPv6 static route.

Synopsys

set route6 <network> [<gateway>] [-vlan <positive_integer> | -vxlan <positive_integer>] [-weight <positive_integer>] [-distance <positive_integer>] [-cost <positive_integer>] [-advertise ( DISABLED | ENABLED )] [-msr ( ENABLED | DISABLED ) [-monitor <string>]] [-td <positive_integer>]

Arguments

network

IPv6 network address of the route entry to be modified.

gateway

The gateway for the route's destination network.

Default value: 0

vlan

Integer value that uniquely identifies a VLAN through which the NetScaler appliance forwards the packets for this route.

Default value: 0

Minimum value: 0

Maximum value: 4094

vxlan

Integer value that uniquely identifies a VXLAN through which the NetScaler appliance forwards the packets for this route.

Minimum value: 1

Maximum value: 16777215

weight

Positive integer used by the routing algorithms to determine preference for this route over others of equal cost. The lower the weight, the higher the preference.

Default value: 1

Minimum value: 1

Maximum value: 65535

distance

Administrative distance of this route from the appliance.

Default value: 1

Minimum value: 1

Maximum value: 254

cost

Positive integer used by the routing algorithms to determine preference for this route. The lower the cost, the higher the preference.

Default value: 1

Minimum value: 0

Maximum value: 65535

advertise

Advertise this route.

Possible values: DISABLED, ENABLED

msr

Monitor this route with a monitor of type ND6 or PING.

Possible values: ENABLED, DISABLED

Default value: DISABLED

monitor

Name of the monitor, of type ND6 or PING, configured on the NetScaler appliance to monitor this route.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

Example

set route6 1::1/100 2000::1 -advertise enable

unset route6

Unset the attributes of a route that were added by the add/set route command..Refer to the set route6 command for meanings of the arguments.

Synopsys

unset route6 <network> [<gateway>] [-vlan <positive_integer> | -vxlan <positive_integer>] [-td <positive_integer>] [-weight] [-distance] [-cost] [-advertise] [-msr] [-monitor]

Example

unset route6 2000::1/100 3000::1 -advertise enable

show route6

Displays configuration and state information of all IPv6 routes in the NetScaler appliance's routing table, or of the specified IPv6 route.

Synopsys

show route6 [<network> [<gateway>] [-vlan <positive_integer> | -vxlan <positive_integer>] [-td <positive_integer>]] [<routeType>] [-detail]

Arguments

network

IPv6 network address of the route entry for which to display details.

gateway

Any gateway of the route entry for which to display details.

Default value: 0

vlan

Integer that uniquely identifies the VLAN defined for this route.

Default value: 0

Minimum value: 0

Maximum value: 4094

vxlan

Integer value that uniquely identifies a VXLAN through which the NetScaler appliance forwards the packets for this route.

Minimum value: 1

Maximum value: 16777215

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0

Maximum value: 4094

routeType

The type of IPv6 routes to be to be displayed.

detail

To get a detailed view.

Outputs

gatewayName

The name of the gateway for this route.

advertise

Any gateway of the route entry for which the details are to be displayed.

type

State of the RNAT.

stateflag

dynamic

Whether this route is dynamically learned or not.

weight

Weight of this route.

distance

Administrative distance of this route from the appliance.

cost

Positive integer used by the routing algorithms to determine preference for this route. The lower the cost, the higher the preference.

data

Internal data of this route.

flags

For a dynamic route, the routing protocol from which the route was learned.

msr

Whether MSR is enabled or disabled.

monitor

Name of the monitor, of type ND6 or PING, configured on the NetScaler appliance to monitor this route.

state

Whether this route is UP or DOWN.

totalprobes

The total number of probes sent.

totalfailedprobes

The total number of failed probes.

failedprobes

Current number of failed monitoring probes.

monStatCode

The code indicating the monitor response.

monStatParam1

First parameter for use with message code.

monStatParam2

Second parameter for use with message code.

monStatParam3

Third parameter for use with message code.

data1

Internal data of this route.

routeOwners

Use this option with -dynamic and in a cluster only to specify the set of nodes from which this dynamic route has been learnt.

retain

STATIC

Static route.

PERMANENT

Permanent Route.

connected

Connected Route.

OSPFV3

For a dynamic route, the routing protocol from which the route was learned.

ISIS

If this route is dynamic then which routing protocol was it learnt from.

active

For a dynamic route, the routing protocol from which the route was learned.

BGP

For a dynamic route, the routing protocol from which the route was learned.

RIP

For a dynamic route, the routing protocol from which the route was learned.

raRoute

For a dynamic route, the routing protocol from which the route was learned.

ownerGroup

The owner node group in a Cluster for this route6. If owner node group is not specified then the route is treated as Striped route.

clusterFlags

Flags for cluster. Currently used to determine if it is a cluster system

devno

count

Example

Following is an example of the output of the show route6 command:       Flags: Static(S), Dynamic(D), Active(A)      ---------------------------------------       Network       Gateway(vlan)   Flags      -------       -----------     -----      0::0/0        2001::1            S(A)      0::0/0        FE80::90(4)        D(A)