Plan your StoreFront deployment
StoreFront employs Microsoft .NET technology running on Microsoft Internet Information Services (IIS) to provide enterprise app stores that aggregate resources and make them available to users. StoreFront integrates with your Citrix Virtual Apps and Desktops deployments, providing users with a single, self-service access point for their desktops and applications.
StoreFront comprises the following core components:
- The authentication service authenticates users to Microsoft Active Directory, ensuring that users do not need to log on again to access their desktops and applications. For more information, see User authentication.
- Stores enumerate and aggregate desktops and applications from Citrix Virtual Apps and Desktops. Users access stores through Citrix Workspace app, Citrix Receiver for Web sites, and XenApp Services URLs. For more information, see User access options.
- The subscription store service records details of users’ application subscriptions and updates their devices to ensure a consistent roaming experience. For more information about enhancing the experience for your users, see Optimize the user experience.
StoreFront can be configured either on a single server or as a multiple server deployment. Multiple server deployments not only provide additional capacity, but also greater availability. The modular architecture of StoreFront ensures that configuration information and details of users’ application subscriptions are stored on and replicated between all the servers in a server group. This means that if a StoreFront server becomes unavailable for any reason, users can continue to access their stores using the remaining servers. Meanwhile, the configuration and subscription data on the failed server are automatically updated when it reconnects to the server group. Subscription data is updated when the server comes back online but you must propagate configuration changes if any were missed by the server while offline. In the event of a hardware failure that requires replacement of the server, you can install StoreFront on a new server and add it to the existing server group. The new server is automatically configured and updated with users’ application subscriptions when it joins the server group.
The figure shows a typical StoreFront deployment.
For multiple server deployments, external load balancing through, for example, Citrix ADC or Windows Network Load Balancing is required. Configure the load balancing environment for failover between servers to provide a fault-tolerant deployment. For more information about load balancing with Citrix ADC , see Load Balancing. For more information about Windows Network Load Balancing, see https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/hh831698(v=ws.11).
Active load balancing of requests sent from StoreFront to Citrix Virtual Desktops sites and Citrix Virtual Apps farms is recommended for deployments with thousands of users or where high loads occur, such as when a large number of users log on over a short period of time. Use a load balancer with built-in XML monitors and session persistency, such as Citrix ADC .
If you deploy SSL-terminating load balancer or if you need to troubleshoot, you can use the PowerShell cmdlet Set-STFWebReceiverCommunication.
Set-STFWebReceiverCommunication [-WebReceiverService] <WebReceiverService> [[-Loopback] <On | Off | OnUsingHttp>] [[-LoopbackPortUsingHttp] <Int32>]
The valid values are:
- On - This is the default value for new Citrix Receiver for Web sites. Citrix Receiver for Web uses the schema (HTTPS or HTTP) and port number from the base URL but replaces the host with the loopback IP address to communicate with StoreFront Services. This works for single server deployments and deployments with a non SSL-terminating load balancer.
- OnUsingHttp - Citrix Receiver for Web uses HTTP and the loopback IP address to communicate with StoreFront Services. If you are using an SSL-terminating load balancer, select this value. You must also specify the HTTP port if it is not the default port 80.
- Off - This turns off loopback and Citrix Receiver for Web uses the StoreFront base URL to communicate with StoreFront Services. If you perform an in-place upgrade, this is the default value to avoid disruption to your existing deployment.
For example, if you are using an SSL-terminating load balancer, your IIS is configured to use port 81 for HTTP and the path of your Citrix Receiver for Web site is /Citrix/StoreWeb, you can run the following command to configure the Citrix Receiver for Web site:
$wr = Get-STFWebReceiverService -VirtualPath /Citrix/StoreWeb Set-STFWebReceiverCommunication -WebReceiverService $wr -Loopback OnUsingHttp -LoopbackPortUsingHttp 81
Switch off loopback to use any web proxy tool like Fiddler to capture the network traffic between Citrix Receiver for Web and StoreFront Services.
Active Directory considerations
For single server deployments you can install StoreFront on a non-domain-joined server (but certain functionality will be unavailable); otherwise, StoreFront servers must reside either within the Active Directory domain containing your users’ accounts or within a domain that has a trust relationship with the user accounts domain unless you enable delegation of authentication to the Citrix Virtual Apps and Desktops sites or farms. All the StoreFront servers in a group must reside within the same domain.
In a production environment, Citrix recommends using HTTPS to secure communications between StoreFront and users’ devices. To use HTTPS, StoreFront requires that the IIS instance hosting the authentication service and associated stores is configured for HTTPS. In the absence of the appropriate IIS configuration, StoreFront uses HTTP for communications. You can change from HTTP to HTTPS at any time, provided the appropriate IIS configuration is in place.
If you plan to enable access to StoreFront from outside the corporate network, Citrix Gateway is required to provide secure connections for remote users. Deploy Citrix Gateway outside the corporate network, with firewalls separating Citrix Gateway from both the public and internal networks. Ensure that Citrix Gateway is able to access the Active Directory forest containing the StoreFront servers.
Multiple Internet Information Services (IIS) websites
StoreFront enables you to deploy different Stores in different IIS websites per Windows server so that each store can have a different host name and certificate binding. This can be used, for example, to allow multiple Storefront URLs and certificates to bind on the same StoreFront server group.
Start by creating two websites, in addition to the default web site. After creating multiple websites in IIS, use the PowerShell SDK to create a StoreFront deployment in each of those IIS websites. For more information about creating websites in IIS, see How to set up your first IIS Website.
The StoreFront and PowerShell consoles cannot be open at the same time. Always close the StoreFront management console before using the PowerShell console to administer your StoreFront configuration. Likewise, close all instances of PowerShell before opening the StoreFront console.
Example: To create two IIS website deployments—one for applications and one for desktop
Add-STFDeployment -SiteID 1 -HostBaseURL "https://www.storefront.app.com" Add-STFDeployment -SiteID 2 -HostBaseURL "https://www.storefront.desktop.com"
StoreFront disables the management console when it detects multiple sites and displays a message to that effect.
For more information, see Before installing and configuring.
The number of Citrix Workspace app users supported by a StoreFront server group depends on the hardware you use and on the level of user activity. Based on simulated activity where users log on, enumerate 100 published applications, and start one resource, expect a single StoreFront server with the minimum recommended specification of two virtual CPUs running on an underlying dual Intel Xeon L5520 2.27 Ghz processor server to enable up to 30,000 user connections per hour.
Expect a server group with two similarly configured servers in the group to enable up to 60,000 user connections per hour; three nodes up to 90,000 connections per hour; four nodes up to 120,000 connections per hour; five nodes up to 150,000 connections per hour; six nodes up to 175,000 connections per hour.
The throughput of a single StoreFront server can also be increased by assigning more virtual CPUs to the system, with four virtual CPUs enabling up to 55,000 user connections per hour and eight virtual CPUs enabling 80,000 connections per hour.
The minimum recommended memory allocation for each server is 4GB. When using Citrix Receiver for Web, assign an additional 700 bytes per resource, per user in addition to the base memory allocation. As with using Citrix Receiver for Web, when using Citrix Workspace app, design environments to allow an extra 700 bytes per resource, per user on top of the base 4 GB memory requirements for this version of StoreFront.
As your usage patterns might be different than those simulated above, your servers might support more or fewer numbers of users connections per hour.
StoreFront server group deployments are only supported where links between servers in a server group have latency of less than 40 ms (with subscriptions disabled) or less than 3 ms (with subscriptions enabled). Ideally, all servers in a server group should reside in the same location (data center, availability zone), but server groups can span locations within the same region provided that links between servers in the group meet these latency criteria. Examples include server groups spanning availability zones within a cloud region, or between metropolitan area data centers. Note that latency between zones varies by cloud provider. Citrix do not recommend spanning locations as a disaster recovery configuration, but it may be suitable for high availability.
StoreFront server groups containing mixtures of operating system versions, or mixtures of operating system languages or locale configurations, are not supported.
Occasionally, network issues or other problems can occur between a StoreFront store and the servers that it contacts, causing delays or failures for users. You can use the timeout settings for a store to tune this behavior. If you specify a short timeout setting, StoreFront quickly abandons a server and tries another one. This is useful if, for example, you have configured multiple servers for failover purposes.
If you specify a longer timeout, StoreFront waits longer for a response from a single server. This is beneficial in environments where network or server reliability is uncertain and delays are common.
Citrix Receiver for Web also has a timeout setting, which controls how long a Citrix Receiver for Web site waits for a response from the store. Set this timeout setting to a value at least as long as the store timeout. A longer timeout setting allows for better fault tolerance, but users might experience long delays. A shorter timeout setting reduces delays for users, but they might experience more failures.
For information about setting timeouts, see Communication time-out duration and server retry attempts and Communication time-out duration and retry attempts.