Product Documentation

Acciones automatizadas

Feb 01, 2017
You create automated actions in XenMobile to program a reaction to events, user or device properties, or the existence of apps on user devices. When you create an automated action, you establish the effect on the user's device when it is connected to XenMobile based on triggers in the action. When an event is triggered, you can send a notification to the user to correct an issue before more serious action is taken. 
For example, if you want to detect an app that you have previously blacklisted (for example, Words with Friends), you can specify a trigger that sets the user's device out of compliance when Words with Friends is detected on their device. The action then notifies them that they must remove the app to bring their device back into compliance. You can set a time limit for how long to wait for the user to comply before taking more serious action, such as selectively wiping the device.
In cases in which a user's device is put into an out of compliance state, and then the user fixes the device so that the device is in compliance, you will need to configure a policy to deploy a package that resets the device into a compliant state.
The effects that you set to happen automatically range from the following:
  • Fully or selectively wiping the device.
  • Setting the device to out of compliance.
  • Revoking the device.
  • Sending a notification to the user to correct an issue before more severe action is taken.
This article explains how to add, edit, and filter automated actions in XenMobile, as well as how to configure app lock and app wipe actions for MAM-only mode.


Before you can notify users, you must have configured notification servers in Settings for SMTP and SMS so that XenMobile can send the messages, see Notifications in XenMobile. Also, set up any notification templates you plan to use before proceeding. For details about setting up notification templates, see To create or update notification templates in XenMobile.

1. From the XenMobile console, click Configure Actions. The Actions page appears.

2. On the Actions page, do one of the following:

  • Click Add to add a new action.
  • Select an existing action to edit or delete. Click the option you want to use.

Note: When you select the check box next to an action, the options menu appears above the action list; when you click anywhere else in the list, the options menu appears on the right side of the listing.

3. The Action Information page appears.

4. On the Action Information page, enter or modify the following information:

  • Name: Type a name to uniquely identify the action. This field is required.
  • Description: Describe what the action is meant to do.

5. Click Next. The Action details page appears.

Note: The following example shows how to set up an Event trigger. If you select a different trigger, the resulting options will be different from those shown here.

localized image

6. On the Action details page, enter or modify the following information:

  • In the Trigger list, click the event trigger type for this action. The meaning of each trigger is as follows:
    • Event: Reacts to a predefined event.
    • Device property: Checks for a device attribute on the device gathered in MDM mode and reacts to it.
    • User property: Reacts to a user attribute, usually from Active Directory.
    • Installed app name: Reacts to an app being installed. Doesn't apply to MAM-only mode. Requires the app inventory policy to be enabled on the device. The app inventory policy is enabled on all platforms by default. For details, see To add an app inventory device policy.

7. In the next list, click the response to the trigger.

8. In the Action list, click the action to be performed when the trigger criterion is met. With the exception of Send notification, you choose a time frame in which users can resolve the issue that caused the trigger. If the issue is not resolved within that time frame, the selected action is taken. The available actions are as follows:

  • Selectively wipe the device: Erase all corporate data and apps from a device, leaving personal data and apps in place.
  • Completely wipe the device: Erase all data and apps from a device, including memory cards, if the device has one.
  • Revoke the device: Prohibit a device from connecting to XenMobile
  • App lock: Deny access to all apps on a device. On Android, users will not be able to log into XenMobile at all. On iOS, users will still be able to log in, but they will be unable to access apps. For more information, see "App lock and App wipe actions for MAM-only mode," later in this article.
  • App wipe: On Android, this deletes the user's XenMobile account. On iOS, this deletes the encryption key users need to be able to access XenMobile features. For more information, see "App lock and App wipe actions for MAM-only mode," later in this article.
  • Mark the device as out of compliance: Set the device as out of compliance.
  • Send notification: Send a message to the user.

If you pick Send notification, the remainder of this procedure explains how to send a notification action.

9. In the next list, select the template to use for the notification. Notification templates relevant to the selected event appear, unless a template doesn't yet exist for the notification type. In that case, you are prompted to configure a template with the message: No template for this event type. Create template using Notification Template in Settings.

Note: Before you can notify users, you must have configured notification servers in Settings for SMTP and SMS so that XenMobile can send the messages, see Notifications in XenMobile. Also, set up any notification templates you plan to use before proceeding. For details on setting up notification templates, see To create or update notification templates in XenMobile.

localized image

Note: After you select the template, you can preview the notification by clicking Preview notification message.

localized image

10. In the following fields, set the delay in days, hours, or minutes before taking action and the interval at which the action repeats until the user addresses the triggering issue.

localized image

11. In Summary, verify that you created the automated action as you intended.

localized image

12. After you configure the action details, you can configure deployment rules for each platform individually. To do so, complete step 13 for each platform you choose.

13. Configure deployment rules

14. When you are done configuring the platform deployment rules for the action, click Next. The Actions assignment page appears, where you assign the action to a delivery group or groups. This step is optional.

15. Next to Choose delivery groups, type to find a delivery group or select a group or groups in the list to which you want to assign the policy. The groups you select appear in the right-hand Delivery groups to receive app assignment list.

16. Expand Deployment Schedule and then configure the following settings:

  • Next to Deploy, click ON to schedule deployment or click OFF to prevent deployment. The default option is ON. If you choose OFF, no other options need to be configured.
  • Next to Deployment schedule, click Now or Later. The default option is Now.
  • If you click Later, click the calendar icon and then select the date and time for deployment.
  • Next to Deployment condition, click On every connection or click Only when previous deployment has failed. The default option is On every connection.
  • Next to Deploy for always-on connection, click ON or OFF. The default option is OFF.

    Note: This option applies when you have configured the scheduling background deployment key in Settings Server Properties. The always-on option is not available for iOS devices.

Note: The deployment schedule you configure is the same for all platforms. Any changes you make apply to all platforms, except for Deploy for always on connection, which does not apply to iOS.

17. Click Next. The Summary page appears, where you can verify the action configuration.

18. Click Save to save the action.

App lock and App wipe actions for MAM-only mode

You can wipe or lock apps on a device in response to all four categories of triggers listed in the XenMobile console: event, device property, user property and installed app name.

To configure automatic app wipe or app lock

1. In the XenMobile console, click Configure > Actions.

2. On the Actions page, click Add.

3. On the Action Information page, enter a name for the action and an optional description.

4. On the Action Details page, select the trigger you want.

5. In Action, select an action.

For this step, keep the following conditions in mind:

When the trigger type is Event and the value is not Active Directory disabled user, the App wipe and App lock actions will not appear.

When the trigger type is Device property and the value is MDM lost mode enabled, the following actions will not appear:

  • Selectively wipe the device
  • Completely wipe the device
  • Revoke the device

For each option, a 1 hour delay is automatically set, but you can select the delay period in minutes, hours or days. The delay gives users time to fix an issue if possible before the action is carried out. You can learn more about the App wipe and App lock actions in the topic on Configure roles with RBAC.


If you set the trigger to event, the repeat interval is automatically a minimum of 1 hour. The device must carry out a refresh of the policies to synchronize with the server for the notification to come in. Typically, a device synchronizes with the server when users sign on or manually refresh their policies through Secure Hub.

An additional delay of approximately 1 hour may occur before any action is carried out, to allow the Active Directory database to synchronize with XenMobile.

localized image

6. Configure deployment rules and then click Next.

7. Configure delivery group assignments and a deployment schedule and then click Next.

8. Click Save.

To check app lock or app wipe status

1. Go to Manage > Devices, click a device and then click Show more.

localized image

2. Scroll to Device App Wipe and Device App Lock.

localized image