System requirements

Note:

Learn about product name changes in What’s new.

When planning your installation, Citrix recommends that you allow at least an additional 2 GB of RAM for StoreFront over and above the requirements of any other products installed on the server. The subscription store service requires a minimum of 5 MB disk space, plus approximately 8 MB for every 1000 application subscriptions. All other hardware specifications must meet the minimum requirements for the installed operating system.

Citrix has tested and provides support for StoreFront installations on the following platforms:

  • Windows Server 2016 Datacenter and Standard editions
  • Windows Server 2012 R2 Datacenter and Standard editions

Upgrading the operating system version on a server running StoreFront is not supported. Citrix recommends that you install StoreFront on a new installation of the operating system. All the servers in a multiple server deployment must run the same operating system version with the same locale settings. StoreFront server groups containing mixtures of operating system versions and locales are not supported. While a server group can contain a maximum of six servers, from a capacity perspective based on simulations, there is no advantage of server groups containing more than three servers. All servers in a server group must reside in the same location.

Microsoft Internet Information Services (IIS) and Microsoft .NET Framework are required on the server. If either of these prerequisites is installed but not enabled, the StoreFront installer enables them before installing the product. Windows PowerShell and Microsoft Management Console, which are both default components of Windows Server, must be installed on the web server before you can install StoreFront. The relative path to StoreFront in IIS must be the same on all the servers in a group.

The StoreFront installer will add the IIS features it requires. If you pre-install these features, below is the required list:

On all platforms:

  • Web-Static-Content
  • Web-Default-Doc
  • Web-Http-Errors
  • Web-Http-Redirect
  • Web-Http-Logging
  • Web-Mgmt-Console
  • Web-Scripting-Tools
  • Web-Windows-Auth
  • Web-Basic-Auth
  • Web-AppInit
  • Web-Asp-Net45
  • Net-Wcf-Tcp-PortSharing45

StoreFront uses the following ports for communications. Ensure your firewalls and other network devices permit access to these ports.

  • TCP ports 80 and 443 are used for HTTP and HTTPS communications, respectively, and must be accessible from both inside and outside the corporate network.
  • TCP port 808 is used for communications between StoreFront servers and must be accessible from inside the corporate network.
  • A TCP port randomly selected from all unreserved ports is used for communications between the StoreFront servers in a server group. When you install StoreFront, a Windows Firewall rule is configured enabling access to the StoreFront executable. However, since the port is assigned randomly, you must ensure that any firewalls or other devices on your internal network do not block traffic to any of the unassigned TCP ports.
  • TCP port 8008 is used by Citrix Workspace app for HTML5 or supported Citrix Receiver versions, where enabled, for communications from local users on the internal network to the servers providing their desktops and applications.

StoreFront supports both pure IPv6 networks and dual-stack IPv4/IPv6 environments.

Infrastructure requirements

Citrix has tested and provides support for StoreFront when used with the following Citrix product versions.

Citrix server requirements

StoreFront stores aggregate desktops and applications from the following products.

  • Citrix Virtual Apps and Desktops 7 1808
  • XenApp and XenDesktop 7.18
  • XenApp and XenDesktop 7.17
  • XenApp and XenDesktop 7.16
  • XenApp and XenDesktop 7.15 LTSR
  • XenApp and XenDesktop 7.14
  • XenApp and XenDesktop 7.6 LTSR

Citrix Gateway requirements

The following versions of Citrix Gateway (formerly NetScaler Gateway) can be used to provide access to StoreFront for users on public networks.

  • Citrix Gateway 12.1
  • NetScaler Gateway 12.0
  • NetScaler Gateway 11.x
  • NetScaler Gateway 10.5

Citrix Workspace app for HTML5 requirements

If you plan to enable users to access desktops and applications using Citrix Workspace app for HTML5 (formerly Citrix Receiver for HTML5) running on Receiver for Web sites, the following additional requirements apply.

For internal network connections, Citrix Workspace app for HTML5 enables access to desktops and applications provided by the following products.

  • Citrix Virtual Apps and Desktops 7 1808
  • XenApp and XenDesktop 7.18
  • XenApp and XenDesktop 7.17
  • XenApp and XenDesktop 7.16
  • XenApp and XenDesktop 7.15 LTSR
  • XenApp and XenDesktop 7.14
  • XenApp and XenDesktop 7.6 LTSR

For remote users outside the corporate network, Citrix Workspace app for HTML5 enables access to desktops and applications through the following versions of Citrix Gateway (formerly NetScaler Gateway).

  • Citrix Gateway 12.1
  • NetScaler Gateway 12.0
  • NetScaler Gateway 11.x

For users connecting through Citrix Gateway, Citrix Workspace app for HTML5 enables access to desktops and applications provided by the following products.

  • Citrix Virtual Apps and Desktops 7 1808
  • XenApp and XenDesktop 7.18
  • XenApp and XenDesktop 7.17
  • XenApp and XenDesktop 7.16
  • XenApp and XenDesktop 7.15 LTSR
  • XenApp and XenDesktop 7.14
  • XenApp and XenDesktop 7.6 LTSR

User device requirements

StoreFront provides a number of different options for users to access their desktops and applications. Citrix Workspace app users can either access stores through Citrix Workspace app, or use a web browser to log on to a Citrix Receiver for Web site for the store. For users who cannot install Citrix Workspace app, but have an HTML5-compatible web browser, you can provide access to desktops and applications directly within the web browser by enabling Citrix Workspace app for HTML5 on your Citrix Receiver for Web site.

Users with non-domain-joined desktop appliances access their desktops through their web browsers, which are configured to access Desktop Appliance sites. In the case of domain-joined desktop appliances and repurposed PCs running the Citrix Desktop Lock, along with older Citrix clients that cannot be upgraded, users must connect through the XenApp Services URL for the store.

If you plan to deliver offline applications to users, the Offline Plug-in is required in addition to Citrix Workspace app for Windows. If you want to deliver Microsoft Application Virtualization (App-V) sequences to users, a supported version of the Microsoft Application Virtualization Desktop Client is also required. For more information, see Managing Streamed Applications. Users cannot access offline applications or App-V sequences through Citrix Receiver for Web sites.

It is assumed that all user devices meet the minimum hardware requirements for the installed operating system.

Requirements for Citrix Workspace app-enabled stores

The following Citrix Workspace app (and Citrix Receiver) versions can be used to access StoreFront stores from both internal network connections and through Citrix Gateway. Connections through Citrix Gateway can be made using both the NetScaler Gateway Plug-in and/or clientless access. See Support for the unified Citrix Receiver experience.

Citrix Workspace app

Citrix Receiver

Requirements for access to stores through Citrix Receiver for Web sites

The following Citrix Workspace app, operating system, and web browser combinations are recommended for users to access Citrix Receiver for Web sites from both internal network connections and through Citrix Gateway. Connections through Citrix Gateway can be made using both the NetScaler Gateway Plug-in and clientless access.

Unless otherwise stated, the latest browser versions are recommended.

  • Citrix Receiver for Windows 4.9 and later, and Citrix Workspace app 1808 for Windows and later.
    • Windows 10 (32-bit and 64-bit editions)
      • Microsoft Edge
      • Internet Explorer 11
      • Google Chrome
      • Mozilla Firefox
    • Windows 8.1 (32-bit and 64-bit editions)
      • Internet Explorer 11 (32-bit mode)
      • Google Chrome
      • Mozilla Firefox
    • Windows 8 (32-bit and 64-bit editions)
      • Internet Explorer 10 (32-bit mode)
      • Google Chrome
      • Mozilla Firefox
    • Windows 7 Service Pack 1 (32-bit and 64-bit editions)
      • Internet Explorer 11, 10, 9
      • Google Chrome
      • Mozilla Firefox
    • Windows Embedded Standard 7 Service Pack 1 or Windows Thin PC
      • Internet Explorer 11, 10, 9
  • Citrix Receiver for Mac 12.0, and Citrix Workspace app 1808 for Mac and later.
    • Mac OS X 10.13 High Sierra
      • Safari 11
      • Google Chrome
      • Mozilla Firefox
    • Mac OS X 10.12 Sierra
      • Safari 11
      • Google Chrome
      • Mozilla Firefox
    • Mac OS X 10.11 El Capitan
      • Safari 9
      • Google Chrome
      • Mozilla Firefox
    • Mac OS X 10.10 Yosemite
      • Safari 8
      • Google Chrome
      • Mozilla Firefox
    • Mac OS X 10.9 Mavericks
      • Safari 7
      • Google Chrome
      • Mozilla Firefox
  • Citrix Receiver for Linux 13.x
    • Ubuntu 12.04 (32-bit) and 14.04 LTS (32-bit)
      • Google Chrome
      • Mozilla Firefox

Requirements for access to desktops and applications through Citrix Workspace app for HTML5

The following operating systems and web browsers are recommended for users to access desktops and applications using Citrix Workspace app for HTML5 running on Receiver for Web sites. Both internal network connections and connections through Citrix Gateway are supported. However, for connections from the internal network, Citrix Workspace app for HTML5 only enables access to resources provided by specific products. Additionally, specific versions of Citrix Gateway are required to enable connections from outside the corporate network. For more information, see Infrastructure requirements.

Unless otherwise stated, the latest browser versions are recommended.

  • Browsers
    • Microsoft Edge
    • Internet Explorer 11
    • Safari 11
    • Google Chrome
    • Mozilla Firefox
  • Operating systems
    • Windows 10 (32-bit and 64-bit editions)
    • Windows 8.1 (32-bit and 64-bit editions)
    • Windows 8 (32-bit and 64-bit editions)
    • Windows 7 Service Pack 1 (32-bit and 64-bit editions)
    • Windows Vista Service Pack 2 (32-bit and 64-bit editions)
    • Windows Embedded XP
    • Mac OS X 10.13 High Sierra
    • Mac OS X 10.12 Sierra
    • Mac OS X 10.10 Yosemite
    • Mac OS X 10.9 Mavericks
    • Mac OS X 10.8 Mountain Lion
    • Google Chrome OS 48
    • Google Chrome OS 47
    • Ubuntu 16.04 (32-bit)
    • Ubuntu 12.04 (32-bit)

Requirements for access to stores through Desktop Appliance sites

The following Citrix Receiver (now Citrix Workspace app), operating system, and web browser combinations are recommended for users to access Desktop Appliance sites from the internal network. Connections through Citrix Gateway are not supported.

  • Citrix Receiver for Windows 4.9 and later, and Citrix Workspace app 1808 for Windows and later.
    • Windows 8.1 (32-bit and 64-bit editions)
      • Internet Explorer 11 (32-bit mode)
    • Windows 8 (32-bit and 64-bit editions)
      • Internet Explorer 10 (32-bit mode)
    • Windows 7 Service Pack 1 (32-bit and 64-bit editions), Windows Embedded Standard 7 Service Pack 1, or Windows Thin PC
      • Internet Explorer 9 (32-bit mode)
      • Internet Explorer 8 (32-bit mode)
    • Windows Embedded XP
      • Internet Explorer 8 (32-bit mode)

Requirements for access to stores through XenApp Services URLs

All the versions of Citrix Receiver listed above can be used to access StoreFront stores with reduced functionality through XenApp Services URLs. Connections through Citrix Gateway, where supported, can be made using both the NetScaler Gateway Plug-in and clientless access.

Smart card requirements

Requirement for using Citrix Receiver for Windows 4.x, and Citrix Workspace app 1808 for Windows and later, with smart cards

Citrix tests for compatibility with the U.S. Government Dept. Of Defense Common Access Card (CAC), U.S. National Institute of Standards and Technology Personal Identity Verification (NIST PIV) cards, and some USB smart card tokens. You can use contact card readers that comply with the USB Chip/Smart Card Interface Devices (CCID) specification and are classified by the German Zentraler Kreditausschuss (ZKA) as Class 1 smart card readers. ZKA Class 1 contact card readers require that users insert their smart cards into the reader. Other types of smart card readers, including Class 2 readers (which have keypads for entering PINs), contactless readers, and virtual smart cards based on Trusted Platform Module (TPM) chips, are not supported.

For Windows devices, smart card support is based on Microsoft Personal Computer/Smart Card (PC/SC) standard specifications. As a minimum requirement, smart cards and card readers must be supported by the operating system and have received Windows Hardware Certification.

For more information about Citrix-compatible smart cards and middleware, see Smart cards in the Citrix Virtual Apps and Desktops documentation, and http://www.citrix.com/ready.

Requirements for authentication through Citrix Gateway

The following versions of Citrix Gateway can be used to provide access to StoreFront for users on public networks authenticating with smart cards.

  • Citrix Gateway 12.1
  • NetScaler Gateway 12.0
  • NetScaler Gateway 11.x
  • NetScaler Gateway 10.5

System requirements