Install and uninstall

You can download Citrix Workspace app from the Download page of Citrix or from your company’s download page (if available).

You can install the package by:

• Running an interactive Windows-based installation wizard.

  Or

• Typing the installer file name, installation commands, and installation properties using the command-line interface. For information about installing Citrix Workspace app using command-line interface, see Using command-line parameters.

Note:

Verify that you have installed all the required system requirements, as mentioned at System requirements section.

Installation with administrator and non-administrator privileges:

Both users and administrators can install Citrix Workspace app. Administrator privileges are required only when using pass-through authentication, single sign-on, App Protection, and Citrix Ready workspace hub with Citrix Workspace app for Windows..

The following table describes the differences when Citrix Workspace app is installed as an administrator or a user:

Note:

Administrators can override the user-installed instance of Citrix Workspace app and continue with the installation successfully.

Command to cleanup and install Citrix Workspace app

Use the /CleanInstall command to cleanup any leftover traces such as files and registry values from a previous uninstall and then freshly install the new version of the Citrix Workspace app.

For example:

CitrixWorkspaceApp.exe /CleanInstall
<!--NeedCopy-->

User interface based installation

You can install Citrix Workspace app for Windows by manually running the CitrixWorkspaceApp.exe installer package.

1. Launch the CitrixWorkspaceApp.exe file.

   The system verifies the prerequisites required for Citrix Workspace app and if requires, installs it automatically.

    

   After installing the prerequisites, the Welcome to Citrix Workspace Installer screen appears.

2. Click Continue. The Citrix License Agreement page appears.
3. Read and accept the Citrix License Agreement and continue with the installation. Citrix Workspace app installation continues and successfully completes.
4. When installing with administrator privileges, if required to enable the App Protection feature select the Start App Protection after installation checkbox. Citrix Workspace app installation continues and successfully completes.

Important:

Starting with Citrix Workspace app for Windows 2311.1 version, the TrolleyExpress is replaced with CWAInstaller-<date and timestamp>. For example, the log is recorded at C:\Program Files (x86)\Citrix\Logs\CTXWorkspaceInstallLogs-20231225-093441.

Using Windows Store

1. Navigate to Microsoft Store.
2. Search for Citrix Workspace.

1. Click Get. Citrix Workspace app is installed.

Command-line based installation

You can customize the Citrix Workspace app installer by specifying different command-line options. The installer package self-extracts to the system temp directory before launching the setup program. The space requirement includes program files, user data, and temp directories after launching several applications.

To install the Citrix Workspace app using the Windows command line, launch the command prompt and type the following on a single line:

• installer file name,
• installation commands, and
• installation properties

The available installation commands and properties are as follows:

CitrixWorkspaceApp.exe [commands] [properties]

List of command-line parameters

The parameters are broadly classified as follows:

• Common parameters
• Update parameters
• Install parameters
• HDX features parameters
• Preferences and user interface parameters
• Authentication parameters

Common parameters

Note:

The forceinstall switch is the replacement for the rcu switch. The rcu switch is deprecated as of Version 1909. For more information, see Deprecation.

Auto-update parameters

Detect available update

• Command: AutoUpdateCheck
• Description: This command indicates that Citrix Workspace app detects when an update is available.

The possible values are the following:

Note:

The AutoUpdateCheck is a mandatory parameter that you must set to configure other parameters like AutoUpdateStream, DeferUpdateCount, AURolloutPriority.

Select the version for update

• CommandAutoUpdateStream
• Description - If you have enabled auto-update, you can choose the version you want to update. See Lifecycle Milestones for more information.

The possible values are the following:

Defer notifications for update

• Command: DeferUpdateCount
• Description: Indicates the number of times that you can defer notifications when an update is available. For more information, see Citrix Workspace Updates.

The possible values are the following:

Note:

Starting with Citrix Workspace app for Windows version 2207, the auto-update feature is improved and the DeferUpdatCount parameter in not applicable.

Set rollout priority

• Command: AURolloutPriority
• Description: When a new version of the app is available, Citrix rolls out the update for a specific delivery period. With this parameter, you can control at what time during the delivery period you can receive the update.

The possible values are the following:

Store configuration parameters

Configure store

• Command: ALLOWADDSTORE
• Description: Allows you to configure the stores (HTTP or https) based on the specified parameter.

The possible values are the following:

Save the store credentials locally

• Command: ALLOWSAVEPWD
• Description: Allows you to save the store credentials locally. This parameter applies only to stores using the Citrix Workspace app protocol.

The possible values are the following:

Examples of store configuration using command-line installation

To specify the StoreFront store URL:

CitrixWorkspaceApp.exe /silent
STORE0="AppStore;https://testserver.net/Citrix/MyStore/discovery;on;HR App Store

<!--NeedCopy-->

To specify the Citrix Gateway store URL:

CitrixWorkspaceApp.exe  STORE0= HRStore;https://ag.mycompany.com#Storename;On;Store
<!--NeedCopy-->

Where, Storename indicates the name of the store that needs to be configured.

Note:

• In a multi-store setup, only one Citrix Gateway store URL configuration is allowed and that must be first in the list (parameter STORE0).
• The Citrix Gateway store URL configured using this method does not support the PNA Services Sites that are using Citrix Gateway.
• The “Discovery” parameter is not required when specifying a Citrix Gateway store URL.

To configure multiple stores:

CitrixWorkspaceApp.exe  STORE0= NetScaler Store;https://ag.mycompany.com#Storename;On;NetScaler Store
STORE1="StoreFront Store;https://testserver.net/Citrix/MyBackupStore/discovery;on; StoreFrontStore
<!--NeedCopy-->

Note:

• It’s mandatory to include discovery in the store URL for successful pass-through authentication.
• The Citrix Gateway store URL must be the first entry in the list of configured store URLs.

Install parameters

Start App Protection

• Command: startAppProtection
• Description: Start App Protection component and provides enhanced security by restricting the ability of clients to be compromised by keylogging and screen-capturing malware.
• Example: CitrixWorkspaceApp.exe startAppProtection

For more information, see App Protection.

Note:

The startAppProtection switch is the replacement for the includeAppProtection switch. The includeAppProtection switch is deprecated as of Version 2212. For more information, see Deprecation.

Exclude Citrix Enterprise Browser binaries

• Command: InstallEmbeddedBrowser
• Description: Excludes the Citrix Enterprise Browser binaries.
• Example: Run the InstallEmbeddedBrowser=N switch to exclude the embedded browser feature.

You can exclude the Citrix Enterprise Browser binaries only in the following cases:

• Fresh install
• Upgrade from a version that doesn’t include the Citrix Enterprise Browserbinaries.

If your version of Citrix Workspace app includes the Citrix Enterprise Browser binaries and you are upgrading to Version 2002, the Citrix Enterprise Browser binaries are automatically updated during the upgrade.

Specify custom installation directory

• Command: INSTALLDIR
• Description: Specifies the custom installation directory for Citrix Workspace app installation. The default path is C:\Program Files\Citrix.
• Example: CitrixWorkspaceApp.exe INSTALLDIR=C:\custom path\Citrix.

Note:

The Program Files folder is protected by the operating system. If you want to use a custom folder other than Program Files, ensure that the folder has the right permission and it is protected.

Install one or more of the specific components

• Command: ADDLOCAL
• Description: Use the ADDLOCAL key to install one or more of the specific components of the Citrix Workspace app. Using this key, if you install any specific components, the Citrix Workspace app installs all the mandatory components by default.

Note:

We recommended you to use the ADDLOCAL key only if you want to install any of the specific components of Citrix Workspace app. By default, if no ADDLOCAL parameter is specified, all the supported components are installed while installing the Citrix Workspace app.

The following table lists the components that the ADDLOCAL key supports:

For example, using the following command, you can install the components mentioned in the command:

CitrixWorkspaceapp.exe ADDLOCAL=ReceiverInside,ICA_Client,BCR_Client,USB,DesktopViewer,AM,SSON,SelfService,WebHelper,WorkspaceHub,CitrixEnterpriseBrowser
<!--NeedCopy-->

Note:

Starting with version 2212, the App Protection feature is installed by default. As a result, AppProtection is no longer a valid option for ADDLOCAL.

Install Citrix Casting

• Command: IncludeCitrixCasting
• Description: Installs Citrix Casting during installation.

For more information on Citrix Casting, see Citrix Casting.

HDX features parameters

Set bidirectional content redirection

• Command: ALLOW_BIDIRCONTENTREDIRECTION
• Description: Indicates if bidirectional content redirection between the client and the host is enabled. For more information, see the Bidirectional content redirection policy settings section in the Citrix Virtual Apps and Desktops documentation.

The possible values are the following:

Set local app access

• Command: FORCE_LAA
• Description: Indicates that Citrix Workspace app is installed with the client-side Local App Access component. Install the workspace app with administrator privileges for this component to work. For more information, see the Local App Access section in the Citrix Virtual Apps and Desktops documentation.

The possible values are the following:

Set URL redirection feature on the user device

• Command: ALLOW_CLIENTHOSTEDAPPSURL
• Description: Enables the URL redirection feature on the user device. For more information, see the Local App Access section in the Citrix Virtual Apps and Desktops documentation.

The possible values are the following:

Display icons for documents or files

• Command: LEGACYFTAICONS
• Description: Specifies if you want to display icons for documents or files that have file type association with subscribed applications.

The possible values are the following:

Preference and user interface parameters

Specify the directory for the shortcuts on the Start menu and desktop

Note:

When using the DESKTOPDIR option, set the PutShortcutsOnDesktop key to True.

Control access to the self-service

• Command: SELFSERVICEMODE
• Description: Controls access to the self-service Citrix Workspace app user interface.

The possible values are the following:

Control session pre-launch

• Command: ENABLEPRELAUNCH
• Description: Controls session pre-launch. For more information, see Application launch time.

The possible values are the following:

Hide Shortcuts and Reconnect option

• Command: DisableSetting
• Description: Hides the Shortcuts and Reconnect option from being displayed in the Advanced Preferences sheet. For more information, see Hiding specific settings from the Advanced Preferences sheet.

The possible values are the following:

Enable Customer Experience Improvement Program

• Command: EnableCEIP
• Description: Indicates your participation in the Customer Experience Improvement Program (CEIP). For more information, see CEIP.

The possible values are the following:

Enable always-on tracing

• Command: EnableTracing
• Description: Controls the Always-on tracing feature.

The possible values are the following:

Specify the name to identify the user device

• Command: CLIENT_NAME
• Description: Specifies the name used to identify the user device to the server.
• <ClientName> - Specifies the name used identify the user device on the server. The default name is %COMPUTERNAME%.
• Example: CitrixReceiver.exe CLIENT_NAME=%COMPUTERNAME%.

Set client name same as the computer name

• Command: ENABLE_DYNAMIC_CLIENT_NAME
• Description: Allows the client name to be the same as the computer name. When you change the computer name, the client name changes too.

The possible values are the following:

Authentication parameters

Include single sign-on

• Command: /includeSSON
• Description: Requires you to install as an administrator. Indicates that the Citrix Workspace app is installed with the single sign-on component. See Domain pass-through authentication for more information.
• Example: CitrixWorkspaceApp.exe /includeSSON

Note:

The includeSSON command supports only fresh installation of Citrix Workspace app.

Enable single sign-on

• Command: ENABLE_SSON
• Description: Enables single sign-on when the Citrix Workspace app is installed with the /includeSSON command. For more information, see Domain pass-through authentication.

The possible values are the following:

Uninstall Citrix Workspace app

Uninstall using Windows-based uninstaller

You can uninstall Citrix Workspace app for Windows from the Control Panel. For more information, see the Uninstall Citrix Workspace app for Windows section.

Note:

During Citrix Workspace app installation, you get a prompt to uninstall the Citrix HDX RTME package. Click OK to continue the uninstallation.

Uninstall using the command-line interface

You can uninstall Citrix Workspace app, from a command line by typing the following command:

CitrixWorkspaceApp.exe /uninstall
<!--NeedCopy-->

For silent uninstallation of Citrix Workspace app, run the following switch:

CitrixWorkspaceApp.exe /silent /uninstall
<!--NeedCopy-->

Note:

Citrix Workspace app installer doesn’t control GPO related registry keys, so they are kept after uninstallation. If you find any entries, update them using gpedit or delete them manually.

Troubleshooting

Error codes

• For installer related error codes, see MsiExec.exe and InstMsi.exe error messages.
• For system related error codes, see System error codes.

Installer log location

By default, the installer logs are located at the following location:

Note:

Starting with Citrix Workspace app for Windows 2311.1 version, the TrolleyExpress is replaced with CWAInstaller-<date and timestamp>. For example, the log is recorded at C:\Program Files (x86)\Citrix\Logs\CTXWorkspaceInstallLogs-20231225-093441.

Reset Citrix Workspace app

Resetting Citrix Workspace app restores the default settings.

The following items are reset when you reset Citrix Workspace app:

• All the configured accounts and stores.
• Apps delivered by the self-service plug-in, their icons, and registry keys.
• File type associations created by the self-service plug-in.
• Cached files and saved passwords.
• Per-user registry settings.
• Per-machine installations, and their registry settings.
• Citrix Gateway registry settings for Citrix Workspace app.

Run the following command from the command line interface to reset the Citrix Workspace app:

"C:\Program Files (x86)\Citrix\ICA Client\SelfServicePlugin\CleanUp.exe" -cleanUser
<!--NeedCopy-->

For silent reset, use the following command:

"C:\Program Files (x86)\Citrix\ICA Client\SelfServicePlugin\CleanUp.exe" /silent -cleanUser
<!--NeedCopy-->

Note:

Use uppercase U in the parameter.

Resetting Citrix Workspace app does not impact the following:

• Citrix Workspace app or plug-in installation.
• Per-machine ICA lockdown settings.
• Group policy object (GPO) administrative template configurations for Citrix Workspace app.