Scout Command Interface
Add or modify configuration data (Type=4)
This action has the following effect for the OU FQOUName: The value Use parent device configuration is deleted and an independent device configuration is created. For the new device configuration, the configuration data of the next higher instance are copied and their values entered.
Adding or modifying configuration data of an OU requires
- Section [FileInfo] with entry
Type=4 - Section [Setup] with the relevant entries
Section [Setup]
| Entry | Value/Example | Description | Mand. | |
|---|---|---|---|---|
| FQOUName | /OU1/OU2 | Fully-qualified name of the OU for which configuration data are to be modified. To modify values of the base configuration (top level), set a slash: / | ✓ | |
| Network | ||||
| Timeout | <#sec> | Timeout for establishing a connection to the manager | ||
| IdleTimeout | <#sec> | Timeout for existing connection after a specified period of idle time | ||
| Hostname (only individual devices) | myclient | Host name of the device | ||
| NetworkOptions | 1,0 | Send keepalive packets | ||
| HostAddr1 | 192.168.10.22 | Part 1 of a value pair for a host table | ||
| HostName1 | myclient22 | Part 2 of a value pair for a host table | ||
| [NETWORKPROFILE!#] | ||||
| NetworkType | 4, 5, 6 | 4 Ethernet, 5 WLAN, 6 WWAN (Mobile Internet) | ||
| Name | LAN_STec_02 | Network profile name | ||
| DHCPTimeout | <#sec> | Timeout for a DHCP request of the device | ||
| UseLease | true,false | If the DHCP request fails, the client respects an existing lease file. | ||
| Options | 1,0 | Ignore Scout Server DHCP options | ||
| BootMode | DHCP,off | Source of the client network data | ||
| IPAddr | 192.168.10.21 | IP address of the client | ||
| Netmask | 255.255.255.0 | Network mask of the client | ||
| Domain | mycompany.com | Domain name of the client | ||
| NBDomain | DOM01 | Sent as smart card domain to the client | ||
| Dot1x | true,false | Use of IEEE 802.1X for authentication | ||
| Dot1xTimeout | <#sec> | Timeout for IEEE 802.1X authentication | ||
| DnsServer1 | 192.168.10.2 | IP address of 1. DNS server | ||
| Gateway1 | 192.168.10.1 | IP address of 1. gateway | ||
| Media | ethernet,adsl,umts,tokenring,wavelan | Network medium | ||
| Mode | auto | Ethernet | ||
| Speed
|
auto,100HD,100FD,10HD,10FD,1000,BNC,AUI | Network speed for ethernet or adsl | ||
| 4,16,100,auto | Network speed for tokenring | |||
| ESSID | WLAN SSID | |||
| HiddenSSID | true,false | WLAN / determines whether SSID is hidden | ||
| PSK | Unicon-crypted string | WLAN. For encryption, use the Environment Variables feature of the Scout Console, see Encrypting values in the Installation short guide. | ||
| Channel | 1,2,…,14 | WLAN | ||
| WPAMode | WPA,WPA2 | WPA encryption (PSK), WPA2 encryption (PSK) | ||
| APN | string | WWAN (Mobile Internet) | ||
| User | string | WWAN (Mobile Internet) | ||
| Password | Unicon-crypted password | WWAN (Mobile Internet) | ||
| PIN | Unicon-crypted password | WWAN (Mobile Internet) | ||
| Roaming | true,false | WWAN (Mobile Internet) | ||
| Desktop | ||||
| LANG | de_DE | Display language | ||
| ShowTaskbar | true,false | Show Taskbar | ||
| TaskbarAlwaysOnTop | true,false | Taskbar always visible | ||
| TaskbarAutoHide | true,false | Hide taskbar automatically (only for TaskbarAlwaysOnTop=false) | ||
| TaskbarOption | 1843 | Taskbar options as a combination of the following values: 1 QuickConfig keyboard, 2 QuickConfig volume, 4 QuickConfig peripherals, 16 QuickConfig network, 32 QuickConfig display, 64 Show ‘Show desktop’ icon, 256 Show device information, 512 Show date and time, 1024 Show live information icons | ||
| TaskbarShowClock | true,false | Show time on taskbar | ||
| DesktopOption | 771 | The following options and their combinations are provided: 0 Do not show any icons on the desktop, 1 Show only application icons (enabled by default), 2 Show volumes (enabled by default), 4 Show ‘Home’ folder, 8 Show ‘Computer’ folder, 16 Show ‘Trash’ folder, 32 Show ‘Network’ folder, 256 Show Config panel icon (enabled by default), 512 Sort configuration panel (enabled by default) | ||
| Workspace | <#> | Number of workspaces | ||
| NextFocusKey | Down,Tab | Keys to switch between open applications. Down: Switch with CTRL+ALT+↓, Tab: Switch with Alt+Tab | ||
| DesktopBackColor | #FF00FF | Background color. The format is an RGB value: #rrggbb. rr represents the red value, gg the green value, bb the blue value | ||
| DesktopTextColor | #FF00FF | Text color of desktop icons | ||
| BackgroundImage | background_A2.jpg | File name or URL of a background picture / wallpaper (primary monitor) | ||
| BackgroundImage_BeforeLogin | background_A1.jpg | File name or URL of a different wallpaper only shown until AD logon (primary monitor) | ||
| BackgroundImage_NonPrimary | background_B2.jpg | File name or URL of a wallpaper (second and more monitors) | ||
| BackgroundImage_NonPrimary_BeforeLogin | background_B1.jpg | File name or URL of a different wallpaper only shown until AD logon (second and more monitors) | ||
| TaskbarOption | 0x07 | Show applets in quick-setup of the taskbar (eLux® RP 5). No applets: 0x0, MouseKeyboard: 0x1, Multimedia: 0x2, USB: 0x4. The values are OR-linked. | ||
| TimeZone | Berlin GMT+1 | Time zone. All 252 entries available in the console in Configuration > Desktop in the list-field. The name must match with the list-field entry, see examples (without brackets): Europe/London (GMT), Europe/Berlin (GMT+1), Asia/Dubai (GMT+4), US/Pacific (GMT-8), America/Los_Angeles (GMT-8), America/Vancouver (GMT-8), Asia/Yekaterinburg (GMT+5) | ||
| TimeServer1 | Name or IP address of the time server | |||
| Screen | ||||
| ScreenLayout | 1,2,3,4,5,6,7,8 | Number of monitors, is set automatically to the number of defined screens | ||
| AutomaticLayoutAdjustment | true,false | For multiple monitors: after one of the monitors is removed | ||
| [!SCREEN!1] | ||||
| MonitorNumber | ||||
| Resolution | 1024x768 | Screen resolution | ||
| Frequency | 60 | Screen refresh rate | ||
| Rotation | 0,90,180,270 | Monitor rotation in degrees | ||
| LayoutPos | 1,2,3,4,5,6,7,8 | For multiple monitors | ||
| LayoutNext | 2 | For multiple monitors | ||
| Primary | true, false | Primary monitor | ||
| On | true,false | |||
| UseDDC | true, false | Use monitor values via DDC | ||
| ScreenSaverOff | true,false | Legacy power management: Monitor power saving mode | ||
| StandbyTime | <#min> | Legacy power management: Time period after which the monitor’s power saving mode is enabled | ||
| UseScreenSaver | true,false | Legacy power management: Screen saver | ||
| XAutoLockDelay | <#min> | Legacy power management: Time period after which the screen saver is enabled | ||
| Power management | ||||
| LowBatteryLevel | 20 | Battery status in percent, from which the user is notified | ||
| LogOffBeforeSuspend | 0, 1 | |||
| [POWERPROFILE_X] | ||||
| PowermanagementProfileType | 0,1,2,3,4 | POWERPROFILE_AUTO, POWERPROFILE_ECO, POWERPROFILE_PERFORMANCE, POWERPROFILE_ECO-WORKING, POWERPROFILE_PERFORMANCE-WORKING | ||
| BrightnessLevel | 80 | Screen brightness in percent | ||
| DisplayOffTimerEnabled | true,false | Turn off display | ||
| DisplayOffTimer | 2 | Delay in minutes | ||
| DisplayLockTimerEnabled | true or false | Enable screen saver | ||
| DisplayLockTimer | 2 | Delay in minutes | ||
| IdleTimerEnabled | true or false | Device in idle state | ||
| IdleTimer | 10 | Delay in minutes | ||
| IdleAction | 2, 3 | Action when device is in idle state | ||
| NoLoginIdleTimerEnabled | true or false | |||
| NoLoginIdleTimer | 10 | Delay in minutes | ||
| NoLoginIdleAction | 2 or 3 | |||
| LidCloseAction | 0, 1, 2, or 3 | Action when user closes the lid. 0 No action, 1 Turn display off, 2 Shut down, 3 Suspend | ||
| PowerButtonAction | 0, 1, 2, or 3 | Action when users press the power button | ||
| SleepButtonAction | 0, 2, or 3 | Action when users press the keyboard Power/Sleep key | ||
| Mouse/Keyboard | ||||
| XkbLayout | de | Keyboard language | ||
| LeftHandMouse | Swap left- and right-hand mouse button | |||
| multiClickTime | 500 | Double-click speed | ||
| Numlock | on or off | Initial Num Lock state | ||
| DontVTSwitch | true or false | Allows switching consoles with Ctrl-Alt-F1…F12 | ||
| DeadKeys | on or off | Dead keys | ||
| PointerSpeed | Mouse pointer speed | |||
| KeyboardDelay | Keyboard delay | |||
| KeyboardSpeed | Key repetition rate | |||
| Firmware | ||||
| ftphost | IP address of web server for firmware updates | |||
| ftpport | Is only used if port is not specified for ftphost | |||
| UseSSL | true or false | Use secure protocol for web server (HTTPS/FTPS) | ||
| ftphostname | Host name of web server for firmware updates (optional) | |||
| ftppath | Container path on the web server | |||
| user | Username to access the eLux software container of the FTP server | |||
| password | Password to access the eLux software container of the FTP server | |||
| idf | myimage.idf | Name of the image definition file | ||
| ProxyType | 0, 1, 2, or 3 | None, Static (Consumer), Static (Provider), Dynamic | ||
| ProxyServer | IP address of proxy server for firmware updates | |||
| ProxyServerName | IP name of proxy server for firmware updates | |||
| ProxyServerPort | Add proxy server port to ProxyServer or ProxyServerName | |||
| AutoCheckUpdate | true or false | Determines whether the client checks for new versions on start | ||
| CheckUpdateOnShutdown | true or false | Determines whether the client checks for new versions on shutdown | ||
| ConfirmUpdate | true or false | Determines whether the user must confirm a firmware update | ||
| Security | ||||
| LocalPassword | Device password for all devices, can only be changed in the base configuration. | |||
| LockControlPanel | true or false | Only eLux RP 5 | ||
| Mirror | true or false | Determines if the mirror server is started | ||
| MirrorViewOnly | true or false | Read-only access | ||
| MirrorDialog | true or false | User must confirm a mirror session | ||
| MirrorPassword | Password for mirror session | |||
| AuthType | Type of user authentication. 0 No, 3 AD, 5 AD+Smartcard, 10 Evidian | |||
| AuthShowLastUser | 0 | Show last username | ||
| AuthDomainFieldStatus | 0 | Display domain field on client | ||
| AuthDisplayNames | domain1>,<domain2 | To define AD domain entries, first define their display names. Separate multiple entries by comma. | ||
| [Authserver_domain1] | In a second step, specify the details for each domain. | |||
| DisplayName | Domain 1 | |||
| AuthServer | AD server for domain 1 | |||
| AuthBase | AD base for domain 1 | |||
| AuthVersion | ||||
| AllowScUserAuth | true or false | If smart card is enabled, allow to alternatively authenticate via username+password. | ||
| SCUserAuthAsDefault | true or false | |||
| Check | none, forever, or boot | No smart card check, smart card must always be available, on device start | ||
| UseSmartcard (only Evidian) | true or false | |||
| Secret (only Evidian) | Secret as defined in Enterprise Access Manager | See string value in HKEY_LOCAL_MACHINESOFTWAREEnatelWiseGuardFrameWorkAuthentication > ExternalRoamingSessionSecret | ||
| LockedFields | Bit string for the fields to be locked on the client | |||
| XAutoLockPwd | If you set $ELUXPASSWORD, the AD authentication password is used. Otherwise the field must remain empty. | |||
| Multimedia | ||||
| MasterVolume | 49 | Output volume | ||
| MicVolume | 80 | Input volume | ||
| MicMute | true | Microphone mute | ||
| Drives / common settings | ||||
| [!NETDRIVE!#] | ||||
| Directory | Defines which directory is used to access the data | |||
| Server | server name | Server on which the network drive is shared | ||
| User | User for authentication on the server | |||
| Password | Password for authentication on the server | |||
| Share | servershare | Name of the share directory on the server | ||
| UseKerberos | true or false | Determines whether authentication is performed using a certificate (only for AD authentication) | ||
| Printer / common settings | ||||
| LpdService | true or false | Determines whether the LPD service is started on the client | ||
| LprTimeout | 10 | Timeout after which an LPR print is aborted | ||
| port_usb | 9101 | Port number for USB printing | ||
| port_lp | 9100 | Port number for LP printing | ||
| [!PRINTER!#] | ||||
| Name | PR-Lexmark | |||
| Type | net,par, ser, or usb | Network printer, Printer on parallel port, Printer on serial port, Printer on USB port | ||
| Address | printer1.my.org | Only for network printer (mandatory): Network address | ||
| Queue | queue1 | Only for network printer (mandatory): Name of the printer queue | ||
| TpClass | Name of the ThinPrint class | |||
| Default | true or false | Sets the printer as default printer | ||
| Com | 0 | Number of the COM interface on which the print is made. Always 0 | ||
| Baud | 0, 1200, 2400, 4800, 9600, 19200, or 38400 | Bit rate. If you set 0, the value from the system settings (Hardware) is used. | ||
| TextFilter | true or false | Determines whether a text filter is applied | ||
| PclFilter | true or false | Determines whether a PCL filter is applied | ||
| Driver | Driver name for the printer | |||
| Tp | true or false | Defines the printer as a ThinPrint printer | ||
| Hardware | ||||
| Device | none, intern, extern, or usb | Type of smart card device | ||
| USB | true or false | Determines whether USB storage devices may be used | ||
| USBUserInfo | true or false | Determines whether the user is notified about USB storage devices when they are inserted or removed | ||
| [Com#Settings] | COM port settings. # 1-4 | |||
| Speed | 1200,2400,4800,9600,19200,38400,57600, or 115200 | |||
| Parity | none, even, or odd | |||
| FlowControl | none,rtscts,xonxoff, or both | |||
| BitWidth | 5, 6, 7, or 8 | |||
| StopBits | 1 or 2 | |||
| Diagnose | ||||
| LogLevel | 1 or 6 | Enhanced logging off or on | ||
| DiagURL | ftp://ftpserver.de | Destination address for diagnostic files | ||
Add or modify configuration data (Type=4)
In this article
Copied!
Failed!