Product Documentation

vpath

Sep 12, 2016

The following operations can be performed on "vpath":

add | rm | show | stat

add vpath

Adds vPath destination IP to which packets need to be vPath injected. NOTE: This command is deprecated.Deprecated as vPath is not supported

Synopsys

Arguments

name

Name for the vPath. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the profile is created. Choose a name that helps identify the net profile.

destIP

This is the destination ip, where vPath encapsulated packets needs to be sent

netmask

Subnet mask associated with the destination network.

gateway

Next hop gateway to reach the destination address.

Example

add vpath vPath1 -destip 10.102.1.10 

rm vpath

Remove vPath destination IP. NOTE: This command is deprecated.Deprecated as vPath is not supported

Synopsys

Arguments

name

Name of the vPath to be removed.

Example

rm netProfile prof1

show vpath

List down all vPath destination IPs. NOTE: This command is deprecated.Deprecated as vPath is not supported

Synopsys

Arguments

name

Name of the vPath whose details you want to display.

Outputs

destIP

This is the destination ip, where vPath encapsulated packets needs to be sent

netmask

Subnet mask associated with the destination network.

gateway

Next hop gateway to reach the destination address.

devno

count

stateflag

Example

show vpath

stat vpath

Display vPath statistics. NOTE: This command is deprecated.Deprecated as vPath is not supported

Synopsys

Arguments

detail

Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.

fullValues

Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated

ntimes

The number of times, in intervals of seven seconds, the statistics should be displayed.

Default value: 1

Minimum value: 0

logFile

The name of the log file to be used as input.

clearstats

Clear the statsistics / counters

Possible values: basic, full

Outputs

L2 data packets received (TotL2DataRx)

Total number of non-fragmented vPath data packets decapsulated in L2 adjacency

L3 data packets received (TotL3DataRx)

Total number of non-fragmented vPath data packets decapsulated in L3 adjacency

L2 control packets received (TotL2CntrlPkts)

Total number of vPath control packets received in L2 adjacency

L3 control packets received (TotL3CntrlPkts)

Total number of vPath control packets received in L3 adjacency

Fragmented packets received (TotFragPkts)

Total number of vPath fragments received

L2 packets transmitted (TotL2EncapPkts)

Total number of L2 vPath encapsulated packets injected to VEM

L3 packets transmitted (TotL3EncapPkts)

Total number of L3 vPath encapsulated packets injected to VEM

Fragmented packets transmitted (TotFragEncapPkts)

Number of fragmented vPath packets transmitted

Offload packets transmitted (TotOffload)

Number of offloaded vPath packets transmitted