Product documentation
Citrix DaaS
View PDF

Create a Google Cloud Platform catalog

April 4, 2024
Contributed by: 
C

Create machine catalogs describes the wizards that create a machine catalog. The following information covers details specific to Google cloud environments.

Note:

Before creating a Google cloud platform (GCP) catalog, you need to finish creating a connection to GCP. See Connection to Google cloud environments.

Prepare a master VM instance and a persistent disk

Tip:

Persistent disk is the Google Cloud term for virtual disk.

To prepare your master VM instance, create and configure a VM instance with properties that match the configuration you want for the cloned VDA instances in your planned machine catalog. The configuration does not apply only to the instance size and type. It also includes instance attributes such as metadata, tags, GPU assignments, network tags, and service account properties.

As part of the mastering process, MCS uses your master VM instance to create the Google Cloud instance template. The instance template is then used to create the cloned VDA instances that comprise the machine catalog. Cloned instances inherit the properties (except the VPC, subnet, and persistent disk properties) of the master VM instance from which the instance template was created.

After configuring the properties of the master VM instance to your specifics, start the instance and then prepare the persistent disk for the instance.

We recommend that you manually create a snapshot of the disk. Doing so lets you use a meaningful naming convention to track versions, gives you more options to manage earlier versions of your master image, and saves time for machine catalog creation. If you do not create your own snapshot, MCS creates a temporary snapshot for you (which is deleted at the end of the provisioning process).

Enable zone selection

Citrix DaaS supports zone selection. With zone selection, you specify the zones where you want to create VMs. With zone selection, administrators can place sole tenant nodes across zones of their choice. To configure sole tenancy, you must complete the following on Google Cloud:

Reserve a Google Cloud sole-tenant node

To reserve a sole-tenant node, refer to the Google Cloud documentation.

Important:

A node template is used to indicate performance characteristics of the system that is reserved in the node group. Those characteristics include the number of vGPUs, the amount of memory allocated to the node, and the machine type used for machines created on the node. For more information see the Google Cloud documentation.

Create the VDA master image

To deploy machines on the sole-tenant node successfully, you need to take extra steps when creating a master VM image. Machine instances on Google Cloud have a property called node affinity labels. Instances used as master images for catalogs deployed to the sole-tenant node require a node affinity label that matches the name of the target node group. To achieve this, keep the following in mind:

Note:

If you intend to use sole tenancy with a shared VPC, see Shared Virtual Private Cloud.

Set a node affinity label when creating an instance

To set the node affinity label:

  1. In the Google Cloud console, navigate to Compute Engine > VM instances.

  2. On the VM instances page, select Create instance.

  3. On the Instance creation page, type or configure the required information and then select management, security, disks, networking, sole tenancy to open the settings panel.

  4. On the Sole tenancy tab, select Browse to view the available node groups in the current project. The Sole-tenant node page appears, displaying a list of available node groups.

  5. On the Sole-tenant node page, select the applicable node group from the list and then select Select to return to the Sole tenancy tab. The node affinity labels field populates with the information you selected. This setting ensures that machine catalogs created from the instance will be deployed to the selected node group.

  6. Select Create to create the instance.

Set a node affinity label for an existing instance

To set the node affinity label:

  1. In the Google Cloud Shell terminal window, use the gcloud compute instances command to set a node affinity label. Include the following information in the gcloud command:

    • Name of the VM. For example, use an existing VM named s*2019-vda-base.*
    • Name of the node group. Use the node group name you previously created. For example, mh-sole-tenant-node-group-1.
    • The zone where the instance resides. For example, the VM resides in the *us-east-1b* zone.

    For example, type the following command in the terminal window:

    • gcloud compute instances set-scheduling "s2019-vda-base" --node-group="mh-sole-tenant-node-group-1" --zone="us-east1-b"

    For more information about the gcloud compute instances command, see the Google Developer Tools documentation at https://cloud.google.com/sdk/gcloud/reference/beta/compute/instances/set-scheduling.

  2. Navigate to the VM instance details page of the instance and verify that the Node Affinities field populates with the label.

Create a machine catalog

Note:

Create your resources before you create a machine catalog. Use the naming conventions established by Google Cloud when configuring machine catalogs. See Bucket and object naming guidelines for more information.

You can create a machine catalog in two ways:

Create a machine catalog using the Full Configuration interface

Follow the guidance in Create machine catalogs. The following description is unique to Google Cloud catalogs.

  1. From Manage > Full Configuration, select Machine Catalogs in the left pane.
  2. Select Create Machine Catalog in the action bar.
  3. On the Machine Type page, select Multi-session OS and then select Next. Citrix DaaS also supports single-session OS.
  4. On the Machine Management page, select the Machines that are power managed and the Citrix Machine Creation Services options and then select Next. If there are multiple resources, select one from the menu.

  5. On the Image page, complete these steps as needed, and then click Next.

    1. Select a snapshot or VM as the master image. If you want to use the sole tenancy functionality, be sure to select an image whose node group property is correctly configured. See Enable zone selection.

    2. To use an existing VM as the machine profile, select Use a machine profile, and then select the VM.

      Note:

      Currently, VMs in this catalog inherit the Disk encryption set ID, Machine size, Storage type, and Zone settings from the machine profile.

    3. Select the minimum functional level for the catalog.

  6. On the Storage page, select the type of storage used to contain the operating system for this machine catalog. Each of the following storage options has unique price and performance characteristics. An identity disk is always created using the zonal standard persistent disk.

    • Standard persistent disk
    • Balanced persistent disk
    • SSD persistent disk

    For details about Google Cloud storage options, see Storage options.

  7. On the Virtual Machines page, specify how many VMs you want to create, view the detailed specification of the VMs, select the Google Cloud machine type, and then select Next. If you use sole tenant node groups for machine catalogs, be sure to select only the zones where reserved sole tenant nodes are available. See Enable zone selection.

  8. On the Disk Settings page, you can configure the following settings:

    • Choose whether to enable write-back cache. After enabling write-back cache, you can do the following:

      • Configure the size of the disk and RAM used for caching temporary data. For more information, see Configure cache for temporary data.
      • Select the storage type for the write-back cache disk. The following storage options are available to use for the write-back cache disk:
        • Standard persistent disk
        • Balanced persistent disk
        • SSD persistent disk

        For details about Google Cloud storage options, see Storage options.

      • Select the type for the write-back cache disk.
        • Use non-persistent write-back cache disk. If selected, the write-back cache disk does not persist for the provisioned VMs. The disk is deleted during power cycles and any data redirected to the disk will be lost.
        • Use persistent write-back cache disk. If selected, the write-back cache disk persists for the provisioned VMs. Enabling this option increases your storage costs.

    • When MCS storage optimization (MCS I/O) is enabled, you can choose whether to retain system disks for VDAs during power cycles. For more information, see Enabling MCS storage optimization updates.

    • Choose whether to use your own key to protect disk contents. To use the feature, you must first create your own Customer Managed Encryption Keys (CMEKs). For more information, see Using Customer Managed Encryption Keys (CMEK).

      Note:

      It is available only in the Manage > Full Configuration interface.

      After creating the keys, you can select one of those keys from the list. You cannot change the key after you create the catalog. Google Cloud does not support rotating keys on existing persistent disks or images. Therefore, after you provision a catalog, the catalog is tied to a specific version of the key. If that key is disabled or destroyed, the instances and disks encrypted with it become unusable until the key is reenabled or restored.

  9. On the Machine Identities page, select an Active Directory account and then select Next.

    • If you select Create new Active Directory accounts, select a domain and then enter the sequence of characters representing the naming scheme for the provisioned VM computer accounts created in the Active Directory. The account naming scheme can contain 1–64 characters, and cannot contain blank spaces, or non-ASCII or special characters.
    • If you select Use existing Active Directory accounts, select Browse to navigate to the existing Active Directory computer accounts for the selected machines.

  10. On the Domain Credentials page, select Enter credentials, type the user name and password, select Save, and then select Next.

    • The credential you type must have permissions to perform Active Directory account operations.

  11. On the Scopes page, select scopes for the machine catalog and then select Next.

    • You can select optional scopes or select custom scope to customize scopes as needed.

  12. On the Summary page, confirm the information, specify a name for the catalog, and then select Finish.

    Note:

    The catalog name can contain 1–39 characters, and cannot contain only blank spaces or the characters \ / ; : # . * ? = < > | [ ] { } " ' ( ) ' ).

Machine catalog creation might take a long time to complete. When it completes, the catalog is listed. You can verify that the machines are created on the target node groups in the Google Cloud console.

Import manually created Google Cloud machines

Using this feature, you can:

  • Import manually created Google Cloud multi-session OS machines into a Citrix DaaS catalog.
  • Remove manually created Google Cloud multi-session OS machines from a Citrix DaaS catalog.
  • Use existing Citrix DaaS power management capabilities to power manage Google Cloud Windows multi-session OS machines. For example, set a restart schedule for those machines.

This functionality does not require changes to an existing Citrix DaaS provisioning workflow, nor the removal of any existing feature.

It is recommended that you use MCS to provision machines in Citrix DaaS’s Full Configuration interface instead of importing manually created Google Cloud machines.

Shared Virtual Private Cloud

Shared Virtual Private Clouds (VPCs) comprise a host project, from which the shared subnets are made available, and one or more service projects that use the resource. Shared VPCs are desirable options for larger installations because they provide centralized control, usage, and administration of shared corporate Google cloud resources. For more information, see the Google Documentation site.

With this feature, Machine Creation Services (MCS) supports provisioning and managing machine catalogs deployed to Shared VPCs. This support, which is functionally equivalent to the support currently provided in local VPCs, differs in two areas:

  • You must grant extra permissions to the Service Account used to create the host connection. This process allows MCS to access and use Shared VPC Resources. See New permissions required.
  • You must create two firewall rules, one each for ingress and egress. These firewall rules are used during the image mastering process. See Firewall Rules.

For information on configuring shared VPC, see Configure the shared VPC.

New permissions required

A Google Cloud service account with specific permissions is required when creating the host connection. These additional permissions must be granted to any service accounts used to create Shared VPC based host connections.

Tip:

These additional permissions are not new to Citrix DaaS. They are used to facilitate the implementation of local VPCs. With Shared VPCs, these additional permissions allow access to other shared VPC resources.

A maximum of four extra permissions must be granted to the service account associated with the host connection to support Shared VPC:

  • compute.firewalls.list - This permission is mandatory. It allows MCS to retrieve the list of firewall rules present on the Shared VPC.
  • compute.networks.list - This permission is mandatory. It allows MCS to identify the Shared VPC networks available to the service account.
  • compute.subnetworks.list – This permission is optional depending on how you use VPCs. It allows MCS to identify the subnets within the visible Shared VPCs. This permission is already required when using local VPCs but must also be assigned in the Shared VPC host project.
  • compute.subnetworks.use - This permission is optional depending on how you use VPCs. It is necessary to use subnet resources in the provisioned machine catalogs. This permission is already required for using local VPCs but must also be assigned in the Shared VPC host project.

When using these permissions, consider that there are different approaches based on the type of permission used to create the machine catalog:

  • Project-level permission:
    • Allows access to all Shared VPCs within the host project.
    • Requires the permissions compute.subnetworks.list and compute.subnetworks.use must be assigned to the service account.
  • Subnet-level permission:
    • Allows access to specific subnets within the Shared VPC.
    • Permissions compute.subnetworks.list and compute.subnetworks.use are intrinsic to the subnet level assignment and therefore do not need to be assigned directly to the service account.

Select the approach that matches your organizational needs and security standards.

Tip:

For more information about the differences between project-level and subnet-level permissions, see Service Project Admins.

Firewall Rules

During the preparation of a machine catalog, a machine image is prepared to serve as the master image system disk for the catalog. When this process occurs, the disk is temporarily attached to a virtual machine. This VM must run in an isolated environment that prevents all inbound and outbound network traffic. This is accomplished through a pair of deny-all firewall rules; one for ingress and one for egress traffic. When using Google Cloud local VCPs, MCS creates this firewall in the local network and applies it to the machine for mastering. After mastering completes, the firewall rule is removed from the image.

We recommend keeping the number of new permissions required to use Shared VPCs to a minimum. Shared VPCs are higher-level corporate resources and typically have more rigid security protocols in place. For this reason, create a pair of firewall rules in the host project on the shared VPC resources, one for ingress and one for egress. Assign the highest priority to them. Apply a new target tag to each of these rules, using the following value:

citrix-provisioning-quarantine-firewall

When MCS creates or updates a machine catalog, it searches for firewall rules containing this target tag. It then examines the rules for correctness and applies them to the machine used to prepare the master image for the catalog. If the firewall rules are not found, or the rules are found but the rules or their priorities are incorrect, a message similar to the following appears:

"Unable to find valid INGRESS and EGRESS quarantine firewall rules for VPC <name> in project <project>. " Please ensure you have created 'deny all' firewall rules with the network tag ‘citrix-provisioning-quarantine-firewall' and proper priority." "Refer to Citrix Documentation for details."

Configure the shared VPC

Before adding the Shared VPC as a host connection in Citrix DaaS’s Full Configuration interface, complete the following steps to add service accounts from the project you intend to provision into:

  1. Create an IAM role.
  2. Add a service account to the host project IAM role.
  3. Add the cloud build service account to the shared VPC.
  4. Create firewall rules.

Create an IAM role

Determine the access level of the role:

  • Project level access, or
  • A more restricted model using subnet level access.

Project level access for IAM role. For the project level IAM role, include the following permissions:

  • compute.firewalls.list
  • compute.networks.list
  • compute.subnetworks.list
  • compute.subnetworks.use

To create a project level IAM role:

  1. In the Google Cloud console, navigate to IAM & Admin > Roles.
  2. On the Roles page, select CREATE ROLE.
  3. On the Create Role page, specify the role name. Select ADD PERMISSIONS.
    1. On the Add permissions page, add permissions to the role, individually. To add a permission, type the name of the permission in the Filter table field. Select the permission and then select ADD.
    2. Select CREATE.

Subnet-level IAM role. This role omits the addition of the permissions compute.subnetworks.list and compute.subnetworks.use after selecting CREATE ROLE. For this IAM access level, the permissions compute.firewalls.list and compute.networks.list must be applied to the new role.

To create a subnet level IAM role:

  1. In the Google Cloud console, navigate to VPC network > Shared VPC. The Shared VPC page appears, displaying the subnets of the Shared VPC networks that the host project contains.
  2. On the Shared VPC page, select the subnet that you want to access.
  3. In the top-right corner, select ADD MEMBER to add a service account.
  4. On the Add members page, complete these steps:
    1. In the New members field, type the name of your service account and then select your service account in the menu.
    2. Select the Select a role field and then Compute Network User.
    3. Select SAVE.
  5. In the Google Cloud console, navigate to IAM & Admin > Roles.
  6. On the Roles page, select CREATE ROLE.
  7. On the Create Role page, specify the role name. Select ADD PERMISSIONS.
    1. On the Add permissions page, add permissions to the role, individually. To add a permission, type the name of the permission in the Filter table field. Select the permission, and then select ADD.
    2. Select CREATE.

Add a service account to the host project IAM role

After creating an IAM role, do the following steps to add a service account for the host project:

  1. In the Google Cloud console, navigate to the host project and then to IAM & Admin > IAM.
  2. On the IAM page, select ADD to add a service account.
  3. On the Add members page:
    1. In the New members field, type the name of your service account and then select your service account in the menu.
    2. Select a role field, type the IAM role you created, and then select the role in the menu.
    3. Select SAVE.

The service account is now configured for the host project.

Add the cloud build service account to the shared VPC

Every Google Cloud subscription has a service account that is named after the project ID number, followed by cloudbuild.gserviceaccount. For example: 705794712345@cloudbuild.gserviceaccount.

You can determine the project ID number for your project by navigating to Cloud overview > Dashboard in the Google Cloud console. The project ID and project number are displayed on the project Dashboard Project info card:

Perform the following steps to add the Cloud Build service account to the Shared VPC:

  1. In the Google Cloud console, navigate to the host project and then to IAM & Admin > IAM.
  2. On the Permissions page, select ADD to add an account.
  3. On the Add members page, complete these steps:
    1. In the New members field, type the name of the Cloud Build service account and then select your service account in the menu.
    2. Select the Select a role field, type Computer Network User, and then select the role in the menu.
    3. Select SAVE.

Create firewall rules

As part of the mastering process, MCS copies the selected machine image and uses it to prepare the master image system disk for the catalog. During mastering, MCS attaches the disk to a temporary virtual machine, which then runs preparation scripts. This VM must run in an isolated environment that prohibits all inbound and outbound network traffic.

To create an isolated environment, MCS requires two deny all firewall rules (an ingress rule and an egress rule). Therefore, create two firewall rules (Ingress and Egress) in the Host Project as follows:

  1. In the Google Cloud console, navigate to the host project and then to VPC network > Firewall.
  2. On the Firewall page, select CREATE FIREWALL RULE.
  3. On the Create a firewall rule page, complete the following:
    • Name. Type a name for the rule.
    • Network. Select the Shared VPC network to which the ingress firewall rule applies.
    • Priority. The smaller the value is, the higher the priority of the rule is. We recommend a small value (for example, 10).
    • Direction of traffic. Select Ingress.
    • Action on match. Select Deny.
    • Targets. Use the default, Specified target tags.
    • Target tags. Type citrix-provisioning-quarantine-firewall.
    • Source filter. Use the default, IP ranges.
    • Source IP ranges. Type a range that matches all traffic. Type 0.0.0.0/0.
    • Protocols and ports. Select Deny all.
  4. Select CREATE to create the rule.
  5. Repeat the steps to create another rule. For Direction of traffic, select Egress.

Use Customer Managed Encryption Keys (CMEK)

You can use Customer Managed Encryption Keys (CMEK) for MCS catalogs. When using this functionality, you assign the Google Cloud Key Management Service CryptoKey Encrypter/Decrypter role to the Compute Engine Service Agent. Citrix DaaS account must have the correct permissions in the project where the key is stored. See Assign permissions to Citrix DaaS account. Refer to Helping to protect resources by using Cloud KMS keys for more information.

Your Compute Engine Service Agent is in the following form: service-<Project _Number>@compute-system.iam.gserviceaccount.com. This form is different than the default Compute Engine Service Account.

Note:

This Compute Engine Service Account might not appear in the Google Console IAM Permissions display. In such cases, use the gcloud command as described in Helping to protect resources by using Cloud KMS keys.

Assign permissions to Citrix DaaS account

Google Cloud KMS permissions can be configured in various ways. You can either provide project level KMS permissions or resource level KMS permissions. See Permissions and roles for more information.

Project level KMS permissions

One option is to provide Citrix DaaS account with project-level permissions to browse Cloud KMS resources. To do this, create a custom role, and add the following permissions:

  • cloudkms.keyRings.list
  • cloudkms.keyRings.get
  • cloudkms.cryptokeys.list
  • cloudkms.cryptokeys.get

Assign this custom role to your Citrix DaaS account. This allows you to browse regional keys in the relevant project in the inventory.

Resource level KMS permissions

For the other option, resource level permissions, in the Google Cloud console, browse to the cryptoKey you use for MCS provisioning. Add Citrix DaaS account to a key ring or a key that you use for catalog provisioning.

Tip:

With this option, you cannot browse regional keys for your project in the inventory because Citrix DaaS account does not have project-level list permissions on the Cloud KMS resources. However, you can still provision a catalog using CMEK by specifying the correct cryptoKeyId in the ProvScheme custom properties. See Create a catalog with CMEK using custom properties.

Rotating customer managed keys

Google Cloud does not support rotating keys on existing persistent disks or images. Once a machine is provisioned it is tied to the key version in use at the time it was created. However, a new version of the key can be created and that new key is used for newly provisioned machines or resources created when a catalog is updated with a new master image.

Important considerations about key rings

Key rings cannot be renamed or deleted. Also, you might incur unforeseen charges when configuring them. When deleting or removing a key ring, Google Cloud displays an error message:

Sorry, you can't delete or rename keys or key rings. We were concerned about the security implications of allowing multiple keys or key versions over time to have the same resource name, so we decided to make names immutable. (And you can't delete them, because we wouldn't be able to do a true deletion--there would still have to be a tombstone tracking that this name had been used and couldn't be reused).
We're aware that this can make things untidy, but we have no immediate plans to change this.
If you want to avoid getting billed for a key or otherwise make it unavailable, you can do so by deleting all the key versions; neither keys nor key rings are billed for, just the active key versions within the keys.
<!--NeedCopy-->

Tip:

For more information, see Editing or deleting a key ring from the console.

Uniform bucket-level access compatibility

Citrix DaaS is compatible with uniform bucket-level access control policy on Google Cloud. This functionality augments the use of IAM policy that grants permissions to a service account to allow for the manipulation of resources, including storage buckets. With uniform bucket level access control, Citrix DaaS allows you to use an access control list (ACL) to control access to storage buckets or objects stored in them. See Uniform bucket-level access for overview information about Google Cloud uniform bucket-level access. For configuration information, see Require uniform bucket-level access.

Use PowerShell

This section details how to do the following tasks using PowerShell:

Create a catalog with persistent write-back cache disk

To configure a catalog with persistent write-back cache disk, use the PowerShell command New-ProvScheme CustomProperties.

Tip:

Use the PowerShell parameter New-ProvScheme CustomProperties only for cloud-based hosting connections. If you want to provision machines using a persistent write-back cache disk for an on-premises solution (for example, XenServer) PowerShell is not needed because the disk persists automatically.

This command supports an extra property, PersistWBC, used to determine how the write-back cache disk persists for MCS provisioned machines. The PersistWBC property is only used when the UseWriteBackCache parameter is specified, and when the WriteBackCacheDiskSize parameter is set to indicate that a disk is created.

Note:

This behavior applies to both Azure and GCP where the default MCSIO write-back cache disk is deleted and re-created when power cycling. You can choose to persist the disk to avoid the deletion and recreation of MCSIO write-back cache disk.

Examples of properties found in the CustomProperties parameter before supporting PersistWBC include:

<CustomProperties xmlns="http://schemas.citrix.com/2014/xd/machinecreation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Property xsi:type="StringProperty" Name="UseManagedDisks" Value="true" />
<Property xsi:type="StringProperty" Name="StorageAccountType" Value="Premium_LRS" />
<Property xsi:type="StringProperty" Name="ResourceGroups" Value="benvaldev5RG3" />
</CustomProperties>
<!--NeedCopy-->

Note:

This example only applies to Azure. The properties are different in GCP environment.

When using these properties, consider that they contain default values if the properties are omitted from the CustomProperties parameter. The PersistWBC property has two possible values: true or false.

Setting the PersistWBC property to true does not delete the write-back cache disk when the Citrix DaaS administrator shuts down the machine from the management interface.

Setting the PersistWBC property to false deletes the write-back cache disk when the Citrix DaaS administrator shuts down the machine from the management interface.

Note:

If the PersistWBC property is omitted, the property defaults to false and the write-back cache is deleted when the machine is shut down from the management interface.

For example, using the CustomProperties parameter to set PersistWBC to true:

<CustomProperties xmlns="http://schemas.citrix.com/2014/xd/machinecreation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Property xsi:type="StringProperty" Name="UseManagedDisks" Value="true" />
<Property xsi:type="StringProperty" Name="StorageAccountType" Value="Premium_LRS" />
<Property xsi:type="StringProperty" Name="ResourceGroups" Value="benvaldev5RG3" />
<Property xsi:type="StringProperty" Name="PersistWBC" Value="true" />
</CustomProperties>
<!--NeedCopy-->

Important:

The PersistWBC property can only be set using the New-ProvScheme PowerShell cmdlet. Attempting to alter the CustomProperties of a provisioning scheme after creation has no impact on the machine catalog and the persistence of the write-back cache disk when a machine is shut down.

For example, set New-ProvSchemeto use the write-back cache while setting the PersistWBC property to true:

New-ProvScheme
-CleanOnBoot
-CustomProperties "<CustomProperties xmlns=`"http://schemas.citrix.com/2014/xd/machinecreation`" xmlns:xsi=`"http://www.w3.org/2001/XMLSchema-instance`"><Property xsi:type=`"StringProperty`" Name=`"UseManagedDisks`" Value=`"true`" /><Property xsi:type=`"StringProperty`" Name=`"StorageAccountType`" Value=`"Premium_LRS`" /><Property xsi:type=`"StringProperty`" Name=`"ResourceGroups`" Value=`"benvaldev5RG3`" /><Property xsi:type=`"StringProperty`" Name=`"PersistWBC`" Value=`"true`" /></CustomProperties>"
-HostingUnitName "adSubnetScale1"
-IdentityPoolName "BV-WBC1-CAT1"
-MasterImageVM "XDHyp:\HostingUnits\adSubnetScale1\image.folder\GoldImages.resourcegroup\W10MCSIO-01_OsDisk_1_a940e6f5bab349019d57ccef65d2c7e3.manageddisk"
-NetworkMapping @{"0"="XDHyp:\HostingUnits\adSubnetScale1\\virtualprivatecloud.folder\CloudScale02.resourcegroup\adVNET.virtualprivatecloud\adSubnetScale1.network"}
-ProvisioningSchemeName "BV-WBC1-CAT1"
-ServiceOffering "XDHyp:\HostingUnits\adSubnetScale1\serviceoffering.folder\Standard_D2s_v3.serviceoffering"
-UseWriteBackCache
-WriteBackCacheDiskSize 127
-WriteBackCacheMemorySize 256
<!--NeedCopy-->

Improve boot performance with MCSIO

You can improve boot performance for Azure and GCP managed disks when MCSIO is enabled. Use the PowerShell PersistOSDisk custom property in the New-ProvScheme command to configure this feature. Options associated with New-ProvScheme include:

<CustomProperties xmlns="http://schemas.citrix.com/2014/xd/machinecreation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Property xsi:type="StringProperty" Name="UseManagedDisks" Value="true" />
<Property xsi:type="StringProperty" Name="StorageAccountType" Value="Premium_LRS" />
<Property xsi:type="StringProperty" Name="Resource<!--NeedCopy-->
``````<!--NeedCopy-->
````````Groups" Value="benvaldev5RG3" />
<Property xsi:type="StringProperty" Name="PersistOsDisk" Value="true" />
</CustomProperties>
<!--NeedCopy-->

To enable this feature, set thePersistOSDisk custom property to true. For example:

New-ProvScheme
-CleanOnBoot
-CustomProperties "<CustomProperties xmlns=`"http://schemas.citrix.com/2014/xd/machinecreation`" xmlns:xsi=`"http://www.w3.org/2001/XMLSchema-instance`"><Property xsi:type=`"StringProperty`" Name=`"UseManagedDisks`" Value=`"true`" /><Property xsi:type=`"StringProperty`" Name=`"StorageAccountType`" Value=`"Premium_LRS`" /><Property xsi:type=`"StringProperty`" Name=`"ResourceGroups`" Value=`"benvaldev5RG3`" /><Property xsi:type=`"StringProperty`" Name=`"PersistOsDisk`" Value=`"true`" /></CustomProperties>"
-HostingUnitName "adSubnetScale1"
-IdentityPoolName "BV-WBC1-CAT1"
-MasterImageVM "XDHyp:\HostingUnits\adSubnetScale1\image.folder\GoldImages.resourcegroup\W10MCSIO-01_OsDisk_1_a940e6f5bab349019d57ccef65d2c7e3.manageddisk"
-NetworkMapping @{"0"="XDHyp:\HostingUnits\adSubnetScale1\\virtualprivatecloud.folder\CloudScale02.resourcegroup\adVNET.virtualprivatecloud\adSubnetScale1.network"}
-ProvisioningSchemeName "BV-WBC1-CAT1"
-ServiceOffering "XDHyp:\HostingUnits\adSubnetScale1\serviceoffering.folder\Standard_D2s_v3.serviceoffering"
-UseWriteBackCache
-WriteBackCacheDiskSize 127
-WriteBackCacheMemorySize 256
<!--NeedCopy-->

Create a catalog with CMEK using custom properties

When creating your Provisioning Scheme via PowerShell, specify a CryptoKeyId property in ProvScheme CustomProperties. For example:

'<CustomProperties xmlns="http://schemas.citrix.com/2014/xd/machinecreation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Property xsi:type="StringProperty" Name="CryptoKeyId" Value="<yourCryptoKeyId>" />
</CustomProperties>'
<!--NeedCopy-->

The cryptoKeyId must be specified in the following format:

projectId:location:keyRingName:cryptoKeyName

For example, if you’d like to use the key my-example-key in key ring my-example-key-ring in the region us-east1 and project with ID my-example-project-1, your ProvScheme custom settings would resemble:

'<CustomProperties xmlns="http://schemas.citrix.com/2014/xd/machinecreation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Property xsi:type="StringProperty" Name="CryptoKeyId" Value="my-example-project-1:us-east1:my-example-key-ring:my-example-key" />
</CustomProperties>'
<!--NeedCopy-->

All MCS provisioned disks and images related to this provisioning scheme use this customer managed encryption key.

Tip:

If you use global keys, the customer properties location must say global and not the region name, which in the example above is us-east1. For example: <Property xsi:type="StringProperty" Name="CryptoKeyId" Value="my-example-project-1:global:my-example-key-ring:my-example-key" />.

Create a machine catalog using a machine profile

When you create a catalog to provision machines using Machine Creation Services (MCS), you can use a machine profile to capture the hardware properties from a virtual machine and apply them to newly provisioned VMs in the catalog. When MachineProfile parameter is not used, the hardware properties are captured from the master image VM or snapshot. Some properties you define explicitly, for example, StorageType, CatalogZones and CryptoKeyId are ignored from machine profile.

  • To create a catalog with a machine profile, use the New-ProvScheme command. For example, New-ProvScheme –MachineProfile “path to VM”. If you do not specify the MachineProfile parameter, hardware properties are captured from the master image VM.
  • To update a catalog with a new machine profile, use the Set-ProvScheme command. For example, Set-ProvScheme –MachineProfile “path to new VM”. This command does not change the machine profile of the existing VMs in the catalog. Only the newly created VMs added to the catalog have the new machine profile.

  • You can also update the master image, however, when you update the master image, the hardware properties are not updated. If you want to update the hardware properties, you need to update the machine profile using Set-ProvScheme command. These changes will only apply to the new machines in the catalog. For updating the hardware properties of an existing machine, you can use the command Set-ProvVMUpdateTimeWindow with -StartsNow and -DurationInMinutes -1 parameters.

    Note:

    • StartsNow indicates that the scheduled start time is the current time.
    • DurationInMinutes with a negative number (for example, –1) indicates no upper bound on the schedule’s time window.

Create a machine catalog with machine profile as an instance template

You can select a GCP instance template as an input for the machine profile. Instance templates are lightweight resources in GCP, therefore, are very cost effective.

Create a new machine catalog with machine profile as an instance template

  1. Open a PowerShell window.
  2. Run asnp citrix* to load the Citrix-specific PowerShell modules.

  3. Find an instance template in your GCP project using the following command:

    cd XDHyp:\HostingUnits\<HostingUnitName>\instanceTemplates.folder
<!--NeedCopy-->

  4. Create a new machine catalog with machine profile as an instance template using NewProvScheme command:

    New-ProvScheme -ProvisioningSchemeName <CatalogName>  -HostingUnitName <HostingUnitName> -IdentityPoolName <identity pool name> -MasterImageVM
XDHyp:\HostingUnits\<HostingUnitName>\Base.vm\Base.snapshot -MachineProfile XDHyp:\HostingUnits\<HostingUnitName>\instanceTemplates.folder\mytemplate.template
<!--NeedCopy-->

    For more information on the New-ProvScheme command, see https://developer-docs.citrix.com/projects/citrix-daas-sdk/en/latest/MachineCreation/New-ProvScheme/.

  5. Finish creating the machine catalog using PowerShell commands.

Update a machine catalog to have an instance template as machine profile

  1. Open a PowerShell window.
  2. Run asnp citrix* to load the Citrix-specific PowerShell modules.

  3. Run the following command:

    Set-ProvScheme -ProvisioningSchemeName  <CatalogName> -MachineProfile XDHyp:\HostingUnits\<HostingUnitName>\instanceTemplates.folder\<TemplateName>.template
<!--NeedCopy-->

    For information on the Set-ProvScheme command, see https://developer-docs.citrix.com/projects/citrix-daas-sdk/en/latest/MachineCreation/Set-ProvScheme/.

Create a catalog with shielded VM

You can create an MCS machine catalog with shielded VM properties. A shielded virtual machine is hardened by a set of security controls that provide verifiable integrity of your Compute Engine instances, using advanced platform security capabilities like secure boot, a virtual trusted platform module, UEFI firmware and integrity monitoring.

MCS supports creating the catalog using the machine profile workflow. If you use machine profile workflow, then you must enable the shielded VM properties of a VM instance. You can then use this VM instance as a machine profile input.

Create an MCS machine catalog with shielded VM

  1. Enable shielded VM options of a VM instance in Google Cloud console. See Quickstart: Enable Shielded VM options.
  2. Create an MCS machine catalog with machine profile workflow by using the VM instance.
    1. Open a PowerShell window
    2. Run asnp citrix* to load the Citrix-specific PowerShell modules.
    3. Create an identity pool if not already created.

    4. Run the New-ProvScheme command. For example:

      New-ProvScheme -ProvisioningSchemeName <catalog-name>
-HostingUnitName gcp-hostint-unit
-MasterImageVM XDHyp:\HostingUnits\gcp-hostint-unit\catalog-vda.vm
-MachineProfile XDHyp:\HostingUnits\gcp-hostint-unit\catalog-machine.vm
<!--NeedCopy-->
  3. Finish creating the machine catalog.

Update a machine catalog with a new machine profile

  1. Run the Set-ProvScheme command. For example:

    Set-ProvScheme -ProvisioningSchemeName <catalog-name>
-MasterImageVM XDHyp:\HostingUnits\<hostin-unit>\catalog-vda.vm
-MachineProfile "DHyp:\HostingUnits\<hostin-unit>\catalog-machine.vm
<!--NeedCopy-->

To apply the change done in Set-ProvScheme to the existing VMs, run the Set-ProvVMUpdateTimeWindow command.

  1. Run Set-ProvVMUpdateTimeWindow command. For example:

    Set-ProvVMUpdateTimeWindow -ProvisioningSchemeName my-catalog -VMName <List-Of-Vm-Names> -StartsNow -DurationInMinutes -1
<!--NeedCopy-->

  2. Restart the VMs.

Google Cloud Marketplace

You can browse and select images offered by Citrix on Google Cloud Marketplace to create machine catalogs. Currently, MCS supports only the machine profile workflow for this feature.

To search for Citrix VDA VM product through Google Cloud Marketplace, go to https://console.cloud.google.com/marketplace/.

You can use a custom image or a Citrix ready image on Google Cloud Marketplace to update an image of a machine catalog.

Note:

If the machine profile does not contain storage type information, the value is derived from custom properties.

The supported Google Cloud Marketplace images are:

  • Windows 2019 Single Session
  • Windows 2019 Multi Session
  • Ubuntu

Example of using a Citrix ready image as a source for creating a machine catalog:

New-ProvScheme -ProvisioningSchemeName GCPCatalog \
-HostingUnitName GcpHu -IdentityPoolName gcpPool -CleanOnBoot \
-MasterImageVM XDHyp:\HostingUnits\GcpHu\images.folder\citrix-daas-win2019-single-vda-v20220819.publicimage \
-MachineProfile XDHyp:\HostingUnits\GcpHu\Base.vm
<!--NeedCopy-->

Where to go next

More information

Create a Google Cloud Platform catalog
April 4, 2024
Contributed by: 
C
April 4, 2024
Contributed by: 
C

In this article

Site feedback | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.