This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
コマンド
このセクションでは、vSwitch ControllerのCLIコマンドについて説明します。内のController VMのテキストコンソールから、ローカルでCLIにアクセスできます。リモートでCLIにアクセスするには、SSHクライアントアプリケーションを使用し、ポート22でController VMのホスト名またはIPアドレスに接続します。
注:
vSwitch Controllerは 8.1で廃止され、今後のリリースから削除されます。
CLIセッション中に、以下のいずれかの方法でCLIコマンドのヘルプを表示できます:
-
「help」と入力してからEnterキーを押します。
-
コマンドの一部に続けて、スペースと疑問符(?)を入力してからEnterキーを押します。
このインターフェイスでは、コマンド引数をTabキーで終了できます。通常、コマンドを各レベルで最も短い一意の文字列に短縮することで入力文字数を減らすことができます。矢印キーを押すと、現在のセッション内のコマンド履歴にアクセスできます。
ライフサイクルコマンド
vSwitch Controllerを停止するには
halt controller
<!--NeedCopy-->
このコマンドでControllerを正常にシャットダウンすることにより、vSwitch Controllerアプライアンスを停止します。
Controllerを再起動するには
restart controller appliance
<!--NeedCopy-->
このコマンドにより、Controllerアプライアンス全体をシャットダウンして再起動します。
このコマンドは、主にトラブルシューティング用です。通常、 halt
コマンドはControllerアプライアンスの電源をオフにするために使用されます。
Controllerデーモンを再起動するには
restart controller daemon
<!--NeedCopy-->
このコマンドにより、Controller機能を実装するプロセスをシャットダウンして再起動します。
このコマンドは、主にトラブルシューティング用です。
設定コマンド
vSwitch Controllerを設定するには、次のコマンドを使用します。
Controllerアプライアンスのホスト名を設定するには
set controller hostname hostname
<!--NeedCopy-->
このコマンドにより、Controllerアプライアンスのホスト名を設定します。
指定のホスト名に1つまたは複数のピリオド文字(.)が含まれている場合、アプライアンスのホスト名は最初のピリオドの前の文字列に設定されます。アプライアンスのドメイン名は、最初のピリオドの後の文字列に設定されます。
DHCP経由でController管理インターフェイスのIPアドレスを設定するには
set controller management-interface config dhcp
<!--NeedCopy-->
このコマンドにより、Controller管理インターフェイスのIPアドレスがDHCPで設定されるようになります。DHCPが構成されている場合、リソースプールはフェールセーフモードに設定できません。
このコマンドは実行時に有効になるため、アドレスが変更されるとCLIへのリモートアクセスが失われる場合があります。
Controller管理インターフェイスの静的IPアドレスを設定するには
set controller management-interface config static
IP-address
netmask
gateway-IP
[dns-server-IP]
[dns-server-IP2
dns-search]]`
<!--NeedCopy-->
このコマンドにより、Controller管理インターフェイスの静的IPアドレスを設定します。DNS構成情報はオプションです。DNS検索パスを指定するには、2つのDNSサーバーを指定する必要があります。
このコマンドは実行時に有効になるため、アドレスが変更されるとCLIへのリモートアクセスが失われる場合があります。
表示コマンド
現在のvSwitch Cntroller設定に関する情報を表示するには、次のコマンドを使用します。
現在のControllerのホスト名を表示するには
show controller hostname
<!--NeedCopy-->
現在の構成の概要と管理インターフェイスのステータスを表示するには
show controller management-interface
<!--NeedCopy-->
管理インターフェイスの構成値を表示するには
show controller management-interface config
<!--NeedCopy-->
Controllerの現在のデフォルトゲートウェイを表示するには
show controller management-interface default-gateway
<!--NeedCopy-->
Controllerの現在のDNS構成を表示するには
show controller management-interface dns-server
<!--NeedCopy-->
Controller管理インターフェイスの現在のIPアドレスを表示するには
show controller management-interface ip-address
<!--NeedCopy-->
Controller管理インターフェイスの現在のネットマスクを表示するには
show controller management-interface netmask
<!--NeedCopy-->
Controllerのソフトウェアバージョンを表示するには
show controller version
<!--NeedCopy-->
その他のコマンド
現在のCLIセッションを終了するには
exit
<!--NeedCopy-->
コマンドに関する情報を取得するには
help
<!--NeedCopy-->
Controllerの既存のバージョンをアップグレードまたはダウングレードするには
install controller software-update scp-format-remote-filename
<!--NeedCopy-->
このコマンドにより、指定したリモートの場所からControllerの更新ファイルを安全にコピーし、既存のバージョンの代わりにそのバージョンをインストールします。
このコマンドを使用して、アップグレードとダウングレードの両方のソフトウェアバージョンをインストールできます。アップグレードにより、構成が自動的に新しいバージョンに移行されます。ダウングレードにより、互換性のあるスナップショットが存在しない場合は、互換性のある最新の構成スナップショットまたは空の構成に戻ります。
指定したリモートシステムをpingするには
ping name-or-IP-address [count]
<!--NeedCopy-->
このコマンドにより、名前またはIPアドレスで識別されるリモートシステムにICMPエコー要求を送信し、応答を待ちます。回数が指定されていない場合、Ctrl+Cキーで中断されるまで、1秒に1回要求が送信されます。回数が指定されている場合、その数のpingが送信されます。
共有
共有
この記事の概要
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.