Product Documentation

Citrix SD-WAN 210 Standard Edition Appliances

The Citrix SD-WAN 210-SE appliance is a 1U appliance for use in small branch offices. This appliance has 2-core processor with 4 GB memory and 64 gigabytes (GB) of storage.

The Citrix Compliance Regulatory models are:

  • SD-WAN 210-SE (non-LTE) - NS-SDW-210
  • SD-WAN 210-SE LTE - NS-SDW-210-LTE-R1, NS-SDW-210-LTE-R2

For more information, see the Citrix SD-WAN product platform datasheet.

The following figure shows the front panel of the 210 SE appliance.

Note

The 210-SE appliance cannot be configured as an MCN appliance.

localized image

LED Description
Ethernet Copper Ports LED Active/Link: Green
  Speed 1000: Orange
  Speed 100: Green
  Speed 10: off
Bypass LEDs Normal Mode: Green
  Bypass Mode: Orange
Ethernet Fiber Ports Active/Link: Green
  Speed: 1000: Orange
Power LEDs Power on: Green
  Power off: off

localized image

The following components are visible on the back panel of the 210 SE appliance:

Interface Port Labels Type Description
1/1 and 1/2 Bypass/FTW Fail-to-Wire 
  1/3  Traffic  Network traffic
  Management  RJ-45  A copper Ethernet (RJ45) management port. The management port is used to connect directly to the appliance for system administration functions. You can use this port for initial provisioning of Virtual WAN.
1/4 and 1/5 SFP and Ethernet (combination ports) Used as a combination of SFP and Ethernet one each on the top and bottom.
3  USB  USB ports 
4  Console RS-232 serial  An RS232 serial console port.
Reset  Reset button  Consult Citrix technical support for more information.
Power  Power button  Power button to power on or off the appliance. Press the switch for five seconds to switch off the power.
Power Supply DC Power Supply  Single power adapter. Power rating: 40 W, voltage: 12 V, and current: 3.33 A.

Citrix SD-WAN 210-SE LTE

The 210 SE LTE appliance is a 1U appliance. This appliance has 2-core processor with 4 GB memory and 64 gigabytes (GB) of storage.

The following figure shows the front panel of the 210 SE LTE appliance.

Figure 3. 210 SE (LTE) front panel with Antenna

localized image

LED Description
Ethernet Copper Ports LED Active/Link: Green
  Speed: 1000 Orange
  Speed 100: Green
  Speed 10: off
Bypass LEDs Normal Mode: Green
  Bypass Mode: Orange
Ethernet Fiber Ports Active/Link: Green
  Speed: 1000: Orange**
System and Data LEDs Sys: Power on: Green
  Sys: Power off: off
  Data access storage: Blue

Figure 4. 210 SE (LTE) back panel with Antenna

localized image

The following components are visible on the back panel of the 210 SE LTE appliance:

Interface Port Labels Type Description
1/1 and 1/2  Bypass/FTW  FTW ports 
  1/3  Traffic  Traffic port 
  Management RJ-45  A copper Ethernet (RJ45) management port. The management port is used to connect directly to the appliance for system administration functions. You can use this port for initial provisioning of Virtual WAN.
2  1/4 and 1/5  SFP and Ethernet (combination ports) Used as a combination of SFP and Ethernet one each on the top and bottom.
USB  USB ports 
Console  RS-232 serial An RS232 serial console port
Reset  Reset button  Consult Citrix technical support for more information.
Power  Power button  Power button to power on or off the appliance. Press the switch for five seconds to switch off the power.
7  Power supply  DC Power supply  Single power adapter. Power rating: 40 W, voltage: 12 V, and current: 3.33 A.
Antenna connectors  Male connectors  Connectors for antenna 
Two antennas  LTE antennas  Antennas shipped with the appliance.

Citrix SD-WAN 210 Standard Edition Appliances

In this article