Linux Virtual Delivery Agent

Non-vGPU graphics cards

June 21, 2024

Contributed by:

Non-vGPU graphics cards refer to graphics cards that don’t support the NVIDIA virtual GPU (vGPU) solution. This article provides information on using non-vGPU graphics cards.

Prerequisites

To use non-vGPU graphics cards, you must:

Install XDamage as a prerequisite. Typically, XDamage exists as an extension of XServer.
Set CTX_XDL_HDX_3D_PRO to Y when installing the Linux VDA. For information about environment variables, see Step 7: Set up the runtime environment to complete the installation.

Configuration

Modify Xorg configuration files

For NVIDIA graphics cards

If you are using an NVIDIA driver, the configuration files are installed and set automatically.

For other graphics cards

You must modify the four template configuration files installed under /etc/X11/:

ctx-driver_name-1.conf
ctx-driver_name-2.conf
ctx-driver_name-3.conf
ctx-driver_name-4.conf

Using ctx-driver_name-1.conf as an example, do the following to modify the template configuration files:

Replace driver_name with your actual driver name.

For example, if your driver name is intel, you can change the configuration file name to ctx-intel-1.conf.
Add the video driver information.

Each template configuration file contains a section named “Device,” which is commented out. This section describes the video driver information. Enable this section before adding your video driver information. To enable this section:
1. See the guide provided by the card manufacturer for configuration information. A native configuration file can be generated. Verify that your card can work in a local environment with the native configuration file when you are not running a Linux VDA session.
2. Copy the “Device” section of the native configuration file to ctx-driver_name-1.conf.

Run the following command to set the registry key so that the Linux VDA can recognize the configuration file name set in Step 1.

/opt/Citrix/VDA/bin/ctxreg create -k "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix\XDamage" -t "REG_SZ" -v "DriverName" -d "intel" --force
<!--NeedCopy-->

Enable non-vGPU graphics

The non-vGPU graphics feature is disabled by default. You can run the following command to enable it by setting the XDamageEnabled value to 1.

/opt/Citrix/VDA/bin/ctxreg create -k "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix\XDamage" -t "REG_DWORD" -v "XDamageEnabled" -d "0x00000001" --force
<!--NeedCopy-->

Troubleshooting

No or garbled graphic output

If you can run 3D applications locally and all configurations are correct, missing or garbled graphic output is the result of a bug. Use /opt/Citrix/VDA/bin/setlog and set GFX_X11 to verbose to collect the trace information for debugging.

Hardware encoding does not work

This feature supports only software encoding.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Non-vGPU graphics cards

June 21, 2024

Contributed by:

June 21, 2024

Contributed by:

Non-vGPU graphics cards

Prerequisites

Configuration

Modify Xorg configuration files

For NVIDIA graphics cards

For other graphics cards

Enable non-vGPU graphics

Troubleshooting

No or garbled graphic output

Hardware encoding does not work

In this article