Create Linux VDAs using Machine Creation Services (MCS)

You can create domain-joined and non-domain-joined VDAs using MCS. If you want to create non-domain-joined Linux VDAs in Citrix DaaS, you can also refer to the dedicated article Create non-domain-joined Linux VDAs using MCS.

Supported distributions

• Citrix uses the following Centrify versions for initial feature validation on the relevant Linux distributions:

  Linux distribution	Centrify version
  RHEL	5.8.0
  SUSE	5.7.1
  Debian, Ubuntu	5.6.1

  Using other versions of Centrify might cause errors. Do not use Centrify to join a template machine to a domain.

• If you are using PBIS or Centrify for joining MCS-created machines to Windows domains, complete the following tasks:

  • On the template machine, configure the PBIS or Centrify package download path in the /etc/xdl/mcs/mcs.conf file or install the PBIS or Centrify package directly.

  • Before you run /opt/Citrix/VDA/sbin/deploymcs.sh, create an Organizational Unit (OU) that has write and password reset permissions to all its subordinate, MCS-created machines.

  • Before you restart MCS-created machines after /opt/Citrix/VDA/sbin/deploymcs.sh finishes running, run klist -li 0x3e4 purge on your Delivery Controller or on your Citrix Cloud Connector based on your deployment.

Supported hypervisors

• AWS
• Citrix Hypervisor
• GCP
• Microsoft Azure
• Nutanix AHV
• VMware vSphere

Unexpected results can occur if you try to prepare a master image on hypervisors other than the supported ones.

Use MCS to create Linux VMs

Considerations

• Starting with the 2203 release, you can host the Linux VDA on Microsoft Azure, AWS, and GCP for Citrix Virtual Apps and Desktops as well as Citrix DaaS (formerly Citrix Virtual Apps and Desktops service). To add these public cloud host connections to your Citrix Virtual Apps and Desktops deployment, you need Citrix Universal Subscription or Hybrid Rights licenses. For information about Universal Subscription and Hybrid Rights licenses, see Transition and Trade Up (TTU) with Citrix Universal Subscription.

• Bare metal servers are not supported for use with MCS to create virtual machines.

(For Nutanix only) Step 1: Install and register the Nutanix AHV plug-in

Obtain the Nutanix AHV plug-in package from Nutanix. Install and register the plug-in in your Citrix Virtual Apps and Desktops environment. For more information, see the Nutanix Acropolis MCS plug-in installation guide, available at the Nutanix Support Portal.

Step 1a: Install and register the Nutanix AHV plug-in for on-premises Delivery Controllers

After you install Citrix Virtual Apps and Desktops, select and install the XD MCS AHV Plugin on your Delivery Controllers.

Step 1b: Install and register the Nutanix AHV plug-in for cloud Delivery Controllers

Select and install the CWA MCS AHV Plugin for Citrix Cloud Connectors. Install the plug-in on all Citrix Cloud Connectors that are registered with the Citrix Cloud tenant. You must register Citrix Cloud Connectors even when they serve a resource location without the AHV.

Step 1c: Complete the following steps after installing the plug-in

• Verify that a Nutanix Acropolis folder has been created in C:\Program Files\Common Files\Citrix\HCLPlugins\CitrixMachineCreation\v1.0.0.0.
• Run the "C:\Program Files\Common Files\Citrix\HCLPlugins\RegisterPlugins.exe" -PluginsRoot "C:\Program Files\Common Files\Citrix\HCLPlugins\CitrixMachineCreation\v1.0.0.0" command.

• Restart the Citrix Host, Citrix Broker, and Citrix Machine Creation Services on your on-premises Delivery Controllers or restart the Citrix RemoteHCLServer Service on Citrix Cloud Connectors.

  Tip:

  We recommend that you stop and then restart the Citrix Host, Citrix Broker, and Machine Creation Services when you install or update the Nutanix AHV plug-in.

Step 2: Create a host connection

This section gives examples on how to create a host connection to Azure, AWS, Citrix Hypervisor, GCP, Nutanix AHV, and VMware vSphere. For more information, see Create and manage connections and resourcesin the Citrix Virtual Apps and Desktops documentation and Create and manage connections in the Citrix DaaS documentation.

• Create a host connection to Azure in Citrix Studio

• Create a host connection to AWS in Citrix Studio

• Create a host connection to Citrix Hypervisor in Citrix Studio

• Create a host connection to GCP in Citrix Studio

• Create a host connection to Nutanix in Citrix Studio

• Create a host connection to VMware in Citrix Studio

Create a host connection to Azure in Citrix Studio

1. Sign in to Citrix Cloud.
2. In the upper left menu, select My Services > DaaS.
3. From Manage > Full Configuration, select Hosting in the left pane.

4. Select Add Connection and Resources in the action bar.

   

5. Select Microsoft Azure as the connection type.

6. The wizard guides you through pages. Specific page content depends on the selected connection type. After completing each page, select Next until you reach the Summary page. For more information, see Step 2: Create a host connection in the Create non-domain-joined Linux VDAs article.

Create a host connection to AWS in Citrix Studio

1. In Citrix Studio on Citrix Cloud, choose Configuration > Hosting > Add Connection and Resources.

2. Choose Amazon EC2 as the connection type.

   

3. Type the API key and secret key of your AWS account and type your connection name.

   

   The API key is your access key ID and the Secret key is your secret access key. They are considered as an access key pair. If you lose your secret access key, you can delete the access key and create another one. To create an access key, do the following:

   1. Sign in to the AWS services.
   2. Navigate to the Identity and Access Management (IAM) console.
   3. On the left navigation pane, choose Users.
   4. Select the target user and scroll down to select the Security credentials tab.
   5. Scroll down and click Create access key. A new window appears.
   6. Click Download .csv file and save the access key to a secure location.

Create a host connection to Citrix Hypervisor in Citrix Studio

1. Sign in to Citrix Cloud.
2. In the upper left menu, select My Services > DaaS.
3. From Manage > Full Configuration, select Hosting in the left pane.
4. Select Add Connection and Resources in the action bar.
5. Select Citrix Hypervisor as the connection type.
6. Type the connection address (the Citrix Hypervisor URL) of your Citrix Hypervisor account, your user name and password, and your connection name.

Create a host connection to GCP in Citrix Studio

Set up your GCP environment according to Google Cloud Platform virtualization environments and then complete the following steps to create a host connection to GCP.

1. Sign in to Citrix Cloud.
2. In the upper left menu, select My Services > DaaS.
3. From Manage > Full Configuration, select Hosting in the left pane.
4. Select Add Connection and Resources in the action bar.

5. Select Google Cloud Platform as the connection type.

6. Import the service account key of your GCP account and type your connection name.

7. The wizard guides you through pages. Specific page content depends on the selected connection type. After completing each page, select Next until you reach the Summary page. For more information, see Step 2: Create a host connection in the Create non-domain-joined Linux VDAs article.

Create a host connection to Nutanix in Citrix Studio

1. For on-premises Delivery Controllers, choose Configuration > Hosting > Add Connection and Resources in the on-premises Citrix Studio. For cloud Delivery Controllers, choose Manage > Hosting > Add Connection and Resources in the web-based Studio console on Citrix Cloud to create a connection to the Nutanix hypervisor.

2. In the Add Connection and Resources wizard, select Nutanix AHV as the connection type on the Connection page, and then specify the hypervisor address, credentials, and your connection name. On the Network page, select a network for the hosting unit.

   For example, in the on-premises Citrix Studio:

   

Create a host connection to VMware in Citrix Studio

1. Install vCenter Server in the vSphere environment. For more information, see VMware vSphere.

2. In Citrix Studio, choose Configuration > Hosting > Add Connection and Resources to create a connection to VMware vSphere.

   

3. Choose VMware vSphere as the connection type.

   

4. Type the connection address (the vCenter Server URL) of your VMware account, your user name and password, and your connection name.

   

   A new connection appears in the hosting pane.

   

Step 3: Prepare a master image

(For Citrix Hypervisor only) Step 3a: Install Citrix VM Tools

Install Citrix VM Tools on the template VM for each VM to use the xe CLI or XenCenter. VM performance can be slow unless you install the tools. Without the tools, you can’t do any of the following:

• Cleanly shut down, restart, or suspend a VM.
• View the VM performance data in XenCenter.
• Migrate a running VM (through XenMotion).
• Create snapshots or snapshots with memory (checkpoints), and revert to snapshots.
• Adjust the number of vCPUs on a running Linux VM.

1. Run the following command to mount Citrix VM Tools named guest-tools.iso.

   sudo mount /dev/cdrom /mnt
   <!--NeedCopy-->
   

2. Run the following command to install the xe-guest-utilities package based on your Linux distribution.

   For RHEL/CentOS/Rocky Linux:

   sudo rpm -i /mnt/Linux/xe-guest-utilities_{package-version}_all.rpm
   <!--NeedCopy-->
   

   For Ubuntu/Debian:

   sudo dpkg -i /mnt/Linux/xe-guest-utilities_{package-version}_all.deb
   <!--NeedCopy-->
   

   For SUSE:

   sudo rpm -i /mnt/Linux/xe-guest-utilities_{package-version}_all.rpm
   <!--NeedCopy-->
   

3. Check the virtualization state of the template VM on the General tab in XenCenter. If Citrix VM Tools are installed correctly, the virtualization state is Optimized.

(For Azure, AWS, and GCP) Step 3b: Configure cloud-init for Ubuntu 18.04

1. To ensure that a VDA host name persists when a VM is restarted or stopped, run the following command:

   echo "preserve_hostname: true" > /etc/cloud/cloud.cfg.d/99_hostname.cfg
   <!--NeedCopy-->
   

   Verify that the following lines are present under the system_info section in the /etc/cloud/cloud.cfg file:

   system_info:
      network:
          renderers: ['netplan', 'eni', 'sysconfig']
   <!--NeedCopy-->
   

2. To use SSH for remotely accessing MCS-created VMs on AWS, enable password authentication because no key name is attached to those VMs. Do the following as needed.

   • Edit the cloud-init configuration file, /etc/cloud/cloud.cfg. Ensure that the ssh_pwauth: true line is present. Remove or comment the set-password line and the following lines if they exist.

      users:
      - default
      <!--NeedCopy-->
     

   • If you plan to use the default user ec2-user or ubuntu created by cloud-init, you can change the user password by using the passwd command. Keep the new password in mind for later use to log in to the MCS-created VMs.

   • Edit the /etc/ssh/sshd_config file to ensure that the following line is present:

      PasswordAuthentication yes
      <!--NeedCopy-->
     

     Save the file and run the sudo systemctl sshd restart command.

Step 3c: Install .NET and the Linux VDA package on the template VM

Note:

To use a currently running VDA as the template VM, skip this step.

Install .NET Runtime 6.0 on the template VM and then run the following commands based on your Linux distribution to install the Linux VDA:

For RHEL/CentOS/Rocky Linux:

sudo yum –y localinstall <PATH>/<Linux VDA RPM>
<!--NeedCopy-->

For Ubuntu/Debian:

sudo dpkg –i  <PATH>/<Linux VDA DEB>

apt-get install -f
<!--NeedCopy-->

For SUSE:

sudo zypper –i install <PATH>/<Linux VDA RPM>
<!--NeedCopy-->

Step 3d: Enable repositories to install the tdb-tools package

For RHEL 7 server:

subscription-manager repos --enable=rhel-7-server-optional-rpms
<!--NeedCopy-->

For RHEL 7 workstation:

subscription-manager repos --enable=rhel-7-workstation-optional-rpms
<!--NeedCopy-->

Step 3e: (For RHEL and CentOS only) Install the EPEL repository that can offer ntfs-3g

Install the EPEL repository on RHEL 8, RHEL 7, and CentOS 7. For information on how to install EPEL, see the instructions at https://docs.fedoraproject.org/en-US/epel/.

Step 3f: (For SUSE only) Manually install ntfs-3g

On the SUSE platform, no repository provides ntfs-3g. Download the source code, compile, and install ntfs-3g manually:

1. Install the GNU Compiler Collection (GCC) compiler system and the make package:

   sudo zypper install gcc
   sudo zypper install make
   <!--NeedCopy-->
   

2. Download the ntfs-3g package.

3. Decompress the ntfs-3g package:

   sudo tar -xvzf ntfs-3g_ntfsprogs-<package version>.tgz
   <!--NeedCopy-->
   

4. Enter the path to the ntfs-3g package:

   sudo cd ntfs-3g_ntfsprogs-<package version>
   <!--NeedCopy-->
   

5. Install ntfs-3g:

   ./configure
   make
   make install
   <!--NeedCopy-->
   

Step 3g: Edit the MCS configuration files

1. Change variables in /etc/xdl/mcs/mcs.conf.

   • For non-domain-joined scenarios

     For non-domain-joined scenarios, you can leave variables in /etc/xdl/mcs/mcs.conf unspecified or change the following variables as required:

     DOTNET_RUNTIME_PATH=path-to-install-dotnet-runtime
     DESKTOP_ENVIRONMENT= gnome | mate
     VDA_PORT=port-number
     REGISTER_SERVICE=Y | N
     ADD_FIREWALL_RULES=Y | N
     HDX_3D_PRO=Y | N
     VDI_MODE=Y | N
     SITE_NAME=dns-site-name | ‘<none>’
     SEARCH_BASE=search-base-set | ‘<none>’
     START_SERVICE=Y | N
     TELEMETRY_SOCKET_PORT=port-number
     TELEMETRY_PORT=port-number

     Tip:

     The AD_INTEGRATION variable in /etc/xdl/mcs/mcs.conf is set to Winbind by default. The default value has no impact on non-domain-joined scenarios.

   • For domain-joined scenarios

     Change variables in /etc/xdl/mcs/mcs.conf. The mcs.conf configuration file provides variables for setting MCS and the Linux VDA. The following are variables that you can set as required:

     • Use_Existing_Configurations_Of_Current_VDA: Determines whether to use the existing AD-related configuration files (/etc/krb5.conf, /etc/sssd.conf, and /etc/samba/smb.conf) of the currently running VDA. If set to Y, the configuration files on MCS-created machines are the same as the equivalents on the currently running VDA. However, you still must configure the dns and AD_INTEGRATION variables. The default value is N, which means the configuration templates on the master image determine the configuration files on MCS-created machines.

     • dns: Sets the IP address for each DNS server. You can set up to four DNS servers.

     • NTP_SERVER: Sets the IP address for your NTP server. Unless otherwise specified, it’s the IP address of your domain controller.

     • WORKGROUP: Sets the workgroup name to the NetBIOS name (case-sensitive) that you configured in AD. Otherwise, MCS uses the part of the domain name that immediately follows the machine hostname as the workgroup name. For example, if the machine account is user1.lvda.citrix.com, MCS uses lvda as the workgroup name while citrix is the correct choice. Ensure that you set the workgroup name correctly.

     • AD_INTEGRATION: Sets Winbind, SSSD, PBIS, or Centrify. For a matrix of the Linux distributions and domain joining methods that MSC supports, see Supported distributions in this article.

     • CENTRIFY_DOWNLOAD_PATH: Sets the path for downloading the Server Suite Free (formerly Centrify Express) package. The value takes effect only when you set the AD_INTEGRATION variable to Centrify.

     • CENTRIFY_SAMBA_DOWNLOAD_PATH: Sets the path for downloading the Centrify Samba package. The value takes effect only when you set the AD_INTEGRATION variable to Centrify.

     • PBIS_DOWNLOAD_PATH: Sets the path for downloading the PBIS package. The value takes effect only when you set the AD_INTEGRATION variable to PBIS.

     • UPDATE_MACHINE_PW: Enables or disables automating machine account password updates. For more information, see Automate machine account password updates.

     • The following Linux VDA configuration variables:

       DOTNET_RUNTIME_PATH=path-to-install-dotnet-runtime \
       DESKTOP_ENVIRONMENT= **gnome | mate \**
       SUPPORT_DDC_AS_CNAME=**Y | N**
       VDA_PORT=port-number
       REGISTER_SERVICE=**Y | N**
       ADD_FIREWALL_RULES=**Y | N**
       HDX_3D_PRO=**Y | N**
       VDI_MODE=**Y | N**
       SITE_NAME=**dns-site-name | ‘<none>’**
       LDAP_LIST=**‘list-ldap-servers’ | ‘<none>’**
       SEARCH_BASE=**search-base-set | ‘<none>’**
       FAS_LIST=**‘list-fas-servers’ | ‘<none>’**
       START_SERVICE=**Y | N**
       TELEMETRY_SOCKET_PORT=port-number
       TELEMETRY_PORT=port-number

     For an example of mcs.conf, see the following screen capture:

     

2. Run /opt/Citrix/VDA/sbin/deploymcs.sh.

3. On the template machine, add command lines to the /etc/xdl/mcs/mcs_local_setting.reg file for writing or updating registry values as required. This action prevents the loss of data and settings every time an MCS-provisioned machine restarts.

   Each line in the /etc/xdl/mcs/mcs_local_setting.reg file is a command for setting or updating a registry value.

   For example, you can add the following command lines to the /etc/xdl/mcs/mcs_local_setting.reg file to write or update a registry value respectively:

   create -k "HKLM\System\CurrentControlSet\Control\Citrix\VirtualChannels\Clipboard\ClipboardSelection" -t "REG_DWORD" -v "Flags" -d "0x00000003" --force
   <!--NeedCopy-->
   

   update -k "HKLM\System\CurrentControlSet\Control\Citrix\VirtualChannels\Clipboard\ClipboardSelection" -v "Flags" -d "0x00000003"
   <!--NeedCopy-->
   

Step 3h: Create a master image

1. Run /opt/Citrix/VDA/sbin/deploymcs.sh.

2. (If you are using a currently running VDA as the template VM, skip this step.) On the template VM, update the configuration templates to customize the relevant /etc/krb5.conf, /etc/samba/smb.conf, and /etc/sssd/sssd.conf files on all created VMs.

   For Winbind users, update the /etc/xdl/mcs/winbind_krb5.conf.tmpl and /etc/xdl/mcs/winbind_smb.conf.tmpl templates.

   For SSSD users, update the /etc/xdl/mcs/sssd.conf.tmpl, /etc/xdl/mcs/sssd_krb5.conf.tmpl, and /etc/xdl/mcs/sssd_smb.conf.tmpl templates.

   For Centrify users, update the /etc/xdl/mcs/centrify_krb5.conf.tmpl and /etc/xdl/mcs/centrify_smb.conf.tmpl templates.

   Note:

   Keep the existing format used in the template files and use variables such as $WORKGROUP, $REALM, $realm, ${new_hostname}, and $AD_FQDN.

3. Create and name a snapshot of your master image based on the public cloud you use.

   • (For Citrix Hypervisor, GCP, and VMware vSphere) Install applications on the template VM and shut down the template VM. Create and name a snapshot of your master image.

   • (For Azure) Install applications on the template VM and shut down the template VM from the Azure portal. Ensure that the power status of the template VM is Stopped (deallocated). Remember the name of the resource group here. You need the name to locate your master image on Azure.

     

   • (For AWS) Install applications on the template VM and shut down the template VM from the AWS EC2 portal. Ensure that the instance state of the template VM is Stopped. Right-click the template VM and select Image > Create Image. Type information and make settings as needed. Click Create Image.

     

   • (For Nutanix) On Nutanix AHV, shut down the template VM. Create and name a snapshot of your master image.

     Note:

     You must prefix Acropolis snapshot names with XD_ for use in Citrix Virtual Apps and Desktops. Use the Acropolis console to rename your snapshots when needed. After you rename a snapshot, restart the Create Catalog wizard to obtain a refreshed list.

(For GCP) Step 3i: Configure Ethernet connection on RHEL 8.x

After you install the Linux VDA on RHEL 8.x hosted on GCP, the Ethernet connection might be lost and the Linux VDA might be unreachable after a VM restart. To work around the issue, run the following commands before restarting the VM:

nmcli dev connect eth0
systemctl NetworkManager restart
<!--NeedCopy-->

Step 4: Create a machine catalog

In Citrix Studio, create a machine catalog and specify the number of VMs to create in the catalog. When creating the machine catalog, choose your master image. The following are examples:

On the Container page that is unique to Nutanix, select the container that you specified for the template VM earlier. On the Master Image page, select the image snapshot. On the Virtual Machines page, check for the number of virtual CPUs and the number of cores per vCPU.

Note:

If your machine catalog creation process on the Delivery Controller takes a significant amount of time, go to Nutanix Prism and power on the machine prefixed with Preparation manually. This approach helps to continue the creation process.

Do other configuration tasks as needed. For more information, see Create a machine catalog by using Studio.

Step 5: Create a delivery group

A delivery group is a collection of machines selected from one or more machine catalogs. It specifies which users can use those machines, and the applications and desktops available to those users. For more information, see Create delivery groups.

Use MCS to update your Linux VDA

To use MCS to update your Linux VDA, do the following:

1. Ensure that you have installed .NET Runtime 6.0 before you update your Linux VDA to the current release.

2. update your Linux VDA on the template machine:

   Note:

   You can also use the Linux VDA self-update feature to schedule automatic software updates. To achieve this goal, add command lines to the etc/xdl/mcs/mcs_local_setting.reg file on the template machine. For example, you can add the following command lines:

   create -k "HKLM\System\CurrentControlSet\Control\Citrix\SelfUpdate" -t "REG_DWORD" -v "fEnabled" -d "0x00000001" –force
   
   create -k "HKLM\System\CurrentControlSet\Control\Citrix\SelfUpdate" -t "REG_SZ" -v "ScheduledTime" -d "Immediately" –force
   
   create -k "HKLM\System\CurrentControlSet\Control\Citrix\SelfUpdate" -t "REG_SZ" -v "Url" -d "<Your-Azure-Container-Url>" –force
   
   create -k "HKLM\System\CurrentControlSet\Control\Citrix\SelfUpdate" -t "REG_SZ" -v "CaCertificate" -d "<Local-Certificate-Path-of-PortalAzureCom>" --force
   <!--NeedCopy-->
   

   For RHEL 7 and CentOS 7:

   sudo rpm -U XenDesktopVDA-<version>.el7_x.x86_64.rpm
   <!--NeedCopy-->
   

   For RHEL 8/CentOS 8/Rocky Linux 8:

   sudo rpm -U XenDesktopVDA-<version>.el8_x.x86_64.rpm
   <!--NeedCopy-->
   

   For SUSE:

   sudo rpm -U XenDesktopVDA-<version>.sle12_x.x86_64.rpm
   <!--NeedCopy-->
   

   For Ubuntu 18.04:

   sudo dpkg -i xendesktopvda_<version>.ubuntu18.04_amd64.deb
   <!--NeedCopy-->
   

   For Ubuntu 20.04:

   sudo dpkg -i xendesktopvda_<version>.ubuntu20.04_amd64.deb
   <!--NeedCopy-->
   

3. Edit /etc/xdl/mcs/mcs.conf and /etc/xdl/mcs/mcs_local_setting.reg.

4. Take a new snapshot.

5. In Citrix Studio, select the new snapshot to update your machine catalog. Wait before each machine restarts. Do not restart a machine manually.

Automate machine account password updates

Machine account passwords, by default, expire 30 days after the machine catalog is created. To prevent password expiration and to automate machine account password updates, do the following:

1. Add the following entry to /etc/xdl/mcs/mcs.conf before running /opt/Citrix/VDA/sbin/deploymcs.sh.

   UPDATE_MACHINE_PW="enabled"

2. After running /opt/Citrix/VDA/sbin/deploymcs.sh, open /etc/cron.d/mcs_update_password_cronjob to set the update time and frequency. The default setting updates machine account passwords weekly at 2:30AM, Sunday.

After each machine account password update, the ticket cache on the Delivery Controller becomes invalid and the following error might appear in /var/log/xdl/jproxy.log:

[ERROR] - AgentKerberosServiceAction.Run: GSSException occurred. Error: Failure unspecified at GSS-API level (Mechanism level: Checksum failed)

To eliminate the error, clear the ticket cache regularly. You can schedule a cache cleanup task on all Delivery Controllers or on the domain controller.

Enable FAS on MCS-created VMs

You can enable FAS on MCS-created VMs that run on the following distributions:

Enable FAS when you are preparing a master image on the template VM

1. Import the root CA certificate.

   sudo cp root.pem /etc/pki/CA/certs/
   <!--NeedCopy-->
   

2. Run ctxfascfg.sh. For more information, see Run ctxfascfg.sh.

3. Set variables in /etc/xdl/mcs/mcs.conf.

   Note:

   Set all necessary variables in /etc/xdl/mcs/mcs.conf because these variables are called upon VM startup.

   1. Set the value of Use_Existing_Configurations_Of_Current_VDA to Y.
   2. Set the FAS_LIST variable to your FAS server address or multiple FAS server addresses. Separate multiple addresses with semicolons and enclose the address or addresses with single quotes, for example, FAS_LIST='<FAS_SERVER_FQDN>;<FAS_SERVER_FQDN>'.
   3. Set the other variables as required, such as VDI_MODE.

4. Run the script /opt/Citrix/VDA/sbin/deploymcs.sh.

Enable FAS on an MCS-created VM

If FAS is not enabled on the template machine as described earlier, you can enable FAS on each MCS-created VM.

To enable FAS on an MCS-created VM, do the following:

1. Set variables in /etc/xdl/mcs/mcs.conf.

   Note:

   Set all necessary variables in /etc/xdl/mcs/mcs.conf because these variables are called upon VM startup.

   1. Set the value of Use_Existing_Configurations_Of_Current_VDA to Y.
   2. Set the FAS_LIST variable to your FAS server address.
   3. Set the other variables as required, such as VDI_MODE.

2. Import the root CA certificate.

   sudo cp root.pem /etc/pki/CA/certs/
   <!--NeedCopy-->
   

3. Run the /opt/Citrix/VDA/sbin/ctxfascfg.sh script. For more information, see Run ctxfascfg.sh.