This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
配置内联模式
注意:这些说明仅适用于通过版本 7.1 配置向导从恢复出厂设置状态预配的设备。对于已更新到版本 7.1 但未从恢复出厂设置状态重新预配的设备,请参阅版本 7.0 文档。
在版本 7.1 配置向导中执行基本配置。只有在通过桥接的数据上使用 VLAN 中继时,才需要更多的配置。
配置内联模式
- 请勿将桥梁连接到您的流量网络。首先使用配置向导预配设备。
- 如果您的流量不包含标记的 VLAN 流量,请跳到此过程的最后一步。
- 在 配置 > NetScaler > 实例中导航到 NetScaler 实例 ,然后单击 NetScaler 实例的 IP 地址。
- 如果显示 Citrix SD-WAN 连接器 “开始使用” 页面,请忽略该页面。
- 单击配置 > 网络 > VLAN > 添加。
- 在 创建 VLAN” 对话框中,将标记的 VLAN 配置为使用桥接 #1。在 VLAN ID 字段中,输入第一个标记 VLAN 的 VLAN ID(工作表上的 VLAN1.1)。在 接口” 下,清除所有复选框。然后,为桥 的第一个端口(工作表上的 T9)和桥的第二个端口(T10)选择 “活动” 和 “标记。单击创建。
- 使用网桥 #1(VLAN1.2、VLAN1.3 等)对剩余的所有 VLAN 重复上一步。
- 对任何其他桥接对重复此操作。
- 单击关闭。
- 单击 保存 以保存您的配置。
- 将桥梁连接到您的流量网络。配置已完成。
共享
共享
在本文中
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.