Citrix ADC

Provision the Citrix ADC VPX instance by using OpenStack

You can provision a Citrix ADC VPX instance in an OpenStack environment either by using the Nova boot command (OpenStack CLI) or Horizon (OpenStack dashboard) .

Provisioning a VPX instance, optionally involves using data from the config drive. Config drive is a special configuration drive that attaches to the instance as a CD-ROM device when it boots. This configuration drive can be used to pass networking configuration such as management IP address, network mask, default gateway, and to inject customer scripts.

In a Citrix ADC appliance, the default authentication mechanism is password based. Now, the SSH key-pair authentication mechanism is supported for Citrix ADC VPX instances on the OpenStack environment.

The key-pair (public key and private key) is generated before using the Public Key Cryptography mechanism. You can use different mechanisms, such as Horizon, Puttygen.exe for Windows, and ssh-keygen for the Linux environment, to generate the key pair. Refer to online documentation of respective mechanisms for more information about generating key pair.

Once a key pair is available, copy the private key to a secure location to which authorized persons have access. In OpenStack, public key can be deployed on a VPX instance by using the Horizon or Nova boot command. When a VPX instance is provisioned by using OpenStack, it first detects that the instance is booting in an OpenStack environment by reading a specific BIOS string. This string is “OpenStack Foundation” and for Red Hat Linux distributions it is stored in /etc/nova/release. This is a standard mechanism that is available in all OpenStack implementations based on the KVM hypervisor platform. The drive must have a specific OpenStack label.

If the config drive is detected, the instance attempts to read the network configuration, custom scripts, and SSH key pair if provided.

User data file

The Citrix ADC VPX instance uses a customized OVF file, also known as the user data file, to inject network configuration, custom scripts. This file is provided as part of config drive. Here is an example of a customized OVF file.

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Environment xmlns:oe=""
<Property oe:key="com.citrix.netscaler.ovf.version" oe:value="1.0"/>
<Property oe:key="com.citrix.netscaler.platform" oe:value="NSVPX"/>
<Property oe:key="com.citrix.netscaler.orch_env" oe:value="openstack-orch-env"/>
<Property oe:key="com.citrix.netscaler.mgmt.ip" oe:value=""/>
<Property oe:key="com.citrix.netscaler.mgmt.netmask" oe:value=""/>
<Property oe:key="com.citrix.netscaler.mgmt.gateway" oe:value=""/>
     <ScriptSettingSection xmlns="" xmlns:i="">
                 <Parameter>X Y</Parameter>
                        echo "Hi, how are you" $1 $2 >> /var/sample.txt
 my $name = "VPX";
 print "Hello, World $name !\n" ;
                 add vlan 33
 bind vlan 33 -ifnum 1/2

In the OVF file preceding “PropertySection” is used for NetScaler networking configuration while <cs:ScriptSection> is used to enclose all scripts. <Scripts></Scripts> tags are used to bundle all scripts together. Each script is defined in between <Script> </Script> tags. Each script tag has following fields/tags:

a) <Type>: Specifies value for script type. Possible values: Shell/Perl/Python/NSLCI (for NetScaler CLI scripts)

b) <Parameter>: Provides parameters to the script. Each script can have multiple <Parameter> tags.

c) <BootScript>: Specifies script execution point. Possible values for this tag: before/after. “before” specifies script is run before PE comes up. “after” specifies that the script will be run after PE comes up.

d) <Text>: Pastes content of a script.


Currently the VPX instance does not take care of sanitization of scripts. As an administrator, you must check the validity of the script.

Not all sections need to be present. Use an empty “PropertySection” to only define scripts to run on first boot or an empty <cs:ScriptSection> to only define networking configuration.

After the required sections of the OVF file (user data file) are populated, use that file to provision the VPX instance.

Network configuration

As part of the network configuration, the VPX instance reads:

  • Management IP address
  • Network mask
  • Default gateway

After the parameters are successfully read, they are populated in the NetScaler configuration, to allow managing the instance remotely. If the parameters are not read successfully or the config drive is not available, the instance transitions to the default behavior, which is:

  • The instance attempts to retrieve the IP address information from DHCP.
  • If DHCP fails or times-out, the instance comes up with the default network configuration (

Customer script

The VPX instance allows to run a custom script during initial provisioning. The appliance supports script of type Shell, Perl, Python, and Citrix ADC CLI commands.

SSH key pair authentication

The VPX instance copies public key, available within the configuration drive as part of instance meta data, into its “authorized_keys” file. This allows the user to access the instance with private key.


When an SSH key is provided, the default credentials (nsroot/nsroot) no longer work, if password-based access is needed, log on with the respective SSH private key and manually set a password.

Before you begin

Before you provision a VPX instance on OpenStack environment, extract the .qcow2 file from the .tgz file and build

An OpenStack image from the qcow2 image. Follow these steps:

  1. Extract the .qcow2 file from the .tqz file by typing the following command

    tar xvzf <TAR file>
    tar xvzf <NSVPX-KVM-12.0-26.2_nc.tgz>
  2. Build an OpenStack image using the .qcoz2 file extracted in step 1 by typing the following command.

    openstack image create --container-format bare --property hw_disk_bus=ide --disk-format qcow2 --file <path to qcow2 file> --public <name of the OpenStack image>
    glance image-create --name="NS-VPX-12-0-26-2" --property hw_disk_bus=ide --ispublic=
    true --container-format=bare --disk-format=qcow2< NSVPX-KVM-12.0-26.2_nc.qcow2

    Figure 1: The following illustration provides a sample output for the glance image-create command.

    Image create command OpenStack

Provisioning the VPX instance

You can provision a VPX instance in two ways by using one of the options:

  • Horizon (OpenStack dashboard)
  • Nova boot command (OpenStack CLI)

Provision a VPX instance by using the OpenStack dashboard

Follow these steps to provision the VPX instance by using Horizon:

  1. Log on to the OpenStack dashboard.
  2. In the Project panel on the left hand side of the dashboard, select Instances.
  3. In the Instances panel, click Launch Instance to open the Instance Launching wizard.

    Instance launching wizard

  4. In the Launch Instance wizard, fill in the details, like:

    1. Instance Name
    2. Instance Flavor
    3. Instance Count
    4. Instance Boot Source
    5. Image Name

    Launch wizard details

  5. Deploy a new key pair or an existing key pair through Horizon by completing the following steps:

    a) If you don’t have an existing key pair, create the key by using any existing mechanisms. If you’ve an existing key, skip this step.

    b) Copy the content of public key.

    c) Go to Horizon > Instances > Create New Instances.

    d) Click Access & Security.

    e) Click the + sign next to the Key Pair drop-down menu and provide values for shown parameters.

    f) Paste public key content in Public key box, give a name to the key and click Import Key Pair.

    Import keypair OpenStack

  6. Click the Post Creation tab in the wizard. In Customization Script, add the content of the user data file. The user data file contains the IP address, Netmask and Gateway details, and customer scripts of the VPX instance.

  7. After a key pair is selected or imported, check config-drive option and click Launch.

    Launch instance

Provision the VPX instance by using OpenStack CLI

Follow these steps to provision a VPX instance by using OpenStack CLI.

  1. To create an image from qcow2, type the following command:

    openstack image create --container-format bare --property hw_disk_bus=ide --diskformat qcow2 --file NSVPX-OpenStack.qcow2 --public VPX-ToT-Image

  2. To select an image for creating an instance, type the following command:

    openstack image list | more

  3. To create an instance of a particular flavor, type the following command to choose a flavor ID/Name of from a list:

    openstack flavor list

  4. To attach a NIC to a particular network, type the following command to choose a network ID from a network list:

    openstack network list

  5. To create an instance, type the following command:

    openstack server create --flavor FLAVOR_ID --image IMAGE_ID --key-name KEY_NAME
    --user-data USER_DATA_FILE_PATH --config-drive True --nic net-id=net-uuid
    openstack server create --image VPX-ToT-Image --flavor m1.medium --user-data
    ovf.xml --config-drive True --nic net-id=2734911b-ee2b-48d0-a1b6-3efd44b761b9

Figure 2: The following illustration provides a sample output.

OpenStack Provide CLI

Provision the Citrix ADC VPX instance by using OpenStack