Product Documentation

snmp option

Sep 12, 2016

The following operations can be performed on "snmp option":

set snmp option

Enables or disables SNMP options for SNMP SET and SNMP trap logging.

Synopsys

set snmp option [-snmpset ( ENABLED | DISABLED )] [-snmpTrapLogging ( ENABLED | DISABLED )] [-partitionNameInTrap ( ENABLED | DISABLED )] [-snmpTrapLoggingLevel <snmpTrapLoggingLevel>]

Arguments

snmpset

Accept SNMP SET requests sent to the NetScaler appliance, and allow SNMP managers to write values to MIB objects that are configured for write access.

Possible values: ENABLED, DISABLED

Default value: DISABLED

snmpTrapLogging

Log any SNMP trap events (for SNMP alarms in which logging is enabled) even if no trap listeners are configured. With the default setting, SNMP trap events are logged if at least one trap listener is configured on the appliance.

Possible values: ENABLED, DISABLED

Default value: DISABLED

partitionNameInTrap

Send partition name as a varbind in traps. By default the partition names are not sent as a varbind.

Possible values: ENABLED, DISABLED

Default value: DISABLED

snmpTrapLoggingLevel

Audit log level of SNMP trap logs. The default value is INFORMATIONAL.

Possible values: EMERGENCY, ALERT, CRITICAL, ERROR, WARNING, NOTICE, INFORMATIONAL, DEBUG

Default value: INFORMATIONAL

unset snmp option

Use this command to remove snmp option settings.Refer to the set snmp option command for meanings of the arguments.

Synopsys

unset snmp option [-snmpset] [-snmpTrapLogging] [-partitionNameInTrap] [-snmpTrapLoggingLevel]

show snmp option

Displays the settings for the following SNMP options: SNMP SET and SNMP trap Logging.

Synopsys

show snmp option

Outputs

snmpset

Accept SNMP SET requests sent to the NetScaler appliance, and allow SNMP managers to write values to MIB objects that are configured for write access.

snmpTrapLogging

Log any SNMP trap events (for SNMP alarms in which logging is enabled) even if no trap listeners are configured. With the default setting, SNMP trap events are logged if at least one trap listener is configured on the appliance.

partitionNameInTrap

Send partition name as a varbind in traps. By default the partition names are not sent as a varbind.

snmpTrapLoggingLevel

Audit log level of SNMP trap logs. The default value is INFORMATIONAL.