Manage setup configuration after installation
The Setup configuration menu option can be used to manage various configuration inputs provided during the onboarding.
Warning:
Changing the configuration values can be disruptive. Since this configuration is referenced by multiple components, changes may necessitate re-configuration in dependent components to avoid service interruptions.
The following table summarizes the additional actions needed if any configuration is changed.
| Config name | Action needed | Description |
|---|---|---|
| Step1 | ||
| Google Customer ID | Reconfigure and re-analyze NetScaler by downloading the script again. | Google services are automatically reconfigured. |
| Secure Private Access Gateway URL
|
Reconfigure and re-analyze NetScaler by downloading the script again.
|
Google services are automatically reconfigured. |
| Note If CEP config is skipped, this setting is part of Step2. | ||
| Google Workspace user groups | No manual action needed | New user groups are auto configured on required Google services when settings are saved. |
| Step2 | ||
| NetScaler Gateway virtual server name | Rerun the NetScaler Analyzer only | Use the analyze option when running the NetScaler script.
|
| Secure Private Access site URL
|
Reconfigure StoreFront with the new Secure Private Access address. | |
| Re-analyze StoreFront by downloading scripts again | ||
| Reconfigure and re-analyze NetScaler by downloading the script again. | ||
| Internal IP address (for Secure Private Access Gateway URL) | Reconfigure and analyze NetScaler by downloading the script again. | |
| Certificate-key pair name | Reconfigure and re-analyze NetScaler by downloading the script again. | |
Manage setup configuration after installation
In this article
Copied!
Failed!