Installation
eLux® can be installed directly on a device’s flash memory or on a hard disk. The installation procedure is a form of recovery installation and can be performed in two ways:
-
From USB stick: for all supported operating system versions, we provide an eLux USB Stick image, available for download on our myelux.com portal, for creating an installation stick.
-
Via PXE recovery: for large environments, PXE-capable devices can be installed over the network if the eLux software container and Scout Enterprise Management Suite® are already installed.
Both procedures are described in detail in our short guide eLux Recovery procedures.
Installation in a VM
eLux can be installed in a VM (Virtual Machine). Depending on the virtualization solution, specific settings need to be activated.
Note:
It is recommended to use at least 16 GB of storage. The eLux ISO image needs to be mapped as a drive for the installation.
XenServer®
| Setting | Value |
|---|---|
| Guest OS | Ubuntu Jammy Jellyfish 22.04 (Ubuntu) |
| Boot Mode | UEFI Boot |
Note:
See also eLux 7 2503 VM on XenServer as a reference.
VMware
Types: vSphere, Fusion, Workstation
| Setting | Value |
|---|---|
| Guest OS | Other (64-bit) |
| Boot Option - Firmware | (U)EFI |
Virtual Box
| Setting | Value |
|---|---|
| Type | Linux |
| Subtype | Ubuntu |
| Version | Ubuntu (64-bit) |
| Extended feature | Enable I/O APIC |
| Extended feature | Enable EFI |